What is the button on the Camry gear lever?

1 Answers
RuthRose
07/29/25 8:21pm
The black button next to the P gear on the GAC Toyota Camry is the auto-hold button. When the auto-hold function is activated, the driver does not need to pull up the handbrake when the vehicle is parked. The following is relevant information about the Camry: 1. Versions: The new Camry has three powertrain versions: 2.0L, 2.5L, and hybrid. Although the 2.0L engine is not as impressive as the 2.5L and hybrid versions in this generation of the Camry, it is still not weak and can fully meet daily driving needs. The 2.5L and hybrid engines are among the biggest highlights of the eighth-generation Camry. The 2.5L engine was nominated for the 2018 World's Top 10 Engines, while the hybrid engine was ultimately rated as one of the World's Top 10 Engines, highlighting the advantages of these two engines. 2. Power and fuel consumption: The 2.5L engine has a thermal efficiency of 40%, paired with an 8AT transmission, delivering stronger power and lower fuel consumption. As for the hybrid engine, it has a thermal efficiency of 41%, excellent fuel consumption, and better performance than the 2.5L engine.
Was this review help?
17
1
Share
More Forum Discussions

Is the Festa equipped with a dry dual-clutch transmission?

The Festa is equipped with a dry dual-clutch transmission. The method to distinguish between dry and wet dual-clutch transmissions is to check whether the friction plates of the dual-clutch contain lubricating oil. Taking the 2021 Festa as an example, it belongs to the compact car category, with body dimensions of: length 4660mm, width 1790mm, height 1425mm, wheelbase of 2700mm, fuel tank capacity of 53l, trunk capacity of 475l, and curb weight of 1365kg. The 2021 Festa is powered by a 1.6T turbocharged engine, delivering a maximum horsepower of 204PS, maximum power of 150kW, maximum torque of 265Nm, and is paired with a 7-speed dual-clutch transmission.
17
3
Share

What is the fuel tank capacity of the Toyota Sienna?

The fuel tank capacity of the Toyota Sienna is 75 liters. The Toyota Sienna is a mid-to-large-sized MPV under the Toyota Group. Taking the 2011 two-wheel-drive automatic Toyota Sienna as an example, its body dimensions are: length 5085mm, width 1983mm, height 1811mm, with a wheelbase of 3030mm. The 2011 two-wheel-drive automatic Toyota Sienna features a front suspension with MacPherson independent suspension and a stabilizer bar, and a rear suspension with a torsion beam non-independent suspension. It is equipped with a 2.7L naturally aspirated engine, delivering a maximum horsepower of 190PS, a maximum power of 139kW, and a maximum torque of 253Nm.
1
2
Share

What is the method for cleaning the engine radiator?

Cleaning the engine radiator involves the following steps: 1. Remove the bumper; 2. Adjust the water gun nozzle to a spray pattern and set the pressure to an appropriate level, then spray towards the dirty radiator; 3. Add the car radiator cleaner into the radiator filler port, let it soak for thirty minutes, then drain the cleaner and rinse the radiator and pipes thoroughly with water. The function of the engine radiator is: when the engine's water temperature is high, the water pump circulates repeatedly to lower the engine's temperature, thereby protecting the engine. In winter, when the water temperature is low, the water circulation stops to prevent the engine temperature from dropping.
3
5
Share

What is the emission standard of the Toyota Prado?

Toyota Prado meets the China V emission standard. It is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280ps, maximum power of 206kw, and maximum torque of 365nm. It is paired with a 6-speed automatic transmission. The front suspension is a double-wishbone independent suspension, and the rear suspension is a four-link non-independent suspension. The Toyota Prado is a 5-door, 7-seat mid-to-large SUV with body dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, a wheelbase of 2790mm, a fuel tank capacity of 87L, a trunk capacity of 523L, and a curb weight of 2285kg.
15
2
Share

What is the function of the engine lubrication system?

The functions of the engine lubrication system are: 1. Lubricate the surfaces of moving parts to reduce wear and engine power consumption; 2. Clean friction surfaces, removing metal shavings and foreign particles; 3. Dissipate heat generated by friction; 4. Enhance sealing between moving parts to prevent gas or oil leakage; 5. Protect part surfaces from corrosion and rust; 6. Serve as hydraulic fluid; 7. Form an oil film on moving part surfaces to absorb shocks and reduce vibrations. The engine lubrication system consists of an oil supply device, filtration device, and instrument signal device. Its working principle is: the main oil pump draws lubricating oil from the oil pan, pumps it into the oil cooler, and the cooled lubricating oil passes through the oil filter before entering the main oil pipe at the lower part of the engine block, where it is delivered under pressure to various lubrication points.
17
0
Share

Can the Engine Start-Stop Be Turned Off?

Engine start-stop can be turned off by pressing the automatic start-stop switch located on the center console. The functions of the automatic start-stop system are: 1. The engine can automatically shut off to reduce fuel consumption and emissions; 2. After the engine shuts off, the power supply can replace the belt pulley to provide operating power for the engine cooling fan and the car's air conditioning. Precautions for the automatic start-stop system include: 1. Quickly shift to P gear and release the brake when the engine stops; 2. Reduce current consumption; 3. Do not repeatedly press the brake when the engine is off; 4. Let the engine speed drop to zero, engage the starter gear, and then restart; 5. Do not activate the automatic start-stop system during low-speed parking or when the air conditioning is on.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.