What is the cause of the incomplete closing of the sunroof in the Audi Q5?

2 Answers
MiaFitz
07/28/25 11:05pm
Audi Q5 sunroof cannot be fully closed due to the following reasons: System operation issue: You can try repeatedly closing the sunroof while driving, press the button to tilt the sunroof, pull it down and forward, and then set it in the MMI system. Press and hold the lock button to close the windows. Excessive resistance in the mechanism: Overheating protection of the motor due to excessive resistance in the mechanism. This often happens after the car has been exposed to the sun in summer. Parking in a shaded area for a while can help. You can also add lubricant or adjust the sunroof. If the problem persists, please visit a 4S shop for inspection. Obstruction in the sunroof guide rails: There might be foreign objects in the sunroof guide rails or a malfunction in the sunroof motor. If there are obstructions or lack of lubrication in the guide rails, the resistance will be too high to close the sunroof. Simply lubricating the rails may solve the issue.
Was this review help?
16
5
Share
VanFernando
08/12/25 3:31am
I've been driving an Audi Q5 for several years and have also encountered the annoyance of the sunroof not closing properly. That time, it was because fallen leaves were stuck in the tracks, which got glued after the rain, causing the sunroof to stop halfway. The issue disappeared after I manually cleaned the tracks. This kind of malfunction is quite common—dust or debris accumulation in the tracks can easily cause blockages, and over time, it may damage the sealing ring, leading to leaks. Additionally, if the sensors are too sensitive, they might mistakenly trigger the anti-pinch function, stopping the operation, or the motor might be aging with insufficient power supply. I recommend wiping the tracks with a soft cloth monthly as a preventive measure and listening for any unusual noises when closing the window. Handle simple issues yourself, but for complex problems like electrical faults, go to the 4S shop to replace parts—don't delay to avoid damage to the interior from rain. With good maintenance, the sunroof will last longer.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

Is the Honda XRV compliant with China VI emission standards?

Honda XRV is compliant with China VI emission standards. The China VI emission standard, also known as the National Sixth Stage Emission Standard for Motor Vehicle Pollutants, is established to control vehicle pollutant emissions and improve ambient air quality. Honda XRV is a model under Dongfeng Honda, with body dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, and a wheelbase of 2610mm. In terms of exterior design, the Honda XRV features a full-width taillight with an embossed design, enhancing the vehicle's three-dimensional and layered appearance. Additionally, a silver skid plate is added below the bumper, improving the car's aesthetic appeal, making the overall appearance harmonious.
6
0
Share

How to Turn Off the Cruise Control Indicator Light?

Method to turn off the cruise control indicator light: Press the cruise control switch (control) button to turn it off. The cruise control buttons are generally located near the steering wheel. Cruise control is used to maintain a constant speed for the vehicle. When set to cruise mode, the engine's fuel supply is controlled by the computer, which adjusts the fuel supply based on road conditions to keep the vehicle at the set speed. Cruise control is automatically deactivated when the driver presses the brake pedal or clutch. Also known as speed control system or autonomous driving system, cruise control maintains the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a fixed speed.
19
2
Share

What are the body dimensions of the Lynk & Co 03?

The Lynk & Co 03 has body dimensions of 4658mm in length, 1840mm in width, and 1459mm in height, with a wheelbase of 2730mm, positioning it as a compact sedan. In terms of exterior design, the Lynk & Co 03 features solid and appealing side lines, a relatively small ground clearance giving it a slightly lowered stance, and a distinctive silver chrome trim running along the upper edge of the windows from the A-pillar to the C-pillar. Under the hood, the Lynk & Co 03 is equipped with three turbocharged engine options: a low-power 1.5-liter turbocharged engine, a high-power 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine.
20
5
Share

How to Set Up the Automatic Locking Function While Driving in the Tiguan L?

Tiguan L automatic locking function setup method: Find the CAR settings interface, locate the door lock control from the window switches, and click the automatic locking function to complete the setup. Through manual configuration, the automatic locking function is activated. When the vehicle speed reaches 15 kilometers per hour, the doors will automatically lock to ensure cabin safety. The Tiguan L is a model under SAIC Volkswagen, with body dimensions of 4712mm in length, 1839mm in width, and 1673mm in height, and a wheelbase of 2791mm. In terms of power, the Tiguan L offers two engine options: the 330TSI and 380TSI, equipped with the third-generation EA888 turbocharged engines in 1.8T and 2.0T displacements respectively.
6
4
Share

How to Deal with Electronic Parking Brake Failure?

Electronic parking brake failure is an issue that car owners cannot resolve on their own and requires repair at a 4S shop. The electronic parking brake, also known as the electronic handbrake, is commonly equipped in many mid-sized and compact cars. Unlike traditional mechanical handbrakes, the electronic handbrake system features two handbrake motors on the rear wheels. When the electronic handbrake button near the gear shift is pressed, these motors clamp the brake pads, preventing the car from rolling. The electronic parking brake is located on both rear wheels. If it fails, the car needs to be lifted, and the rear wheels must be removed for repair.
1
5
Share

What to Do When the Turn Signal Doesn't Make a Clicking Sound?

If the turn signal doesn't make a clicking sound, you must check whether the turn signal is still functioning. If it's not working, immediate repair is necessary. The turn signal is a crucial part of a car's lighting system, used during turns and lane changes. A malfunctioning turn signal poses significant safety risks. Additionally, if the turn signal flashes too rapidly, it indicates a fault that requires immediate attention. A car's lighting system includes headlights, turn signals, brake lights, width indicators, and fog lights. Among these, turn signals and brake lights are more prone to damage. Some vehicles have a warning light for lighting system faults; if any part of the lighting system fails, the dashboard warning light will illuminate, alerting the driver.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.