What is the bulb model for Wuling Hongguang headlights?

1 Answers
DelAbel
07/29/25 3:47pm
The low beam uses H1 bulbs, and the high beam uses H7 bulbs. Here are the specific details: 1. Car headlights: Car headlights are a crucial component. After prolonged use, you may notice that the light emitted becomes dim and yellowish, with reduced brightness, especially noticeable in halogen headlights. There are two main reasons for the decrease in brightness: first, external factors like sand, gravel, and other debris leave scratches and dust on the lens; second, the heat generated by the bulb during operation causes the plastic lens to age and turn yellow. 2. Lens: The headlight lens is made from polycarbonate or polymethyl methacrylate plastic. Whether it's halogen, xenon, or LED lights, all generate significant heat when illuminated. This heat accelerates the aging of the plastic, causing the lens to lose clarity and transparency, leading to dim and yellowish lighting, which directly affects illumination performance.
Was this review help?
4
5
Share
More Forum Discussions

What Does the Number of Cylinders in a Car Mean?

What Does the Number of Cylinders in a Car Mean? The number of cylinders in a car refers to the number of cylinders in the engine. Here is some information about cylinders: 1. A cylinder is a cylindrical chamber in the engine where a piston is driven by the pressure or expansion force of the working fluid. 2. For the same displacement, more valves generally result in better intake and exhaust efficiency. 3. Traditional engines typically have one intake valve and one exhaust valve per cylinder, which lowers manufacturing costs and makes maintenance relatively easier. Engines with larger displacement and higher power often use multi-valve technology. A simple multi-valve configuration is the three-valve structure, which adds an additional intake valve to the standard two-valve (one intake, one exhaust) setup.
1
5
Share

Does Water in the Fuel Tank Affect the Engine?

The impact of water in the fuel tank on the engine is as follows: 1. Water in the car's fuel tank can cause frequent stalling. Due to the presence of water, the tank may rust, corrode, or age. If there is moisture in the fuel system, it can lead to reduced engine power, increased fuel consumption, vehicle shaking, and difficulty starting in winter. Symptoms of water in the fuel tank include difficulty starting, engine backfiring, high idle speed, or insufficient power. 2. If water accidentally enters the fuel tank, the owner should stay calm, analyze the cause and extent of the water ingress. If the situation is mild, it can be resolved independently; if severe, professional repair at a specialized auto shop is recommended for better assurance. Since the fuel tank is the source of the car's power, any issues with it can make the vehicle difficult to operate.
17
5
Share

What to Do When the Brake Booster System Fails?

Here are the solutions for when the brake booster system fails: A restricted brake booster system refers to the failure of the brake booster system. The causes and solutions involve checking whether there is any air leakage in the vacuum pump or pipelines, and also inspecting whether the vacuum pressure sensor is malfunctioning. If a fault is detected, timely repairs are necessary to prevent accidents. Additional Information: The brake booster pump operates on the principle of the engine drawing in air during operation, creating a vacuum on one side of the booster. This creates a pressure difference compared to the normal air pressure on the other side, which is used to enhance braking thrust. Even if there is only a slight pressure difference across the diaphragm, due to the large surface area of the diaphragm, it can still generate significant thrust to push the diaphragm toward the side with lower pressure.
12
3
Share

What is the tire pressure for a 1.2t Corolla?

1.2t Corolla's normal tire pressure range is between 2.3~2.5 bar. Additional information is as follows: In winter, the tire pressure can be appropriately increased by about 0.2 bar based on the standard tire pressure. In summer, the tire pressure can be slightly lower than the standard by about 0.1 bar to avoid overinflation and potential blowouts due to high temperatures. Load conditions: When the vehicle is unloaded, use the lower limit of the standard tire pressure. When fully loaded, use the upper limit of the standard tire pressure. Tire pressure measurement environment: There is a difference between cold and hot tire pressures, with a difference of about 0.2 bar. If measuring hot tire pressure, subtract approximately 0.2 bar to get the cold inflation pressure. Road conditions: On rough roads, the tire pressure can be appropriately reduced by 0.1-0.2 bar from the standard. Tire condition: For new tires, increase the pressure by about 0.2 bar from the standard. For old tires, reduce the pressure appropriately, and for severely worn tires, use the lower limit of the standard. For comfort tires (soft tires), increase the pressure by about 0.2 bar from the standard. For performance tires (hard tires), use the lower limit of the standard. Spare tire pressure: Since spare tires are not frequently used, maintain a higher pressure (above 2.5 bar) to ensure readiness, adjusting to the appropriate pressure when in use, then reinflating to 2.5-3.0 bar.
19
3
Share

Where is the Bora's fuse box located?

The Bora's fuse box is located inside the instrument panel and the cabin of the vehicle. If any electrical equipment stops working during the use of the car, it may be due to a blown fuse. The fuse box is responsible for transmitting driving information to various parts of the vehicle body and is a key component in the car's electronic control system. Relevant information is introduced as follows: The Bora is a compact sedan under the Volkswagen brand, powered by the EA111 series 1.4TSI turbocharged engine. In terms of body dimensions, the Bora measures 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. It is a four-door, five-seater sedan.
3
0
Share

What is the ground clearance of the latest 2017 Jetta model?

2017 Jetta latest model has a minimum ground clearance of 120mm. Relevant information about ground clearance is introduced as follows: Ground clearance (i.e., minimum ground clearance) refers to the minimum height between the car's chassis and the ground when the car is at its maximum load capacity. The minimum ground clearance reflects the car's ability to pass over obstacles or uneven ground without collision. Relevant information about the 2017 Jetta is introduced as follows: 1. After the redesign, the Jetta's appearance has become much younger compared to the older models. The front grille has been adorned with two chrome strips, adding a touch of fashion. Moving to the rear, the design emphasizes a stable and steady feel, lacking some vitality compared to the front. The front face adopts an X-shaped design, which, despite its simple lines, brings a fashionable vibe. The rear design mainly focuses on a stable and steady feel, lacking some vitality. 2. In terms of interior, the Jetta still uses a dark upper and light lower color scheme, creating a homely atmosphere, while the addition of silver decorative strips brings a fashionable touch to the cabin. The three-spoke steering wheel highlights a sporty feel, and the center console is equipped with a multimedia entertainment system and air conditioning system. Additionally, all models come standard with ABS anti-lock braking, brake force distribution (EBD/CBC, etc.), and engine electronic anti-theft system. 3. For the powertrain, the Jetta uses the well-known EA211 engine, offering consumers a choice of 1.4L and 1.6L naturally aspirated engines, as well as a 1.4T turbocharged engine. The 1.4L naturally aspirated engine delivers a maximum power of 66kW (90Ps) and a maximum torque of 132Nm; the 1.6L naturally aspirated engine delivers a maximum power of 81kW (110Ps) and a maximum torque of 160Nm; while the 1.4L turbocharged engine delivers a maximum power of 96kW (131Ps) and a maximum torque of 225Nm. Transmission options include a 7-speed dual-clutch, 5-speed manual, and 6-speed automatic transmission for consumers to choose from.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.