What is the bulb model for the headlights of the Changan CS55?

1 Answers
MacCharlie
07/29/25 5:38pm
The bulb models for the headlights of the Changan CS55 are: the low beam uses H7, the high beam uses H1, both with 55W; the brake light is P21/5W, the turn signal is 112121W, the small light is T10/5W, and the fog light is H3/35W. The Changan CS55 has dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, with a wheelbase of 2650mm. The body structure is a 5-door, 5-seat SUV, classified as a compact SUV. The Changan CS55 is equipped with a 1.5L turbocharged engine, delivering a maximum power of 115kW at 5500 rpm, and a maximum torque of 225Nm between 2000 to 4000 rpm.
Was this review help?
16
3
Share
More Forum Discussions

Why Do New Cars Have Oil Film?

.Wiper blade aging, and the exhaust gas emitted by vehicles ahead contains a certain amount of oil smoke. Below is an introduction to oil film: Introduction: Oil film forms during driving when some impurities and oil smoke from vehicle exhaust in the air enter these pores, gradually accumulating over time. Causes: If a vehicle is frequently parked under trees, corrosive substances such as tree resin, fruit pulp, bird droppings, and insect remains will adhere to the front windshield, corroding the glass and forming an oil film. Environmental pollution from parking areas also plays a role; vehicles parked for long periods near hotel or restaurant kitchens may have oil smoke from the kitchens adhering to the glass.
4
5
Share

Do modified taillights need to be registered?

Modifications to taillights do not require registration. Below is an introduction to vehicle modifications: Introduction to modified vehicles: Modifications involve replacing, adding, or removing parts from the original factory model or altering its appearance. Reasonable and scientifically sound vehicle modifications can enhance the safety and performance of the original vehicle. Vehicle modifications serve two purposes: expressing personal individuality and improving driving performance and safety. Relevant regulations on vehicle modifications: Laws and regulations impose restrictions on vehicle modifications. The vehicle model, engine model, and chassis number cannot be altered, and the vehicle's structural integrity must not be compromised. If the vehicle's color is changed, or the engine, body, or chassis is replaced, the vehicle must be inspected. Additionally, a certificate of compliance with motor vehicle safety technical inspections must be submitted for engine, body, or chassis replacements. Decals must not cover more than 30% of the vehicle's total surface area; exceeding this limit requires approval from the relevant authorities.
6
3
Share

Are Motorcycle Licenses the Same as Car Licenses?

Motorcycle licenses and car licenses are the same, but the information annotated internally differs. Motorcycle licenses fall into three categories: E, D, and F, while car licenses are classified into three major categories: C, B, and A, with each category further divided into C1/C2/C3/C4, etc. If a motorcycle has no outstanding traffic violations, the license can be canceled by bringing valid documents to the vehicle management office. Differences between motorcycle and car licenses: The types of licenses are different. Licenses for riding two-wheeled motorcycles include categories E and F, while car licenses include categories A and B. For two-wheeled motorcycles, an E-class license allows driving F-class vehicles, whereas an F-class license only permits driving F-class vehicles with no additional permitted vehicle types. Motorcycle license test content: The first subject is a theoretical test consisting of 50 questions, with a full score of 100 and a passing score of 90 or above. Subjects two and three are taken together and typically include tests such as stake driving, stopping and starting on a slope, crossing a single-plank bridge, and are supervised by police and examiners. Motor vehicle license test content: The motor vehicle license test comprises four subjects, primarily assessing three areas: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). The test subjects are conducted in the following order: traffic regulations and related knowledge (referred to as Subject One, theory), field driving (referred to as Subject Two, nine items), and road driving (referred to as Subject Three, road test, including safe and civilized driving).
13
3
Share

What kind of oil should be added for power steering?

Add power steering fluid. The following is a related introduction about the power steering pump: Classification: Power steering systems can be roughly divided into three categories: mechanical hydraulic power steering systems, electro-hydraulic power steering systems, and electric power steering systems. The mechanical hydraulic power steering system is generally composed of components such as a hydraulic pump, oil pipes, pressure and flow control valve body, V-type transmission belt, and oil reservoir. Definition: The car power steering pump refers to a component that helps improve and stabilize car performance. It mainly assists the driver in adjusting the car's direction. Currently, most cars are equipped with power steering pumps, mainly including the steering power steering pump and the brake vacuum power steering pump.
12
3
Share

Does a new car come with underbody armor from the factory?

New cars do not come with underbody armor from the factory. Owners of newly purchased vehicles can decide whether to apply underbody armor based on their driving environment. If driving in environments with a lot of gravel or poor road conditions, it is recommended that owners apply underbody armor. If the owner primarily drives in urban areas, applying underbody armor is unnecessary. Most vehicles undergo anti-rust treatment for the underbody during the manufacturing process. Best time to apply underbody armor for a new car: The optimal time to apply underbody armor for a new car is when the vehicle has been driven approximately 60,000 kilometers. Since the underbody has protective measures from the factory, gravel encountered during driving will gradually weaken these protections. Additionally, the 60,000-kilometer mark is a major maintenance period for the vehicle, making it an ideal time for owners to apply underbody armor during this service to prevent rust. If the owner frequently drives on poor road conditions, underbody armor should be applied earlier. Function of underbody armor: Underbody armor helps protect the car's underbody during driving, preventing damage from road gravel and also reducing the risk of rust formation during vehicle use.
17
2
Share

Where is the AUX interface of Audi Q7?

The AUX interface of Audi Q7 is located under the center console armrest. The AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio in electronic products can be connected to the car audio through the headphone jack and AUX interface, and the audio can be played in the car audio broadcasting facilities. The USB interface can be inserted into a USB flash drive to play audio. When using it, insert one end into the AUX interface and the other end into a video player such as a mobile phone, MP3, or MP4. In this way, you can listen to songs or niche music anytime and anywhere, not limited to car music CDs. However, if the playback device runs out of power, the music will also stop (the interface is generally a 3.5mm labeled headphone jack). Aux is the abbreviation of Auxiliary, which is an additional signal line design. In general audio equipment, in addition to the official output and input terminals, there are often several input and output terminals labeled Aux as backup connection terminals. When there are special applications, such as additional sound output or input, this type of terminal can be used. These backup terminals or lines, whether input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connection, and can also be connected to a MODEM through a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because their respective applicable configuration environments are different. The AUX interface establishes a command-line connection between the user and the device, performing some operations that are usually impossible in user mode, such as initialization, restoring initial configuration, and correcting abnormal user modes. It provides a fixed port for the device, which can be used as a common asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration of hardware products, line backup, and other functions can be achieved. Note: When using the AUX interface, pay attention to buying the correct connecting cable, and also be careful not to plug the audio cable into the wrong port. When using the AUX interface, it is best to follow the usage steps in the product's instruction manual. If you still don't know how, you can consult the product's official website or call for advice.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.