What is the charging power of the Wuling Hongguang Mini?

Where is the Evaporative Emission Control Valve Located?

Evaporative emission valve is located on the pipeline between the carbon canister and the engine intake pipe. Below is the relevant introduction about the evaporator: 1. Working principle: The evaporator vaporizes the compressed and liquefied refrigerant, changing it from liquid to gas while absorbing heat, thereby lowering the temperature of the surrounding medium and serving a cooling function. 2. Composition: The evaporator consists of one or several sets of coils. 3. Maintenance: (1) Fins: Inspect the surface of the evaporator fins. If clogged with dirt, it should be cleaned (do not use water) and blown clean and dry with compressed air. If bent or deformed, use needle-nose pliers or a screwdriver to straighten them. (2) Pipes and threaded joints: Check the pipes and threaded joints. If cracked, damaged by foreign objects or the fan, or showing cracks or scratches, they should be replaced or repaired by welding.

19

5

Share

What is the function of engine oil in a car?

Engine oil serves the following purposes: 1. Lubrication to reduce wear: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush in the engine, which can easily cause wear. High-quality engine oil can form a sufficiently thick oil film between these two sliding surfaces, separating the relatively sliding parts to achieve the goal of reducing wear. 2. Cooling: Engine oil can carry heat back to the oil tank and then dissipate it into the air, assisting the radiator in cooling the engine. 3. Cleaning: Good engine oil can circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil. During normal use, engine oil will also have a certain consumption rate, so it is necessary to regularly check the oil level and its degree of contamination.

5

4

Share

What is the remote control matching method for the Volkswagen Santana Vista?

The remote control matching method for the Volkswagen Santana Vista is: Close all doors, press the central locking button on the driver's side to lock all four doors, insert the key into the ignition switch and turn it on and off three times, then remove it. The central locking system will activate once, and then press the lock button on the remote control. If the central locking system activates again, it indicates successful matching. The Santana Vista is a model under SAIC Volkswagen's Santana brand, with body dimensions of 4687mm in length, 1700mm in width, and 1450mm in height, and a wheelbase of 2656mm. The Santana Vista inherits the classic and elegant style of the Santana brand while perfectly integrating modern design elements, such as the chrome double-bar radiator grille, stylish dashboard, light-colored wood trim, beige interior theme, and leather seats, all of which exude a refined and elegant temperament.

18

1

Share

What is the long-distance fuel consumption of the Geely Jiaji PHEV?

Geely Jiaji is equipped with a plug-in hybrid system consisting of a 1.5T engine + electric motor + battery pack, with a comprehensive maximum horsepower of 258 hp and a peak torque of 385 N·m. The battery pack capacity is 11.3kWh. It is paired with a 7-speed wet dual-clutch transmission, and the MIIT comprehensive fuel consumption is only 1.6L/100km. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. Testing method: The test can be conducted on the road or on a chassis dynamometer, and then the fuel consumption per 100 kilometers is obtained through the 'flow meter method' or 'carbon balance method'.

15

2

Share

How to Remove Rusted Shaft and Sleeve?

Methods for removing rusted shafts and sleeves: 1. Tapping Method: Use tools to tap and vibrate the bearing out. When applying this method, pay attention to accurate tapping positions and moderate force. 2. Gas Cutting Method: This method causes destructive damage to the bearing. If the technique is not proficient, it may harm the shaft, so caution is required. 3. Pulling Method: Use a specialized removal tool, such as a hub bearing puller, which can be directly fixed to the hub, making the process simple, convenient, time-saving, and labor-saving. The sleeve is a cylindrical mechanical part fitted over the shaft and is a component of a sliding bearing. The sleeve and bearing housing adopt an interference fit, while the sleeve and shaft adopt a clearance fit. The end contacts components such as gears and bearings with compressive stress. Sometimes, to ensure the shaft can fit with standard parts like sealing rings and allow middle components to pass through the shaft end, the sleeve is designed to fit with the sealing ring, and the shaft can be made thinner to ensure the components can pass through.

17

2

Share

What is the horsepower of the Yuchai 4108?

The Yuchai 4108 engine, with the Yuchai code YC4D, is available in 120 horsepower, 130 horsepower, and 140 horsepower variants. Below are some details about the Yuchai 4108d: 1. Detail one: The four-cylinder engine mainly consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket. The basic principle of a four-cylinder engine is to convert the thermal energy of gasoline (diesel) into mechanical energy by pushing the piston to do work through the expansion of gas combustion in a sealed cylinder. 2. Detail two: The engine's power is not equal to the vehicle's power, as there are intermediate losses in mechanical transmission. Additionally, designs that increase the thickness and weight of the vehicle body for safety considerations can also lead to a loss of engine power. Therefore, vehicles equipped with small-displacement engines are not necessarily slower or inferior in performance compared to those with high-power engines.

19

3

Share

What is the charging power of the Wuling Hongguang Mini?

Where is the Evaporative Emission Control Valve Located?

What is the function of engine oil in a car?

What is the remote control matching method for the Volkswagen Santana Vista?

What is the long-distance fuel consumption of the Geely Jiaji PHEV?

How to Remove Rusted Shaft and Sleeve?

What is the horsepower of the Yuchai 4108?

Does a private car need to go through the inspection line in its 6th year?

What are the differences between the Corolla 1.2T and 1.5L?

How to Replace the Battery in an Audi Q5L Key?

What Problems Will Occur If a Car Relay Fails?