What is the C category for driving tests for small cars?

1 Answers
VanClayton
07/29/25 11:06pm
There are two types of small car licenses: C1 and C2. Among them, C1 is a manual transmission driving license, which allows driving small and micro passenger cars, light and micro cargo trucks, as well as light and micro special-purpose vehicles; it also permits driving vehicles under the C2, C3, and C4 categories. On the other hand, C2 is an automatic transmission driving license, which allows driving small and micro automatic transmission passenger cars and light and micro automatic transmission cargo trucks. Below is the application process for small car driving licenses C1/C2: 1. Bring the original and a copy of your ID card to the driving school registration point to register and wait for the arrangement of theoretical study time (non-local students need a temporary residence permit, which the driving school can help process); 2. Undergo a medical examination, including ECG, blood pressure, height, weight, hearing, grip strength, back strength, vision, and color vision, all of which must pass; 3. Take the tests (all four subjects must be passed). 4. Collect the driving license by presenting your ID card at the registration point to receive the driving license.
Was this review help?
20
0
Share
More Forum Discussions

How to Disassemble the Volkswagen Tiguan Key?

The car owner first needs to pull out the mechanical key from the car key. Then, an opening mark can be seen at the bottom of the key. Use a small screwdriver to align with the opening mark at the bottom and rotate it 90 degrees. Subsequently, turn the outer shell of the key to complete the disassembly.
13
2
Share

Why Does the Car Move Without Pressing the Accelerator?

The reasons why a car moves without pressing the accelerator are: manual transmission cars have an idle phase, where they can move at idle speed without pressing the accelerator or the brake; because automatic transmissions do not have a clutch, once the gear is engaged in drive, the car will move even without pressing the accelerator, at a speed of about 15km/h. Driving precautions: 1. Check the vehicle: Before setting off each day, conduct a comprehensive check of the vehicle, including checking for oil or water leaks, inspecting the ground under the car for any oil or water stains, measuring tire pressure to ensure it is appropriate, and checking the engine oil condition. 2. Refuel promptly: Before a long journey, fill up the fuel tank. When the fuel level drops below half during the trip, refuel at a major gas station along the way. Do not wait for the fuel light to come on before looking for a gas station, as this can be very passive. 3. Avoid fatigued driving: For long-distance driving, the primary concern should be to avoid fatigued driving. Fatigued driving is one of the main causes of accidents. If there is a co-driver, it is best to switch every 2 hours. If feeling drowsy, it is advisable to stop and rest for a while, and never force yourself to continue driving.
16
1
Share

Can military personnel obtain a C1 driver's license?

The military cannot obtain a C1 driver's license; they can only obtain a military Class B license. Personnel who obtain a driver's license in the military must exchange it for a civilian driver's license after discharge. They only need to pass a theoretical exam to receive a B2 license. In addition to driving vehicles permitted by a Class C license, a B2 license also allows the holder to drive heavy, medium-duty trucks or large, heavy, and medium-sized specialized operation vehicles. Requirements for upgrading from a C1 to a B2 driver's license: Age between 20 and 60 years old; height not less than 155cm; holding a C1 license for at least 1 year; no record of accumulating 12 penalty points in the current and the previous scoring cycle before application; visual acuity must meet or exceed 5.0 on the logarithmic visual acuity chart; no record of drunk driving or being primarily responsible for a fatal traffic accident while holding a C1 license. Specific process for applying for a B2 driver's license: Apply to the vehicle management office for upgrading to a B2 license; fill out the application form, submit ID and medical examination form, and provide the original copy of the current motor vehicle driver's license; attend the theoretical and practical exams as scheduled; the new license will be issued by the applying vehicle management office within 7 working days after passing the exams.
18
4
Share

What Are the Charging Requirements for New Energy Vehicles?

New energy vehicle charging requirements are as follows: When purchasing a pure electric vehicle, the seller will provide a portable home charging cable that can be plugged directly into a 220V household socket for charging. However, this charger does not support fast charging and can only be used in slow charging mode, typically taking around 8 hours to fully charge. Currently, most pure electric vehicle owners use their cars during the day and charge them at home overnight. Charging precautions for pure electric vehicles: 1. Charge correctly to avoid over-discharging or overusing. Although slow charging takes longer, it is safer and provides better protection for the battery. 2. Follow standard charging procedures. Each time you charge, inspect the charging cable and lines to prevent safety incidents, and always charge according to standard procedures. 3. Power off before unplugging the charging cable. When charging is nearly complete, first turn off the power before removing the charging cable. This helps avoid potential electric leakage and unnecessary harm. 4. Charge in a suitable environment. Charging should be done in a well-ventilated area, as a good charging environment is highly beneficial for the vehicle.
13
0
Share

What is the speed limit for entering a highway ramp?

On highways, the maximum speed on ramps must not exceed 120 kilometers per hour, and the minimum speed must not be lower than 60 kilometers per hour. Precautions for driving on highway ramps: Pay attention to road signs along the way. On highways, be sure to notice the road signs set up in advance near ramp entrances. Avoid 'digging a well when thirsty'—do not stop to check directions only when you reach the ramp entrance. If you miss the exit, continue forward. If you are too close to or have already passed the ramp entrance, do not brake suddenly or reverse, as vehicles behind you may be traveling at high speeds and unable to avoid a collision, leading to a rear-end accident. Use the 'auxiliary lane' when entering or exiting ramps. Since most ramps have a speed limit of 60 kilometers per hour, highways are equipped with an 'auxiliary lane'—either a deceleration or acceleration lane—alongside the main lanes to allow for safe speed adjustments. These lanes are separated from the main lanes by short, thick, and highly visible white markings. Things to note when exiting a ramp: When exiting a highway, change to the right lane in a timely manner. About 500 meters before the exit, turn on the right turn signal, adjust your speed appropriately, and smoothly enter the deceleration lane. On the ramp, be mindful of merging vehicles from other lanes, yield appropriately, and avoid competing for the right of way.
5
0
Share

What car has a logo with two Rs?

The car logo with two Rs is Rolls-Royce. Additional information: 1. Rolls-Royce is an ultra-luxury automobile manufacturer founded in 1906 in the UK by Frederick Henry Royce and Charles Stewart Rolls. Rolls-Royce vehicles are outstanding representatives of top-tier automobiles, renowned worldwide for their luxury, and are one of the primary representatives of European and American automobiles. 2. Besides manufacturing cars, Rolls-Royce is also involved in aircraft engine manufacturing and is an excellent engine manufacturer. Some Airbus aircraft models use Rolls-Royce engines. In 2003, Rolls-Royce Motor Cars was acquired by BMW.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.