···
Log in / Register

What is the bulb model of the Baojun 360?

4 Answers
StSerenity
07/29/25 7:53pm

The bulb model of the Baojun 360 is 9005, which is a combined high and low beam. The Baojun 360 is a 6-seater family car under SAIC-GM-Wuling, with a body length, width, and height of 4615mm, 1735mm, and 1660mm respectively, and a wheelbase of 2750mm. The Baojun 360 features a highly original exterior design with sharp and prominent body lines, presenting a dignified yet youthful appearance that meets users' diverse daily driving scenarios. Its front face adopts a new hexagonal grille design, paired with eagle-eye headlights. The side profile features a waistline that runs through the front and rear light groups, complemented by lower creases that echo the rear design. Together with the streamlined roof and spoiler, it creates a floating roof style.

Was this review help?
1
0
Share
HeidiDella
08/14/25 3:37pm

I just replaced the headlight bulb of my Baojun 360. The model is usually H7 or H4, depending on the year and configuration of your car. For example, the 2018 model mostly uses H7, while newer ones may have switched to LED. It's quite simple to do it yourself. You need to open the hood, locate the headlight assembly, gently unscrew the fixing screws, unplug the old bulb, and then install the new one. Remember not to touch the glass part of the bulb, as the oil from your hands can cause it to burst prematurely. The bulbs are not expensive, just a few dozen yuan each online. It's recommended to buy original or high-quality brands, otherwise, the lifespan will be short and the lighting brightness will be affected. Regularly check the lights to avoid dangerous night driving. If you're unsure about the model, check the owner's manual or take a photo of the headlight part number and go to the store to match it, which is better than guessing blindly.

Was this review help?
17
1
Share
Expand All
DeLogan
10/15/25 8:01am

Common issues with the Baojun 360 bulbs during repairs mainly involve the H7 halogen headlights. However, there may be variations across different model years, and higher trim levels may use LEDs. Before replacing, don't rush—first check if the fuse is blown or if there's any loose wiring causing poor contact. Many bulb failures I've encountered stem from voltage instability, so regular checks on the battery and alternator are crucial. Don't mix up bulb models; H7 and H4 differ in size, and incorrect installation can cause a short circuit. After replacement, test the headlight beam height to ensure it meets standards and doesn't blind oncoming traffic. For cost savings, aftermarket parts from auto parts markets are an option, but prioritize certified products for longer lifespan. It's recommended to inspect every two years to prevent sudden failure incidents.

Was this review help?
10
5
Share
Expand All
StLydia
11/29/25 2:04am

As a Baojun 360 owner, most of the headlight bulb models are H7. I've changed them a few times, and it's not difficult. When purchasing, choose bulbs from reputable stores—don’t go for cheap ones to avoid poor performance. A broken bulb not only affects driving but may also lead to a traffic ticket. During routine maintenance, remember to wipe off dust from the lens to reduce aging risks. After replacing the bulb, adjust the beam alignment to ensure a safe field of view. If the model is unclear, check the manual or consult the 4S store’s after-sales service—they can quickly match the right one. Overall, it doesn’t cost much and can be done in just over ten minutes.

Was this review help?
7
0
Share
Expand All
More Forum Discussions

Where is the cabin air filter located in the C200L?

C200L cabin air filter is located under the glove compartment on the passenger side. Here is relevant information: 1. Some models are equipped with two cabin air filters, with the other one located in the engine compartment. 2. For Mercedes-Benz C200L, the cabin air filter should typically be replaced every 20,000 kilometers, though this interval can be adjusted based on actual conditions. If the vehicle is frequently driven on dusty roads, more dust will enter the cabin, causing the air conditioning system to become excessively dirty. Additionally, some users prefer parking under trees or temporarily stopping near trees, allowing tree fruits to fall onto the air intake of the cabin air filter, which can also lead to severe contamination requiring earlier replacement. Furthermore, the frequency of air conditioning use varies by season, which may also have some impact.
17
3
Share

What is the tire specification for the Excelle?

The Excelle 1.6LX series and 1.6LE series differ in wheel rims. The former has a tire specification of 185/65R14, while the latter is 195/55R15. Below is relevant information: 1. The tire specification model size is expressed in millimeters for the section width and the percentage of the aspect ratio. This is followed by: tire type code, rim diameter (in inches), load index (permissible load-bearing mass code), and permissible vehicle speed code. For example, a tire specification could be 195/55/R1685V. 2. Tires are circular elastic rubber products assembled on various vehicles or machinery for rolling contact with the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance.
20
5
Share

Do You Need to Press the Brake When Shifting from S to D Mode?

When shifting from S to D mode, you do not need to press the brake; you can shift directly. Generally, when switching between S and D modes, it is recommended to ease off the accelerator slightly to avoid affecting the engine's normal operation. S mode essentially delays the shifting timing, allowing the engine to maintain a high RPM state for a longer period. D mode is the drive gear, so when in D mode, the driver only needs to control the accelerator and brake pedals properly without manually switching gears. You can directly shift from D to S mode. S and D modes can be considered as one gear because both use the same mechanical mechanism, only differing in the shifting logic sequence. To enhance the engine's responsiveness, the engine speed is increased by either pre-shifting or delaying upshifts, thereby improving the car's acceleration response. Therefore, switching between D and S modes can be done freely.
1
5
Share

Where is the BMW anti-skid switch located?

BMW anti-skid switch is generally located next to the gear lever, with an icon of a car + curved line + OFF, which is the ESP anti-skid switch. Here is some relevant information: 1. ESP is a built-in function of the vehicle system and does not require the driver to activate it manually. It mainly ensures the stability of the vehicle body under special driving conditions, reduces the output torque, and effectively prevents the risk of skidding and fishtailing. 2. When the vehicle experiences a loss of control such as fishtailing or skidding, the ESP electronic stability system will intervene in time and correct the vehicle's driving trajectory. At this time, the ESP indicator light on the instrument panel will illuminate, indicating that the ESP system is working. ESP is also an important system in the vehicle's active safety system.
12
4
Share

What is the engine model of Borgward?

Taking the Borgward BX5 as an example, its engine model is BWE418A, which is a 1.8L turbocharged engine equipped with technologies such as variable intake manifold, direct fuel injection, and dual VVT. The Borgward BX5 is built based on the European ENCAP 5-star safety standard, with body dimensions of 4483mm in length, 1876mm in width, and 1677mm in height, and a wheelbase of 2685mm. In terms of appearance, the Borgward BX5 follows the family design style of Borgward, featuring a youthful and handsome front face. The rear of the vehicle is very full, with exquisite tail lights on both sides, and the black lower trim gives the entire rear of the vehicle a strong sense of sportiness.
6
4
Share

What do the three locks of the Big G mean?

The three locks of the Big G refer to the central differential lock, front axle differential lock, and rear axle differential lock. The specific details are as follows: 1. When the car is driving in full-time four-wheel drive mode, activating the central differential lock is suitable for roads with gravel or slight bumps and slopes, as well as sections where single-wheel slippage is likely to occur in the front or rear wheels. The rear axle differential lock is also suitable for roads with many rocks or severe bumps. When the rear axle differential lock is engaged, the rear wheels still maintain traction. 2. After activating the front axle differential lock, all wheels on the car have the same traction, making it more suitable for extremely harsh road conditions or situations where all wheels on the same side lose traction. This mode is ideal for desert driving or snow escape.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.