···
Log in / Register

What is the cause of the odor inside the Leiling car?

3 Answers
GavinLee
08/27/25 7:04am
If an odor occurs during the use of the vehicle, it must be caused by damage or dirt and deterioration of related components. The following is relevant information: Car cleaning: Car cleaning refers to the cleaning of the exterior of the car, which is a frequent task for every car owner or driver. Car wash shops have gradually become a hot investment project in many large and medium-sized cities in recent years. Cleaning function: Create a good in-car environment for health protection and prolong the service life of the car interior. Car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing.
Was this review help?
3
0
Share
NolanRose
09/09/25 5:52am
I just bought a Corolla and noticed there's always an unpleasant smell in the car, mainly caused by the new car materials. The foam padding in the seats, plastic components on the dashboard, and adhesives under the floor mats all release pungent chemical odors when exposed to sunlight. The smell is especially strong when opening the car door after summer sun exposure - reportedly due to formaldehyde and benzene. Another issue is the cheap floor mats provided by the 4S dealer at delivery, which started emitting odors after just a few days. These rubber products made from recycled materials are particularly prone to releasing unpleasant smells. The solution is actually quite simple: frequent window ventilation and sun exposure works best. Putting several packs of activated charcoal in the trunk also helps, and using specialized cleaners on leather seats can make a noticeable difference.
Was this review help?
8
0
Share
Expand All
LeSamuel
10/23/25 6:44am
A veteran driver who has owned a Leiling for four years tells you that the odor is most likely caused by the air conditioning ducts. Last summer, my car had a sour smell, and when I took it to the repair shop, they found mold spots on the AC filter. The mechanic said that the evaporator tends to accumulate water when cooling, and after turning off the car, this damp environment becomes a breeding ground for mold. Some people also smoke in the car, and the nicotine mixed with AC dust gets sucked into the filter, eventually causing a tar-like stench. It’s recommended not to turn off the blower immediately after shutting off the engine—instead, turn off the AC 3-5 minutes early to let the airflow dry out the ducts. Replacing the filter every quarter doesn’t cost much, and you can easily buy a Mann filter on Taobao and replace it yourself in just three minutes.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What brand is Kapsen tires?

Kapsen is a tire brand under Compassson. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Installed on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee the vehicle's driving performance. The functions of tires are: 1. Directly contacting the road surface and working with the vehicle suspension to mitigate impacts during driving; 2. Ensuring good ride comfort and smooth driving; 3. Ensuring excellent adhesion between the wheels and the road surface; 4. Improving the vehicle's traction, braking, and off-road capabilities; 5. Bearing the weight of the vehicle. Tires can be categorized by their usage as follows: 1. Passenger tires; 2. Summer tires; 3. Summer high-performance tires; 4. Winter tires.
4
5
Share

Why does the Passat's autohold not respond when pressed?

Here are the reasons why the Passat's autohold does not respond when pressed: 1. The vehicle is not in the started state; 2. The door is not properly closed; 3. The ESP is not working properly; 4. The seat belt is not fastened. 5. If any of the above conditions exist, the autohold cannot be activated normally. Additional Information: 1. AUTO-HOLD is the function button for automatic parking, which is available in many models equipped with electronic (electronic handbrake) rear wheel braking systems. It refers to the function where the vehicle automatically enters the parking brake through the ABS/ESP control unit when needed. AUTO-HOLD relies on the intelligent braking system, and only vehicles with brake control systems like ESP can achieve the AUTO-HOLD function. 2. The AUTO-HOLD automatic parking function provides accurate parking force through the slope sensor by the controller. When starting, the parking control unit calculates information provided by the clutch distance sensor, clutch engagement speed sensor, throttle pedal sensor, etc. It automatically releases the parking brake when the driving force is greater than the driving resistance, allowing the car to start smoothly.
20
3
Share

Which gear should be used when driving a manual transmission car downhill?

For a manual transmission car, it is necessary to shift into the appropriate gear before going downhill, typically second or third gear. The lower the gear, the stronger the car's power and the slower the speed. Here are some relevant details: 1. When going downhill, you can use engine braking. This requires continuously downshifting while descending, combined with the foot brake to gradually reduce speed. First, use the brake pedal to slow down, then downshift as the speed decreases slightly. Repeat this process—braking, downshifting, and braking again—until you reach the lowest gear, then use intermittent braking to complete the descent. 2. When using engine braking downhill, be cautious. If the car is moving at high speed and suddenly shifts into a lower gear, the engine will rev sharply. Since the speed cannot increase further when the engine reaches its maximum RPM, although there is some braking effect, it can cause significant wear on the engine. 3. If the vehicle is equipped with HDC (Hill Descent Control), simply activate the system (by pressing the button). In theory, the driver does not need to press the brake pedal, as the vehicle will automatically move at a low speed and apply braking force to wheels exceeding safe RPM, ensuring a smooth descent.
3
1
Share

How to Replace the Wiper Blade on a Window Cleaner?

Use a Phillips screwdriver to remove the two screws on the window cleaner, open the cover plate, insert the rubber blade, close the cover plate, and tighten the screws. Due to the different structures of double-sided window cleaners, the installation methods of rubber wiper blades also vary. There are roughly three types: 1. The rubber wiper blade is installed inside the plastic shell. This structure requires using a screwdriver to unscrew the screws, open the plastic shell, remove the old blade, and replace it with a new one. Some window cleaners have circular decorative covers over the screws, which need to be pried off first. When replacing the blade, be careful not to disturb the internal magnetic steel. 2. The rubber wiper blade is inserted from the side. This structure only requires pulling out the blade from the side of the window cleaner and inserting a new one, without disassembling the product. Ensure the blade is inserted properly. 3. The rubber wiper blade is inserted from the middle of the plastic shell. This is a new structure that requires first removing the blade fixing piece, pulling out the blade from the middle of the shell, inserting a new blade, and then installing the blade fixing piece. This also does not require disassembling the product.
3
2
Share

What problems will occur if the car throttle is broken?

Throttle failure can cause the following issues in a car: 1. Unstable engine idle speed, persistently high idle speed, and difficulty in starting the engine, especially during cold starts; 2. No engine idle speed; 3. Insufficient engine power, poor acceleration performance, and unstable operation; 4. Black smoke from the car's exhaust pipe and increased fuel consumption. Here is some relevant information: The throttle is a controllable valve that regulates air intake into the engine, available in two types: traditional cable-operated and electronic throttle. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to produce power. The throttle is connected to the air filter at the top and the engine block at the bottom, often referred to as the "throat" of the car engine.
18
2
Share

Can Water Be Added to Vehicle Coolant?

Water can be added to automotive coolant. Coolant, fully known as antifreeze coolant, is designed to prevent freezing and cooling functions, protecting the radiator from cracking and the engine cylinder block from freezing damage when the vehicle is parked in cold seasons. Antifreeze is not only for winter use but should be used year-round. In regular vehicle maintenance, the engine coolant should be replaced every year. Precautions for adding and using coolant are as follows: 1. Coolant must be added when the engine is in a cold state. 2. In emergencies, if suitable coolant is unavailable, pure water can be added, but avoid adding hard water such as well water or river water. 3. Whenever the cylinder head, cylinder gasket, or radiator is replaced, the coolant must also be replaced. 4. Before winter arrives, check the coolant concentration and adjust it according to specifications to ensure sufficient antifreeze capability. 5. Both coolant and additives are toxic substances; avoid direct contact with skin and store them in a safe place.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.