What is the button on the automatic transmission shifter?

What are the differences between Octavia and Sagitar?

The differences between Octavia and Sagitar are as follows: 1. Exterior: The new Sagitar has not undergone many changes, with only different styles of front grilles being equipped depending on the model. In terms of configuration, the second-generation MIB infotainment system with a 6.5-inch screen, rear parking radar, leather multifunction steering wheel, keyless entry and one-button start system, and rear door ambient lighting are standard on all models except the Fashion version. 2. Powertrain: While retaining the original 1.6L and 1.4T engines, the new Sagitar has added a small-displacement model—the Sagitar 1.2TSI Automatic Leading Edition, equipped with Volkswagen's EA211 series 1.2TSI four-cylinder turbocharged engine, delivering a maximum power of 110 horsepower and a peak torque of 200 N·m. It is paired with a 7-speed DSG dual-clutch transmission. The new Octavia and Octavia Combi will be equipped with three engines: 1.6L, 1.2T, and 1.4T, with maximum power outputs of 110 horsepower, 116 horsepower, and 150 horsepower, respectively. The 1.6L model is matched with a 5-speed manual transmission, while the 1.2T and 1.4T engines are paired with a 7-speed dual-clutch transmission.

19

3

Share

Do small cars require annual inspections after 6 years?

Whether a small car requires an annual inspection after 6 years depends on the specific situation: Small and micro non-commercial passenger vehicles are exempt from inspection for the first 6 years. After 6 years but less than 10 years, they require inspection every two years; after 10 years but less than 15 years, they require an annual inspection; after 15 years, they require inspection every 6 months. Commercial passenger vehicles require an annual inspection within the first 5 years; after 5 years, they require inspection every 6 months. Inspection requirements for other vehicles: Trucks and large or medium non-commercial passenger vehicles require an annual inspection within the first 10 years; after 10 years, they require inspection every 6 months. Imported vehicles, like other vehicle types, can undergo regular inspections at any testing facility. Important notes about vehicle inspections: Vehicles that fail the inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further operation. Vehicles that do not undergo inspection without valid reasons or fail the inspection are not allowed to operate on the road or transfer ownership. Vehicles that meet the criteria for scrapping or exceed the prescribed usage period will not be inspected, and their license plates and registration records will be revoked, leading to scrapping.

16

4

Share

How to Quickly Charge a Car Battery?

You can use a portable charger to charge the battery. Generally, it takes about 20 hours to charge a car starter battery. After charging, perform a battery test to check if it has been charged. A fully charged 12V battery typically has an open-circuit voltage of around 13.0V. If the voltage meets the requirement, proceed to test the capacity or attempt to start the engine. If it works, the battery is normal; if not, the battery may need replacement. Below is relevant information about car battery charging: 1. During charging, connect the battery positive terminal to the power source positive and the battery negative terminal to the power source negative. 2. The initial charging process is divided into two stages: First, use the initial charging current until the electrolyte releases bubbles and the single-cell voltage rises to 2.3—2.4V. Then, reduce the current to half of the initial charging current and continue charging until the electrolyte releases intense bubbles, and both the characteristics and voltage remain stable for 3 hours. The total charging time is approximately 45—65 hours. The temperature should be controlled between 35—40°C. If the electrolyte specific gravity does not meet the standard after initial charging, adjust it using distilled water or an electrolyte with a specific gravity of 1.4. 3. During the charging process, frequently measure the electrolyte temperature. Use methods such as halving the current, stopping charging, or cooling to keep the temperature between 35—40°C. If the electrolyte specific gravity does not meet the standard after initial charging, adjust it using distilled water or an electrolyte with a specific gravity of 1.4. After adjustment, continue charging for 2 hours until the specific gravity meets the standard.

10

3

Share

What are the steps for adjusting the torsion bar on a Peugeot 206?

The steps for adjusting the torsion bar on a Peugeot 206 are as follows: 1. There are two adjustment screws, one on the left and one on the right, in front of the fuel tank under the chassis. 2. Tightening the screws clockwise increases the torsion force and simultaneously raises the front of the vehicle, increasing the ground clearance. 3. If the adjustment screws have reached their limit, remove the adjustment arm and re-adjust by advancing one tooth. Below is a tutorial on the installation and adjustment of the torsion bar: (1) Lift the vehicle, preferably using a support to hold the front cross member, making it easier to raise the trailing arms and remove the shocks on both sides. (2) Remove the rear shock and one of the fixed screws on the small trailing arm of the stabilizer bar, then remove the torsion bar's fixed screw and eccentric washer. (3) Next, knock out the torsion bars on both sides, then use a support to raise the trailing arms to the desired height. (4) Insert the new torsion bar, find the optimal meshing position, and fully insert it. Remove the support and measure the data. A deviation of 1-2 mm in the up and down swing is normal; if the deviation is too large, re-measure and reposition to find the correct meshing position. (5) Once both sides are aligned, secure the torsion bar with screws and eccentric washers, applying a torque of 25-30. (6) Install the shocks: torque the lower part to 140 and the upper part to 80, then reinstall the removed fixed screw on the small trailing arm of the stabilizer bar.

19

4

Share

What does the break-in period of a car mean?

The break-in period of a car refers to the initial driving period after a new car leaves the factory, during which the engine components wear in smoothly. The first maintenance cycle for a car is usually around 5,000 kilometers. Precautions during the car's break-in period include: 1. Maintain smooth starts, avoid sudden acceleration, and do not let the engine RPM get too high; 2. Before starting, ensure the coolant temperature reaches at least 50 degrees Celsius, start in low gear, and shift to high gear after 1 kilometer; 3. Shift gears promptly while driving, avoid prolonged use of a single gear, and do not use high gear at low speeds or low gear at high speeds; 4. Choose good road conditions to avoid excessive vibration or impact, and disengage the clutch before braking; 5. Use high-quality fuel and engine oil, and avoid using engine wear-resistant additives.

15

5

Share

Do You Need to Release the Throttle When Shifting Gears in a Manual Transmission Car?

Manual transmission cars require releasing the throttle when shifting gears. In any upshift scenario, you must release the throttle, as failing to do so will cause a noticeable jerk in the vehicle. Speed reference: First gear corresponds to speeds of 0-5 km/h, second gear to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. Shifting timing: For most cars, the optimal shift point occurs at an engine speed of 2000 rpm, not exceeding 2500 rpm. For high-displacement, high-power engines, shifting can occur around 3000 rpm.

14

3

Share

What is the button on the automatic transmission shifter?

What are the differences between Octavia and Sagitar?

Do small cars require annual inspections after 6 years?

How to Quickly Charge a Car Battery?

What are the steps for adjusting the torsion bar on a Peugeot 206?

What does the break-in period of a car mean?

Do You Need to Release the Throttle When Shifting Gears in a Manual Transmission Car?

Should You Pause in Neutral When Shifting Gears in a Manual Transmission?

Is it necessary to have an annual inspection for a car after six years?

What are the requirements for applying for a Class B driver's license?

What is the difference between 3-cylinder and 4-cylinder engines in cars?