What is the car with the 't' logo called?

What are the types of engine oil and their differences?

Automotive engine oils are divided into three types: conventional mineral oil, semi-synthetic oil, and full synthetic oil. The differences lie in performance, usage conditions, and price. Conventional Mineral Oil: Mineral oil is a commonly used lubricant in the market. It is derived from the distillation process of petroleum, where useful substances like gasoline and aviation fuel are separated, and the remaining base oil is further processed. Essentially, it utilizes the inferior components of crude oil. Mineral oil is inexpensive, but its lifespan and lubrication performance are inferior to synthetic oils, and it also causes significant environmental pollution. Additionally, due to the inability to completely remove impurities during the refining process, mineral oil has a higher pour point, making it unsuitable for use in low-temperature regions or extreme conditions. Semi-Synthetic Oil: Semi-synthetic oil is made from semi-synthetic base oil, which is a purified product of mineral oil through hydrocracking technology. It is a blend of mineral oil and full synthetic oil in a 4:6 ratio. The purity of semi-synthetic oil is very close to that of full synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product between mineral oil and synthetic oil. Full Synthetic Oil: Full synthetic oil is the highest-grade engine oil. It is derived from ethylene and propylene, which are dispersed from natural gas or crude oil, and then undergoes complex chemical reactions like polymerization and catalysis to form a lubricating fluid composed of large molecules. Essentially, it uses the superior components of crude oil, subjected to chemical reactions and controlled to achieve the desired molecular structure. Full synthetic oil molecules are neatly arranged, giving them strong resistance to external variables. As a result, it has excellent thermal stability, oxidation resistance, and viscosity stability, far surpassing mineral oil and semi-synthetic oil, but it also comes with the highest price.

18

5

Share

Does stalling a motorcycle at startup affect the engine?

Stalling a motorcycle at startup does affect the engine. However, it's fine as long as it doesn't happen frequently. Tips for beginners: Pull the clutch, engage first gear; Gradually release the clutch while slightly increasing throttle; When the bike starts moving, pause further clutch release for about 1 meter, then continue releasing the clutch or listen to the engine sound - wait until the engine sound becomes normal and unstressed before fully releasing the remaining clutch. Reasons for stalling: When the bike speed hasn't built up yet, if you start moving at half-clutch and suddenly pass the half-clutch point, it will stall. The solution is to hold the clutch steady at half-clutch position without further releasing - keep it steady and the motorcycle won't stall.

10

1

Share

How Often Should Engine Coating Be Done?

Generally, it is best to perform car coating once every six months. You can also choose based on the condition of your car. To extend the maintenance period, regular upkeep is essential. Coating not only maintains the brightness of the car but also provides excellent maintenance effects. Engine Coating: Engine coating involves thoroughly cleaning the engine compartment and then applying professional maintenance products. Coating Techniques: For new cars, you can directly spray protective agents onto the engine compartment and various parts, including wiring and pipelines. For older cars, first clean the engine compartment thoroughly, then use an air gun to dry it, and finally apply the coating. In fact, carefully cleaning the exterior surfaces of the engine, repainting parts that need it, and replacing worn-out components—essentially cleaning and polishing—can also achieve this effect.

18

0

Share

What Do the Left and Right Feet Control on a Motorcycle?

Left foot shifts gears, right foot brakes—this applies to most motorcycles. Left handlebar controls: In addition to the clutch, the high/low beam switch, turn signal switch, and horn are all operated with the left thumb. The clutch is operated with one finger (excluding the thumb), or two to three fingers depending on the clutch's resistance. Right handlebar controls: The throttle is controlled by gripping with the palm. The electric start switch and kill switch are operated with the right thumb. The front brake doesn't require much force, so it's controlled with the index and middle fingers. Some riders prefer using the middle and ring fingers—either way is fine.

2

Share

How Often Should Car Control Arms Be Replaced?

Car control arms generally do not need replacement unless there is impact deformation, cracks, or other special circumstances that necessitate replacement. Additionally, deformation, bushing aging, or noticeable jerking while driving should also prompt consideration for replacement. Introduction to Car Control Arms: They are part of the car's suspension system, and their main functions are: transmitting forces and torque between the wheels and the frame, buffering the impact from uneven road surfaces transmitted to the frame and body, dampening the resulting vibrations, and ensuring smooth driving. Symptoms of faulty control arms include: Clicking noises from the faulty side when driving on uneven roads; inconsistent steering feel, varying between light and heavy, making it difficult to control; severe cases may cause braking deviation; reduced vehicle shock absorption, lowering ride comfort; decreased vehicle stability; and reduced flexibility when turning.

12

3

Share

Are There People Who Fail the Subject One Test?

There are people who fail the Subject One test, possibly due to various factors leading to underperformance. Number of Attempts for Subject One Test: There are two chances in total. After submitting the answers, the score will be displayed. If the first attempt is unsuccessful, you can click to retake the test immediately. If the second attempt for Subject One also fails, you will need to reschedule the test and attend the Subject One examination again on the scheduled date. Introduction to Subject One: Subject One, also known as the Subject One theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is computer-based, consisting of 100 questions, with a passing score of 90 or above.

13

3

Share

What is the car with the 't' logo called?

What are the types of engine oil and their differences?

Does stalling a motorcycle at startup affect the engine?

How Often Should Engine Coating Be Done?

What Do the Left and Right Feet Control on a Motorcycle?

How Often Should Car Control Arms Be Replaced?

Are There People Who Fail the Subject One Test?

Can You Still Drive with Engine Valve Leakage?

How Long Does It Take to Check Vehicle Violations?

Is the Study Method Points Reduction Test for Subject One or Subject Four?

Can I make a left turn with 2 seconds of green light and 3 seconds of yellow light remaining?