···
Log in / Register

What is the channel number for Volkswagen engine coolant temperature?

3 Answers
Adaline
07/30/25 2:32am
060 is the channel number for electronic throttle matching in Volkswagen gasoline vehicles. Here are the specific details: 1. Scientific Vehicle Repair: Starting with an explanation of automotive circuit signals, it comprehensively covers waveform analysis of sensors, actuators, and automotive electrical components. 2. Automotive Data Stream: It describes the analysis methods for automotive data streams, then separately introduces data stream analysis for Volkswagen models, Nissan models, and General Motors' Buick sedans. Finally, it provides detailed case studies on automotive data control systems, specifically the M3.8.2 system. The data stream functionality allows reading the computer's operational data and displaying it in the form of data group numbers.
Was this review help?
3
1
Share
EllaRose
08/16/25 8:43am
I usually enjoy tinkering with automotive diagnostic equipment. In Volkswagen engines, the coolant temperature parameter ID in the OBD-II system is typically 05, which is hexadecimal 05. This means entering this number on the scanner allows you to read the coolant temperature data. However, the specific ID may vary depending on the vehicle model, year, and diagnostic tool. For example, older Golf models and newer Tiguan models might differ, and some specialized tools like VCDS use specific channels. It's recommended to connect an OBD scanner to the vehicle's interface and look for the coolant temperature parameter in the data stream menu. If you can't find it, refer to the vehicle manual or online forums for information specific to your model. Monitoring coolant temperature is crucial, as the normal range is 90-100 degrees Celsius. Overheating can cause engine damage, so regular checks can prevent major issues. When working on it yourself, ensure safety and avoid touching components when the engine is hot.
Was this review help?
12
2
Share
Expand All
DelPaul
10/21/25 6:49am
I have years of experience driving Volkswagen cars. The channel number for coolant temperature is usually 05 on most OBD diagnostic tools. I've used inexpensive Bluetooth scanners—just plug in, select the coolant temperature option, and it displays real-time readings. Different tools have varying interfaces, but the core channel number is similar (e.g., 05). If the tool shows an incorrect code, it might indicate a sensor or wiring issue. Immediate action is required if the temperature abnormally spikes above 120°C—stop the car and inspect the cooling system to prevent engine damage. I recommend keeping a basic scanner handy and routinely monitoring the dashboard temperature gauge; this habit can save major repair costs. Volkswagen's coolant temperature sensors are prone to aging, so a biennial check is advisable.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How much advance notice is required to cancel the Subject 3 exam?

At least one day in advance. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": If an applicant is unable to attend the exam at the scheduled time due to unforeseen circumstances, they must apply to cancel the appointment at least one day in advance. Failure to attend the exam at the scheduled time without prior cancellation will result in a failing grade for that exam attempt. Below is more relevant information: 1. The road driving skills test for Subject 3 generally includes: vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
1
2
Share

What is the Impact of Replacing Headlights on Used Cars?

Replacing the headlight assembly has no impact on the vehicle. As long as it is suitable for the model and the color temperature is within the legal range, the owner can use it with confidence. Car headlights are like human eyes, closely related to the safety of the driver. The use and maintenance of headlights should not be overlooked. Extended information about car lighting is as follows: 1. Headlights: The main purpose of headlights is to illuminate the road and objects in front of the vehicle to ensure driving safety. They can also be used to signal overtaking at night by alternating between high and low beams. Headlights are installed on both sides of the front of the car, with 2 or 4 units per vehicle. The bulb power is 45-60W for high beams and 25-55W for low beams. 2. Fog lights: Fog lights are installed near the headlights or slightly lower than the headlights. They are used in low visibility conditions such as fog, snow, heavy rain, or dust to illuminate the road and signal to oncoming vehicles. The light is mostly yellow because yellow light has a longer wavelength and good fog-penetrating properties. The bulb power is generally 35W.
7
4
Share

Can Motorcycles Go on Highways in Chengdu?

No. According to Article 41 of the "Sichuan Province Highway Regulations" (passed at the 18th meeting of the Standing Committee of the 12th People's Congress of Sichuan Province on September 25, 2015, and implemented from December 1, 2015): "Pedestrians, non-motorized vehicles, motorcycles, tractors, wheeled special machinery vehicles, articulated buses, full-trailer trucks, and other vehicles with a maximum design speed of less than 70 kilometers per hour are prohibited from entering highways." Additional information: Highways are fully enclosed roads with high traffic volume and speed, making it extremely unsafe for motorcycles to travel at high speeds. Any slight carelessness can lead to serious consequences. Besides highway conditions, wind resistance also affects the safe driving of motorcycles. Motorcycles are lightweight, and at high speeds, wind resistance, especially crosswinds generated when large vehicles pass by, poses significant risks. Motorcycle riders must be aware of the dangers of driving on highways.
6
1
Share

Is it advisable to change the test center after failing Subject 2 twice?

After failing Subject 2 twice, it is generally not recommended to change the test center if you have the option. Although you have failed twice at the same test center, this also means you are more familiar with it compared to others. With more practice, you might pass on your third attempt. Therefore, changing the test center at this stage is not a wise decision. Below is an introduction to Subject 2: 1. Reverse Parking: This assesses the driver's ability to maneuver the car in a real-world scenario. It involves correctly reversing the vehicle into a parking space from both sides while in motion. 2. Parallel Parking: Parallel parking is becoming increasingly common in urban areas, especially where parking spaces are limited. Many streets have converted sides into "parallel parking spots." 3. Hill Start and Stop: This is a key assessment point in Subject 2. It requires the driver to stop the vehicle at a fixed point on a slope with a 10% gradient and a 30-meter length, testing coordination between steering, braking, and clutch control. 4. Right-Angle Turn: This evaluates the driver's ability to correctly steer the vehicle through sharp turns, accurately judging the difference between the vehicle and the outer wheel. 5. Curve Driving: Also known as the S-turn, this test requires the vehicle to navigate a specified S-shaped road width without touching the edge lines, demonstrating smooth and controlled steering.
15
1
Share

What to Do When the Car Handbrake Won't Release?

When the car handbrake won't release, first use your right hand to hold the handbrake lever, lift it slightly, then press the handbrake button with your thumb and push the lever down. Note that during this process, do not release the button, otherwise the handbrake won't disengage. Handbrake usage: 1. Engaging the handbrake: After the car is stationary, hold the handbrake lever with your right hand and pull it up to about 70% of its height. There's no need to press the button while pulling. 2. Releasing the handbrake: To release, hold the handbrake lever with your right hand, place your thumb on the button, lift the lever slightly, press the button, and push the lever all the way down. Do not release the button while lowering the lever.
3
3
Share

Where is the Magotan fan control module located?

The Magotan fan control module is located on the fan motor. Below are specific reasons why the electric fan may not rotate: 1. Poor lubrication: If the motor is poorly lubricated, the fan won't rotate. Insufficient lubrication makes it difficult for the motor to drive the fan blades after installation. 2. Motor overheating: Overheating can reduce the motor's load-bearing capacity and effective power output, making it unable to drive the load. 4. Prolonged usage: Extended use of the fan can lead to motor wear and tear. When the motor's shaft sleeve wears out, it can easily burn out. This also increases the motor's internal resistance and reduces its load-bearing capacity, making it unable to rotate the fan blades.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.