What is the bulb model for Suzuki Ciaz headlights?

2 Answers
JamesMarie
08/31/25 5:09am
Suzuki Ciaz low beam bulb is H11 model, high beam bulb is H7 model. The steps and precautions for replacing headlight bulbs are as follows: Steps for replacing headlight bulbs: First open the engine hood and observe the layout of automotive components at the rear of the headlight. Identify the model, unscrew the lamp cover. Note the identification model of the lamp at the lower part of the headlight's outer glass. Unscrew the lamp cover, noting that removal methods may vary slightly between different vehicle models. Remove the faulty bulb and install the new one. Press the bulb with your hand, firmly pull out the socket with power cord, release the retaining clip to remove the bulb, then install the new bulb and secure it with the clip. Reassemble the headlight in reverse order. Note: When reinstalling the dust cover, ensure it's properly tightened to protect the headlight from rain and dust. Turn off the switch before replacing. Before replacing the bulb, confirm both the ignition switch and light switch are off, and ensure the bulb has cooled down. Precautions for replacing headlight bulbs: Since halogen bulbs contain pressurized gas, they require special handling. If scratched or dropped, they may explode or shatter. Therefore, only hold the plastic part or metal base of the bulb, and avoid touching the glass portion.
Was this review help?
13
5
Share
AliyahMarie
09/12/25 8:24am
As someone who frequently helps friends with car repairs, I recall that the Suzuki Alivio's headlight bulbs are standard H4 type, 60/55W halogen bulbs. I've replaced them several times myself and noticed that during installation, it's important not to touch the bulb glass directly with bare hands, as oils can cause premature burnout or reduced lifespan—it's best to use professional gloves. Beyond the bulb type, I always remind car owners to check if the headlight circuit is stable, as excessive voltage can lead to early bulb failure. Routine maintenance is simple: inspect the wiring every 5,000 kilometers to prevent short circuits that could blow a fuse. Safe driving depends on it—if there's an issue with nighttime driving, get it fixed immediately; don't skimp on that expense.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

How to Read the Digital Tire Pressure Gauge on a Car Air Pump?

How to read the values on a car air pump: First, check the unit. If it's BAR, inflate to 2.4 or 2.8; if it's PSI, inflate to 35-40; if it's KPA, inflate to 240-280. There is an M button for settings—set the preset value, then start inflating. The pump will stop automatically when the preset value is reached. If there is no preset function, inflate directly while monitoring the value and stop when the desired pressure is reached. Some gauges have a red line between 2-3, which indicates the normal tire pressure range for most vehicles. You can stop when the pointer reaches the middle of this range, though this method is less precise compared to setting a numerical value. According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar.
18
2
Share

How to Replace Wiper Blades?

Replace Wiper Blades by following these steps: 1. Lift the wiper arm naturally upwards along the direction of the wiper to separate it from the car body; 2. Tilt the wiper blade backward to make it perpendicular to the wiper arm; 3. Locate the fixing buckle at the connection between the wiper blade and the wiper arm; 4. Pull the tab outward and then push the wiper blade outward to open it; 5. Pull the buckle sideways to release it from the wiper blade connection; 6. Separate the wiper blade from the wiper arm; 7. At the corresponding port, gently insert a flat-head screwdriver about 1cm into the rubber blade, wrap the cover with a cloth, and pull the rubber blade outward; 8. Use the screwdriver to lightly pry open the hook to detach it from the rubber blade; 9. Remove the old rubber blade and replace it with a new one.
9
1
Share

The Function of Diesel Exhaust Fluid (DEF)?

Automotive Diesel Exhaust Fluid (DEF) serves to convert nitrogen oxides (NOx) in vehicle exhaust into harmless nitrogen and water, enabling vehicles to meet national emission standards. The consequences of not using DEF and methods to resolve DEF warning light alerts are as follows: Consequences of not using DEF: Excessive emissions that pollute the environment; oxidation of chemicals within the vehicle system, leading to clogged DEF injectors and potential system failure; reduced vehicle performance. The primary functions of DEF include treating exhaust to reduce pollutants, optimizing engine performance, and improving fuel efficiency. Methods to resolve DEF warning light alerts: Replace the DEF solution; replace the water heating valve; replace the DEF pump and power supply module connector.
7
0
Share

What is the working principle of a car engine?

Working principle of a car engine: It generates kinetic energy by burning fuel inside the cylinder, driving the piston in the engine cylinder to reciprocate. This movement drives the connecting rod attached to the piston and the crank connected to the connecting rod, performing a reciprocating circular motion around the crankshaft center, thereby outputting power. Intake stroke: The piston moves downward in the cylinder, the valve opens, and air and fuel are drawn in; Compression stroke: The piston moves upward, compressing the mixture of air and fuel, which is then ignited by the spark plug; Power stroke: The compressed air-fuel mixture ignites and expands, pushing the piston downward, and the piston rod drives the connecting rod to rotate; Exhaust stroke: The piston is pushed downward by the expanding gas, and after reaching the bottom, the movement of the piston in another cylinder drives the piston upward, while the exhaust valve opens to expel the exhaust gas.
3
1
Share

What does eject mean?

eject refers to the action of ejecting a CD, meaning that when you press this button, the CD inside will automatically pop out. Typically, a car control panel also includes an insert button for loading CDs, a play button, a pause button, an eject button, a stop button, and several other functional buttons. The reasons why a car CD player fails to read discs are as follows: Severely scratched disc: If the scratches on the disc are too severe, the optical sensor of the car CD player cannot read the information on the disc, resulting in failure to read the disc, disc jamming, or even system crashes; Incorrect disc format: Discs can come in various formats such as CD, VCD, and DVD. If the disc format is incompatible with the car CD player, it may fail to read the disc or eject it. Generally, car CD players cannot recognize VCDs and DVDs.
1
1
Share

Why Do Car Tires Come Off During Collisions?

Car tires come off during collisions for the following reasons: Loose screws causing tire detachment: There are numerous cases of accidents caused by tire detachment while driving, especially on highways. When a tire unexpectedly detaches at high speeds, it continues to roll "blindly" on the road with considerable kinetic energy, posing a significant risk to following vehicles that may not have enough time to avoid it, potentially leading to traffic accidents. Severe overloading and harsh working conditions: Some dump trucks are severely overloaded, and most are used in construction projects. Due to severely uneven ground and heavy loads, the excessive force on a tire during bumpy rides can cause screws to break and detach. In most cases, the fracture of steel rim screws is accompanied by a clear snapping sound, making it relatively easy to detect tire detachment.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.