What is the charging power of the Chery Ant?

1 Answers
Louis
07/29/25 3:47pm
Chery Ant charging power is: 1. Pre-2019 models: The vehicle's onboard charger power is 3.5kw. 2. 2019 models: The vehicle's onboard charger power has been upgraded to 6.6kw, nearly doubling the power compared to older models. Information about the Chery Ant (eq1) is as follows: 1. Positioning: Positioned as a pure electric microcar with a comprehensive range of 150km, its maximum range can reach 180km (at constant 60km/h speed), and the top speed can reach 100km/h. 2. Charging speed: In fast charging mode, it takes 0.5-1.5 hours to reach 80% charge (charging speed is adjustable).
Was this review help?
15
2
Share
More Forum Discussions

What is Pragmatra Tire?

Pragmatra is a brand series under MAXXIS. The main label of Pragmatra tires is MP, currently available in two models: MP10 and MP15. Below are the detailed introductions: 1. MP10: Primarily focused on home safety, targeting general compact cars. Its features include: (1) Safety design, reliable and secure. The high-rigidity tread pattern design at the tire center significantly enhances vehicle stability and reduces braking distance. (2) Comfortable and smooth, quiet driving experience. The closed shoulder groove design prevents air flow, effectively reducing noise. (3) Durable and wear-resistant, balanced and practical. Uses a new high-wear-resistant tire compound to meet household wear demands; larger road contact area reduces uneven wear, extending tire lifespan. 2. MP15: A city SUV-specific tire integrating safety, wear resistance, and comfort, mainly designed for small and compact SUVs. Its features include: (1) Wear resistance index reaching 500, enhancing tire lifespan. (2) High-density siping design effectively shortens braking distance. (3) Symmetrical tread pattern design combines comfort performance.
11
2
Share

What Are the Symptoms of a Bad Motorcycle Clutch Plate?

The symptoms of a bad motorcycle clutch plate are: clutch slippage, inability to shift gears, incomplete power output, and accompanying abnormal noises; the clutch fails to disengage, leading to engine stalling as soon as a gear is engaged. A damaged clutch plate can cause significant harm to the motorcycle, so avoid forcing gear shifts and seek immediate repairs if the clutch is faulty. A detailed analysis of the symptoms of a bad motorcycle clutch plate is as follows: 1. Clutch Slippage: When the motorcycle clutch plate is damaged, the motorcycle may fail to move, with primary symptoms being clutch slippage, inability to shift gears, and incomplete power output. Forcing a gear shift is possible but risks damaging the gears and requires strenuous effort. Rapid throttle twisting results in increased RPM without a corresponding increase in power, accompanied by abnormal noises. Immediate repair at a service center is advised. 2. Clutch Fails to Disengage, Causing Engine Stall Upon Gear Engagement: The clutch is a key component of the engine, serving as a device to control power output. It smoothly separates the driving gear from the driven gear to achieve speed variation. Installed between the engine and the transmission, the clutch is the assembly in the vehicle's drivetrain that directly connects to the engine. Typically mounted with the engine crankshaft's flywheel group, the clutch is the component that cuts off and transmits power between the engine and the vehicle's drivetrain.
17
0
Share

Can a Water-Damaged Driver's License Still Be Used?

If a water-damaged driver's license does not affect the recognition of its information, it can still be used. Here are the relevant details: 1. Requirements for driver's licenses: If the driver's license is damaged and unreadable, it needs to be replaced. 2. Method for replacing a driver's license: Apply for a replacement using the same method as for a lost driver's license. Bring your ID card (submit a temporary residence permit if applying outside your registered residence) and two ID photos to the vehicle management office at the place where the license was issued. Obtain and fill out the "Motor Vehicle Driver's License Application Form" and the "Written Statement of Lost Driver's License," then submit them together to process the replacement.
8
3
Share

How to replace the battery of BYD F0?

The steps to replace the remote key battery of BYD F0 are: 1. Remove the mechanical key; 2. Use a flat-head screwdriver to pry open a small gap from the side of the key, then continue to pry along the gap; 3. Use the flat-head screwdriver to remove the old battery, insert the new battery with the positive side facing down, reinstall the circuit board, align the key cover, and press firmly with your hand to complete the process. Additional information: The car smart key is a common keyless entry system, also known as an intelligent key system. It consists of a transmitter, a remote central locking control module, a driving authorization system control module (three receivers), and related wiring harnesses that form the control system.
11
1
Share

What are the reasons for a sudden decrease in coolant?

The main reason for a sudden decrease in car coolant is a coolant leak. The causes of coolant leaks include radiator damage, poor sealing of the upper and lower water chambers; loose connections and poor sealing at the overflow tank, water pump interface, and cooling system pipelines; damaged cylinder gasket; warping at the joint between the cylinder head and the engine block or loose cylinder head bolts. Solutions for car coolant leaks: Replace the radiator; tighten the screws at the overflow tank, water pump interface, and cooling system pipelines; replace the cylinder gasket; tighten the cylinder head bolts. Method for replacing coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipelines, with a focus on the five-way hose. The five-way hose gets its name from having five connection interfaces for different parts. The coolant flows through the five-way hose and is distributed to various parts of the car to function. If there is a coolant leak in this part, the hose should be replaced or the interface re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject water into the reservoir to allow it to flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will be slightly pinkish. Continue adding clean water until the water coming out is clear. Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose, which allows the coolant to flow into the radiator quickly. Then add another bottle of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.
17
2
Share

Is Chevrolet a Domestic Car?

Chevrolet is not entirely a domestic car, and the domestically produced Chevrolets are joint-venture vehicles. The popular mid-size sedan under Chevrolet is the Malibu XL. Below is some information about this car: 1. The Malibu XL is a sporty B-segment car that has won consumer favor with its excellent exterior design and affordable price. 2. The new Malibu XL is equipped with two types of engines: a 1.3-liter turbocharged three-cylinder engine and a 2.0-liter turbocharged four-cylinder engine. 3. The Malibu XL has dimensions of 4933mm in length, 1854mm in width, and 1472mm in height, with a wheelbase of 2829mm.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.