What is the car with three vertical bars as its logo in new energy vehicles?

1 Answers
FinleyMarie
07/29/25 10:38pm
Cars with three vertical bars as their logos include: WM Motor, Hyundai Veloster, Mudan Auto, and Lifan Motors. Details are as follows: WM Motor: WM Motor was established in 2015, headquartered in Shanghai, China. The company name is derived from the German term for world champion, and it is a rising domestic provider of new energy vehicle products and mobility solutions. Hyundai Veloster: The Hyundai Veloster originates from its namesake concept car, positioned as a unique sports car. Its design continues the fluidic sculpture-style family look, but compared to previous models, the Veloster's exterior design is bolder and incorporates more of Hyundai's new technologies. Mudan Auto: Mudan Auto was established in the late 1970s as a Chinese automotive brand, primarily producing buses. It is one of the country's major bus manufacturers and the first company in the industry to be listed in Hong Kong. Lifan Motors: Lifan Motors is located in the Chongqing Automobile Park. All of Lifan Motors' product lines have achieved export success, from sedans to SUVs and even Lifan micro cars, with all products participating in global market competition.
Was this review help?
14
2
Share
More Forum Discussions

Do Cars Need Water? How Often Should It Be Added?

Cars do not require water; they need to use specialized coolant. Relevant information is as follows: Engine: The engines used in cars are all water-cooled engines, which rely on coolant continuously circulating within the engine to dissipate heat. The coolant has two circulation paths within the engine: one is the major cycle, and the other is the minor cycle. When the engine is just started, the coolant undergoes the minor cycle, during which it does not pass through the radiator to dissipate heat, helping the engine to warm up quickly. After the engine runs for a while and reaches normal operating temperature, the coolant switches to the major cycle, passing through the radiator to dissipate heat, thereby maintaining the engine within the normal operating temperature range. Coolant: The coolant needs to be replaced periodically. If not replaced for a long time, the coolant's freezing point may rise, and its boiling point may drop, affecting the engine's normal operation. Therefore, it is essential to regularly replace the coolant during routine car use. When replacing the coolant, ensure that the old coolant in the cooling system is completely drained before adding new coolant.
7
0
Share

What is the difference between forward parking and reverse parking?

Forward parking involves moving forward in first gear when exiting the parking space, judging the distance using ground markings or other markers, then turning the steering wheel fully to the right. When the car body is perpendicular to the parking space (i.e., the car is straight), the steering wheel should be straightened. Reverse parking involves moving forward in first gear when exiting, turning the steering wheel fully to the left at the same point where you would turn right in forward parking, then slightly adjusting the steering wheel back during the process. The degree of adjustment depends on the driver and vehicle conditions, typically around 90 degrees before turning fully again. Proceed to the designated position without straightening the steering wheel. When entering the parking space in forward parking, turn the steering wheel fully to the right when the intersection of the movable window and the fixed glass on the right rear seat aligns with the corner of the parking space, then stop at the designated point using the rearview mirror. For reverse parking, keep the steering wheel fully turned and judge the distance using the left rearview mirror, adjusting as necessary. Exiting and entering in forward parking: Exiting: During practice, the vehicle is usually parked in the parking space. When exiting, move forward in first gear, judge the distance using ground markings or other markers, then turn the steering wheel fully to the right. When the car body is perpendicular to the parking space (i.e., the car is straight), straighten the steering wheel. The distance between the right side of the car and the parking space should be about 1.5 meters when exiting. Entering: Different coaches may have different markers for turning the steering wheel. When the intersection of the movable window and the fixed glass on the right rear seat aligns with the corner of the parking space, turn the steering wheel fully to the right, then stop at the designated point using the rearview mirror. Since different vehicles and drivers may have varying reference points, learners need to continuously adjust based on what they observe. Exiting and entering in reverse parking: Exiting: Move forward in first gear, turn the steering wheel fully to the left at the same point where you would turn right in forward parking, then slightly adjust the steering wheel back during the process. The degree of adjustment depends on the driver and vehicle conditions, typically around 90 degrees before turning fully again. Proceed to the designated position without straightening the steering wheel. Entering: Keep the steering wheel fully turned and judge the distance using the left rearview mirror, adjusting as necessary. Once the rear of the vehicle enters the parking space and the car body is straight, straighten the steering wheel, then stop at the designated point.
7
2
Share

What does x1000r/min mean?

x1000r/min refers to the unit of engine speed. Below are some relevant details about engines: 1. Optimal State: Generally, the speed ranges between 1000~3500 rpm, with the engine delivering maximum torque around 3000 rpm, after which it inversely correlates with speed. 2. Impact of Speed: The engine speed affects the number of work cycles per unit time or the effective power output of the engine, meaning the effective power varies with different speeds. Therefore, when specifying the effective power of an engine, the corresponding speed must also be indicated.
19
2
Share

Does the day of passing count in the 10-day period for Subject One?

For those who have passed Subject One, they can schedule the Subject Two exam after 10 days. The day of passing Subject One does not count as a full natural day, so that day is not included. Passing score for Subject One: The total duration of the Subject One exam is 45 minutes. The exam consists of 100 questions, including true/false and single-choice questions, with a full score of 100 and a passing score of 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Standards". Exam process: Follow the staff's instructions and collect your driving training file in order at the waiting area; Carry and present your ID card for verification by the supervising officer; Mobile phones must be turned off upon entering the exam area; No loud talking is allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in your bag); After the exam, keep your ID card safe and submit the file to the "Certificate Submission Window" at the front of the exam room; Candidates who pass the exam should sign under the guidance of the staff at the exit before leaving the exam room; Candidates who fail the exam can leave the exam room and wait for notification from their driving school regarding the retake time.
11
0
Share

What to Do When the Windshield Fogs Up?

Solutions for a foggy windshield are as follows: 1. Open the windows for cross-ventilation. When the fogging is not severe, slightly open both side windows to allow outside air to circulate, reducing the temperature difference and eliminating the fog. 2. Press the windshield defogging button on the central control panel and adjust all air vents to face the windshield. Once the fog dissipates, you can turn off the AC button, reduce the fan speed slightly, and switch to warm air blowing towards the glass. 3. Evenly spray defogging agent onto a soft cloth and wipe the windshield, or spray it directly onto the glass.
4
5
Share

Why does the car not detect the one-button start key even though it has power?

One-button start key has power, but the car cannot detect it for the following reasons: 1. Signal interference around the vehicle: The presence of interference sources near the station can prevent the smart key from connecting with the vehicle. 2. Car battery failure: The vehicle's battery is dead, causing no response when starting the vehicle, and the battery needs to be recharged. 3. Control module failure: The remote connection control module of the car key malfunctions, preventing the key from sending the signal to start the vehicle. 4. Car key battery failure: If the car key battery fails, the sensor will not receive the signal when the key is close, and the vehicle can be started using the mechanical key.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.