What is the capacity of a car's fuel tank in liters?

2 Answers
PhoebeRose
08/30/25 5:01am
The capacity of a car's fuel tank varies depending on the vehicle model: 1. Mini and small cars range between 35 to 55 liters; 2. Compact and mid-size cars range between 55 to 70 liters; 3. Large full-size SUVs are around 100 liters. The fuel tank capacity refers to the maximum safe volume of the tank as announced by the manufacturer, with 'L' indicating the size of the tank capacity, which also determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. Fuel tanks can be divided into two types: open tanks and closed tanks, whose function is to store the working fluid required by the hydraulic system, as well as to dissipate heat, precipitate impurities, and separate air bubbles from the liquid.
Was this review help?
3
5
Share
GarrettLynn
09/12/25 2:12am
The size of a car's fuel tank isn't fixed. Having driven several models, I've noticed that compact cars usually have 40 to 60 liters—my Nissan Sylphy has a 45-liter tank, requiring frequent refueling. Mid-size SUVs like the Toyota RAV4 hold around 60 liters, offering better range. However, large off-road vehicles such as the Land Rover Range Rover can exceed 100 liters, though their heavier weight leads to higher fuel consumption. When designing fuel tanks, manufacturers must balance weight and safety, adhering to national standards to prevent accidents. Smaller tanks are more environmentally friendly, while larger ones suit long-distance travel. Before purchasing, check the owner's manual or specifications to match your needs and avoid wasting money on fuel.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

Where is the cabin air filter located in the Zhonghua Junjie?

The cabin air filter in the Zhonghua Junjie is located behind the glove compartment on the passenger side. The car's cabin air filter serves to separate solid impurities such as dust, pollen, and abrasive particles from the air. It also absorbs moisture, soot, ozone, odors, carbon oxides, SO2, and CO2, providing strong and long-lasting moisture absorption. The Zhonghua Junjie is positioned as a mid-size luxury sedan, with dimensions of 4650mm in length, 1800mm in width, and 1450mm in height, and a wheelbase of 2790mm. The design of the Zhonghua Junjie features the graceful and dynamic lines of the Apennine Peninsula. The front grille, similar to BMW, adopts a dual-kidney grille design, surrounded by thick chrome trim, with rounded headlights on both sides.
5
0
Share

How to open the front hood of an A4?

Method to open the front hood of an A4: Inside the main driver's compartment, the owner can locate a pull handle resembling a latch near where the left foot normally rests while driving. Apply appropriate force to pull it, at which point you'll hear a popping sound from the front of the hood. Then proceed to the front of the vehicle, lift the hood with your left hand while using your right hand to pull outward on the exposed T-shaped handle that has popped up - this will fully open the hood. The Audi A4 is a popular B-segment model manufactured by FAW-Volkswagen, with dimensions of 4763mm in length, 1826mm in width, 1426mm in height, and a wheelbase of 2903mm.
11
1
Share

What does the N gear in a motor vehicle mean?

The N gear in a motor vehicle refers to the neutral position in an automatic transmission. When the vehicle is stopped for an extended period, it is advisable to shift into the N gear. To prevent the vehicle from rolling on a slope, always apply the brakes. The N gear is one of the standard gears in automatic transmission vehicles, located between the R (reverse) and D (drive) gears on the gear shift console. Essentially, it acts as the neutral gear in the transmission, designed to disconnect the power transmission between the input and output shafts inside the gearbox. When the driver moves the gear lever to the N position, the power input and output ends within the automatic transmission are fundamentally separated. This allows the engine's rotating mechanism and the transmission system connected to the output shaft to operate independently without affecting each other. As a result, there is no need to turn off the engine while waiting at traffic lights.
5
4
Share

What is the function of a car sway bar?

The function of a car sway bar: To achieve handling balance and limit body roll during cornering, thereby improving tire contact with the ground. When a car takes a high-speed turn or travels on uneven roads, it tends to twist slightly and is highly prone to tilting, which can lead to vehicle rollover. A car sway bar refers to the front strut tower bar. During high-speed emergency turns or evasive maneuvers, the springs of the suspension system operate independently, and the material and physical properties of each spring are mostly inconsistent. As a result, the remaining vibrations are ultimately absorbed by the vehicle body, causing uneven stress on one side of the body, making it highly susceptible to roll and rollover.
15
3
Share

How to Repair a Torn Leather Car Seat?

The methods for repairing a torn leather car seat are: 1. For small cracks, apply acrylic resin to the crack, align the edges, and dry with a blow dryer; 2. For larger tears, take a piece of non-woven fabric slightly larger than the tear, place a layer of cotton cloth over the tear, press and shape with an iron, remove the padding once the leather surface is smooth, and dry with a blow dryer; 3. Take a thin and soft silk or cotton strip and place it under the tear. Currently, car seats are mainly divided into two types: genuine leather seats and fabric seats, with additional options like child seats and racing seats. For car seat maintenance, use strongly alkaline cleaning agents such as soapy water, avoid random chemical cleaners, dry with a soft tissue after cleaning, and prevent sharp objects from scratching the leather.
11
0
Share

What grade of fuel is diesel?

Diesel is a fuel graded as 90, 93, or 97. It is a light petroleum product and a complex mixture of hydrocarbons, serving as the fuel for diesel engines. Diesel is primarily produced by blending diesel fractions obtained through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be derived from shale oil processing and coal liquefaction. Diesel is categorized into light diesel and heavy diesel, widely used in large vehicles, railway locomotives, and ships. Precautions for using diesel include: 1. It is strictly prohibited to mix diesel with gasoline for lighting or as fuel for kerosene stoves; 2. Diesel must undergo sedimentation and filtration to remove impurities before use to ensure the proper functioning of the diesel engine fuel supply system.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.