What is the car brand with a bull logo?

1 Answers
Grady
07/30/25 3:04am
The car brand with a bull logo is Lamborghini, an Italian automotive brand. The dimensions of a Lamborghini are: length 4780mm, width 2030mm, height 1136mm, with a wheelbase of 2700mm. It has a fuel tank capacity of 90 liters and a trunk capacity of 140 liters. The curb weight is 1575kg. It features horizontal push-rod independent suspension at both front and rear. The Lamborghini is equipped with a 5.0L V12 engine delivering maximum horsepower of 700PS (515kW) and peak torque of 690Nm, paired with a 7-speed ISR transmission.
Was this review help?
1
5
Share
More Forum Discussions

How to Turn on the Heating in the 10th Generation Accord?

Here are the steps to turn on the heating in the 10th Generation Accord: 1. First, locate the air conditioning control area of the Accord, which is positioned in the center of the vehicle's dashboard. 2. The "A/C" button is the cooling switch for the air conditioning, while the "AUTO" button activates the automatic air conditioning function. Press the "AUTO" button and adjust the temperature to a higher setting to allow the vehicle to emit warm air. (The "SYNC" button controls the dual-zone temperature. The two knobs on either side are for adjusting the temperature up or down. The middle knob adjusts the air flow volume.) 3. The "MODE" button adjusts the direction of the air vents. 4. Finally, the "FRONT" button controls the front windshield defogging, and the "REAR" button controls the rear window heating.
17
4
Share

How to Drive to Get License Plates When the Temporary License Has Expired?

Here are the steps to re-register a vehicle with an expired temporary license: 1. First, you need to pay the vehicle purchase tax, select commercial insurance for the car, and undergo a criminal investigation inspection of the vehicle. Note that you must pay the vehicle and vessel tax before paying the purchase tax. Required documents include a copy of your ID card, a copy of the vehicle qualification certificate, the tax declaration form, and the tax invoice. 2. Go to the inspection station to complete the formalities: Non-exempt vehicles need to undergo an inspection, then pay the fees, fill out forms, take photos, submit documents, and collect the license plate application materials. 3. Take a number at the service hall and wait to process the relevant procedures. At this stage, you need to choose a license plate number. If you have already selected a number online, you must print out the online selection form. 4. Install the electronic license plate using the acceptance receipt, pay the road and bridge fees and processing fees at the payment hall, and collect the card at the road and bridge center. After collecting the card, use the acceptance receipt to pick up the license plate and documents at the service hall (usually takes about 1 business day).
19
0
Share

What does the eco light on the car dashboard mean?

The appearance of eco on the dashboard indicates that the vehicle's economy mode has been activated. Eco is an English abbreviation, derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). Eco mode is further divided into active eco driving mode and non-active eco driving mode. The difference lies in the fact that the active mode has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light will illuminate, and the vehicle will automatically begin adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button; when the dashboard eco indicator light comes on, it serves merely as a reminder function. The eco system will automatically assess your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most vehicles employ the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the eco mode. However, it is unnecessary to enable eco mode when driving at speeds exceeding 120 km/h, during idling, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of eco mode but could also impair the vehicle's power performance. Additionally, the eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the eco mode to automatically deactivate. During idling or when in N/P gear or manual mode, the eco mode may also become ineffective. When high torque output is required, such as during hill climbing, the engine control unit will prioritize ensuring sufficient power to drive the vehicle, and the eco mode will not function in such scenarios.
1
4
Share

What to Do When the One-Button Start of Zotye T600 Fails?

Solutions for the one-button start failure of Zotye T600 are as follows: 1. Steering wheel lock failure. The steering wheel lock is an anti-theft feature. When the steering wheel is locked, it cannot be turned, and the car cannot be started. If the start button fails due to the steering wheel being locked, you can turn the steering wheel left and right while pressing the one-button start button to release tension and unlock the steering wheel. 2. Smart key battery depletion causing failure. When the smart car key runs out of battery, the signal it emits is weaker, and the in-car sensor cannot receive the information, making the one-button start button unable to sense and ignite the engine. In this case, you can use the mechanical key inside the smart car key to insert into the keyhole and start the car.
18
0
Share

How long does the battery of a Mercedes car key last?

The battery life of a Mercedes remote car key is generally 2-3 years, depending on the frequency of use, making it difficult to determine the exact replacement time. Below are the steps for replacing the key battery: 1. Before replacement, it's best to first understand the battery model of your car key, which is usually specified in the vehicle's user manual. Then, select a new key battery according to the specified model. 2. Push the marked switch upwards from the tail of the key, and the hidden mechanical key will pop out slightly, allowing you to remove the mechanical key. Use the just-removed mechanical key to press against the marked position, apply a gentle force, and the key shell will open. After removing the key shell, you can see the battery positioned quite deep. Insert any object into the gaps on both sides, gently pry, and the old battery can be removed. 3. When installing the new battery, ensure the positive and negative poles are not reversed. Then proceed with the installation steps: first insert the top of the shell, then press firmly on the other end to complete the battery replacement. Finally, don't forget to reinsert the mechanical key.
11
2
Share

How to Replace the Key Battery for Ford Escort?

Steps to replace the Ford Escort key battery: Press the button on the remote key to release the key blade. Insert a flathead screwdriver to gently pry it open, then separate the parts to access and replace the battery. Below is an extended introduction to the Ford Escort: 1. In terms of passive safety features, the Escort offers a class-leading six-airbag protection system, including front airbags, side airbags, and side curtain airbags for both front and rear occupants, providing excellent collision protection. 2. The Escort's body structure incorporates a significant amount of high-strength steel, enhancing safety performance while reducing body weight, thereby improving fuel efficiency and economy.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.