What is the cargo capacity in liters when the rear seats are fully folded down in the new Jimny?

What to Do When Car Windshield Washer Fluid Freezes?

Here are the solutions for frozen car windshield washer fluid: 1. If the freezing is not severe, you can start the car and let the engine's temperature gradually thaw it. 2. On sunny days, it's advisable to open the hood and let the sun help thaw the fluid. If the fluid isn't too frozen, it should thaw quickly. If it doesn't, adding some warm water (avoid boiling water) can help thaw the fluid. Once thawed, replace all the fluid to prevent future freezing. 3. If the freezing is severe and has already cracked the washer fluid reservoir, visit a repair station for assistance. During this period, avoid using the windshield washer function until the fluid has completely thawed.

2

0

Share

Where is the Jetta engine number located?

The engine number of the Volkswagen Jetta is located at the junction between the engine and the transmission, near the right side of the engine block. In addition to the above method, the engine number can also be found through the following four ways: The vehicle's driving license contains the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will also state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, refers to the production serial number of the engine, where each engine has a unique number that is different from all others. The engine number consists of four parts, each representing different meanings. The first part includes the product series code, generation symbol, and regional or manufacturer code, which are selected by the manufacturer as needed and must be approved and registered by the industry standardization authority. The middle part consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. The rear part includes symbols for structural features and usage characteristics. The tail part is a distinguishing symbol, used by the manufacturer to indicate modifications or other distinguishing factors within the same product series.

13

1

Share

What are the differences between the US version and Thailand version of BMW X5?

The differences between the Thailand version and US version of BMW X5 are as follows: The main difference between the two versions is that the US version comes with an air suspension, while the Thailand version does not. Additionally, the assembly quality of the US version is better than that of the Thailand version. In terms of exterior design, the US version integrates the rear turn signal and brake light, and features a yellow reflector on the front fender wheel arch, whereas the Thailand version has separate designs for the rear turn signal and brake light. Additional information: BMW's factory in Thailand is called the Rayong plant, which is responsible for the assembly of parts. BMW places great emphasis on the Chinese market, producing the X3 and X5 in Thailand primarily for the Chinese and Southeast Asian markets. This is because these two models are the best-selling imported SUVs in China, and Thailand's tariffs are significantly lower than those of the US, as are the wages of Thai workers compared to their US counterparts.

17

1

Share

How to Start the Mazda 3 When the Key Fob Battery is Dead?

Eject the mechanical key and enter the vehicle. Place the back of the smart key near the start button and press it. For vehicles with a push-button start, there is usually an induction zone inside the car where the smart key can be placed nearby, and the car can still be started. Relevant details are as follows: 1. After the Mazda 3 key fob battery dies, it should be replaced as soon as possible. The Mazda 3 comes with a remote key + mechanical key, where the mechanical key can be inserted into the remote key. All models are equipped with a keyless start system and remote start function. It is recommended that drivers avoid long-distance remote operations during daily use to conserve battery power. 2. Method for replacing the Mazda 3 key fob battery: First, pull out the mechanical key, insert a screwdriver into the groove, and slightly pry open the cover with the screwdriver. Insert the screwdriver into the gap between the cover and the transmitter, then pry it open and remove the back cover of the key. Remove the battery cover and then the battery. Install the new battery and cover the battery cover, ensuring the positive side of the battery faces upward. Finally, replace the key back cover and reset the mechanical key.

2

5

Share

How Often Should the Sagitar 1.6 Be Serviced?

The first maintenance for the Sagitar 1.6 is typically performed at six months or after driving 7,500 kilometers. Subsequent maintenance should be done every 15,000 kilometers or once a year. Below are the key points to note for Sagitar 1.6 maintenance: 1. The warranty period for the Volkswagen Sagitar is limited to 24 months or 50,000 kilometers, while the entire vehicle's repair warranty lasts for 36 months or 100,000 kilometers. 2. At every 30,000 kilometers, spark plugs, air filters, and fuel filters should be replaced. 3. Minor maintenance usually involves changing the engine oil and oil filter, as well as cleaning the air filter. Depending on the vehicle's condition, the coolant level, battery status, and lighting system may also be checked. 4. Major maintenance includes all items from minor maintenance plus additional maintenance tasks.

16

1

Share

What brand of tires does Volvo frequently use?

Volvo uses Michelin brand tires. The following are the specific details about the tires: 1. Tires are circular elastic rubber products installed on various vehicles or machinery that roll on the ground. 2. Tires are often used in complex and demanding conditions, bearing various load forces and high and low temperatures during driving, thus possessing high load-bearing performance, traction performance, and cushioning performance. 3. The main functions of tires are to support the entire weight of the vehicle, bear the load of the car; reduce and absorb the vibrations and impacts during driving, prevent car components from suffering severe vibrations and early damage, adapt to the high-speed performance of the vehicle, and reduce driving noise.

15

0

Share

What is the cargo capacity in liters when the rear seats are fully folded down in the new Jimny?

What to Do When Car Windshield Washer Fluid Freezes?

Where is the Jetta engine number located?

What are the differences between the US version and Thailand version of BMW X5?

How to Start the Mazda 3 When the Key Fob Battery is Dead?

How Often Should the Sagitar 1.6 Be Serviced?

What brand of tires does Volvo frequently use?

How many types of suspension systems are there?

What does 'lo' mean in car air conditioning?

How to downshift for overtaking without jerking?

How to Reset the Maintenance Reminder on a Ford Focus?