What is the bulb model for the Tiguan L headlights?

1 Answers
LeAvery
07/30/25 1:08am
The bulb model for the Tiguan L headlights is H7. The Tiguan L is a vehicle under SAIC Volkswagen. Taking the Tiguan L 380TSI as an example: it is a mid-size SUV with exterior dimensions of 4716mm in length, 1859mm in width, and 1677mm in height, with a wheelbase of 2791mm. The Tiguan L 380TSI is equipped with a 2.0T 220 horsepower L4 engine, featuring a turbocharged intake form, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 162 kW and a maximum torque of 350 N·m. It uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
12
1
Share
More Forum Discussions

How to Turn Off the Engine with Keyless Start?

Here are the steps to turn off the engine after keyless start: Step 1: Press the brake pedal and bring the vehicle to a complete stop; Step 2: Shift the gear from D (Drive) to N (Neutral); Step 3: Engage the parking brake (pull up the electronic parking brake if equipped); Step 4: Release the foot brake but do not turn off the power (this is to confirm the vehicle is completely stationary under the parking brake's effect and prevent P-gear lock); Step 5: Continue pressing the foot brake and shift the gear from N to P (Park); Step 6: Release the foot brake, press the engine start/stop button to turn off the power and complete engine shutdown.
15
3
Share

What are the symptoms of shock absorber oil leakage in a car?

Oil leakage in car shock absorbers can cause symptoms such as bumpy rides and shock absorption failure. As one of the most vulnerable components during vehicle use, the performance of shock absorbers directly affects the smoothness of driving and the lifespan of other mechanical parts. Here are methods to check whether the shock absorber is functioning properly: 1. After driving the car for 10 kilometers on rough road conditions, stop and touch the shock absorber housing with your hand. If it's not hot enough, it indicates there's no internal resistance in the shock absorber, meaning it's not working. At this point, you can add appropriate lubricating oil and test again. If the housing becomes hot, it means there's insufficient oil inside the shock absorber; otherwise, it indicates the shock absorber has failed. 2. Press down hard on the bumper and then release it. If the car bounces 2-3 times, it shows the shock absorber is working well. 3. When performing an emergency brake during slow driving, if the car vibrates violently, it indicates there's a problem with the shock absorber.
12
1
Share

What is the purpose of cleaning the car's three-way catalytic converter?

Cleaning the three-way catalytic converter not only helps improve the performance of the vehicle's engine but also reduces frequent alarms from the exhaust system's oxygen sensor. The cleaning cycle for the three-way catalytic converter: 1. Typically, it needs to be cleaned every 30,000 kilometers driven. 2. When you notice increased fuel consumption or reduced power in the vehicle, it's necessary to check and clean the three-way catalytic converter as needed. 3. Every time the vehicle undergoes cleaning of the fuel injectors, throttle valve, and intake tract maintenance, the three-way catalytic converter should also be cleaned. 4. It's best to clean the three-way catalytic converter before the annual exhaust emission test, otherwise, the vehicle may not pass.
14
3
Share

What to Do When Car Tire Pressure is Too Low?

Tire pressure too low: If you have an onboard air pump, you can first inflate the tire a little and then slowly drive to the nearest repair shop for further handling, or replace it with a spare tire before going for repairs. Below are relevant explanations about low tire pressure: 1. When a car's tire pressure is too low, the most obvious phenomenon is an increase in the vehicle's fuel consumption. 2. Because low tire pressure increases the friction between the car's tires and the ground, the running resistance increases, leading to higher fuel consumption. At the same time, the tire's movement will also increase, as the increased friction will raise the tire's temperature, causing it to soften and thus reducing its usage strength. 3. If driving at high speeds for a long time, it may even lead to a tire blowout, threatening driving safety. 4. The reasons for low tire pressure can generally be divided into three categories: first, thermal expansion and contraction due to low temperatures; second, air leakage from the tire; and third, the tire may be improperly installed or the tire edge may not be properly fitted with the rim, resulting in poor tire sealing.
11
1
Share

What Are the Routine Maintenance Items for Sedans?

Routine maintenance items for sedans are as follows: 1. Check tire pressure. If the pressure is too low, inflate the tires; if the pressure is too high, release some air. 2. Inspect the vehicle chassis for any oil leaks or loose screws. After long-distance driving, rubber bushings or oil seals under the vehicle may age, leading to oil leaks. Pay special attention to the rubber bushings on the half-shafts, suspension ball joints, and the edges of the transmission for any signs of oil seepage or aging. 3. Change the engine oil. After prolonged use, engine oil tends to degrade, losing its lubricating properties and becoming cloudy. Therefore, it's necessary to drain the old oil and replace it with fresh oil. 4. Clean or replace the air filter. The air filter ensures that only clean air enters the engine. Over time, dust and impurities in the air can clog the filter, reducing its efficiency. Decide whether to clean or replace the filter based on the amount of accumulated dust. 5. Check the brake fluid, coolant, windshield washer fluid, and antifreeze. These fluids may deplete over time due to driving and engine operation. If their levels are below normal during maintenance, they must be topped up. 6. Inspect the brake pads. Use a ruler or visually check for wear on the brake pads. If severe wear is detected, replace the brake pads promptly to avoid brake failure.
5
1
Share

What are the symptoms of a broken car suspension spring?

Symptoms of a broken car shock absorber spring: 1. Weak shock absorber rebound: The rebound force of the shock absorber is provided by the suspension spring absorbing road vibrations and impacts. Once the suspension spring is damaged, it will greatly affect the rebound force of the shock absorber. 2. Poor vibration filtering effect: As the suspension spring weakens, the overall vibration filtering effect of the vehicle will deteriorate. Additionally, when driving on extremely bumpy roads, there is a high risk of the shock absorber bottoming out. 3. Shock absorber noise: Bending damage to the suspension spring can also cause the spring end face to tilt. Once the spring end face becomes tilted or bent, it will rub against the spring base during operation, producing abnormal noises.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.