What is the bulb model for Geely Panda headlights?

2 Answers
VanStella
07/28/25 9:05pm
Geely Panda headlights use H4 bulbs, and the use and maintenance of car lights should not be overlooked. Function of car headlights: The function of car headlights is to provide illumination for night driving. Car headlights, also known as automobile front headlights or LED daytime running lights, are closely related to safe driving at night or in poor weather conditions. Headlights, referred to as "headlamps," are installed on both sides of the front of the car to provide illumination for nighttime driving. They are one of the essential components for ensuring safe vehicle operation. The farther the headlight illumination distance, the more appropriate the beam angle, and the better the light distribution characteristics, the higher the safety performance of the vehicle. Maintenance of car headlights: Maintenance of car headlights includes checking the sealing of the headlights, cleaning the reflectors, cleaning the bulbs, adjusting the beam direction, and regularly replacing the headlight bulbs.
Was this review help?
16
4
Share
HeidiDella
08/12/25 1:46am
I've been driving a Geely Panda for almost two years, and the headlight model is H4 halogen bulb with 55W power. Replacing it is quite straightforward. A while ago, the right light went out, so I first checked the manual to confirm the model, bought an original bulb online for 20 yuan, unscrewed the old one, and installed the new one myself—the whole process took just half an hour. Remember to wear gloves to prevent burns; there's a small cover under the hood that you just need to lift. The bulb lifespan is about 1-2 years, and frequent night driving can accelerate aging, so I recommend checking every six months for blackening or cracks. If the light suddenly goes out, it might be a blown fuse or loose wiring—don't force it, find a safe spot to stop and check first. When replacing, choose the same model to prevent voltage instability, and if buying online, go for verified stores to avoid counterfeits. In short, maintaining good lighting ensures safe night driving, especially in rainy or foggy conditions when visibility is poor.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How to Remove the Heater in a Classic Focus?

Classic Focus heater removal method is: 1. Remove the glove box on the passenger side; 2. Remove the internal and external circulation ducts inside; 3. Go to the driver's side accelerator pedal, unscrew the mixing head downward, and push it toward the passenger side. The heater is a combined unit consisting of a fan, motor, and air heater, suitable for various types of workshops. When the air does not contain dust or flammable/explosive gases, it can be used for circulating air heating. Taking the 2021 Focus as an example, its body dimensions are: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53 liters, and trunk capacity 511 liters.
12
3
Share

Will the car be affected if it runs out of windshield washer fluid?

If the windshield washer function is not used, there will be no impact on the vehicle itself. However, if the washer function is used for a long time without windshield washer fluid, the washer pump may run dry and could potentially burn out the motor of the washer fluid reservoir. Additionally, driving without windshield washer fluid can significantly affect driving safety. Precautions when adding windshield washer fluid: 1. Pay attention to the amount of fluid added; it is best not to exceed the MAX mark, leaving some space. 2. If purchasing concentrated windshield washer fluid that needs to be diluted, always read the instructions before use. Dilute the concentrated fluid before adding it. When adding, open the windshield washer fluid reservoir in the engine compartment and pour in the prepared mixture. 3. Choose the appropriate windshield washer fluid based on your driving environment. If driving in colder climates, consider purchasing anti-freeze windshield washer fluid. In southern regions, washer fluid with insect repellent additives may be more suitable.
17
2
Share

What are the precautions for replacing a car battery?

Precautions for replacing a car battery include: 1. Confirm the battery installation location. In most models, it is installed in the engine compartment or luggage compartment, while some models may have it installed in the cabin; 2. Remove external protective devices such as the battery cover and measure the voltage between the two poles with a multimeter; 3. If the vehicle is equipped with an anti-theft system (including audio anti-theft), you can first connect an external power source or parallel a fully charged battery. Note to connect the positive terminal first and then the negative terminal. The positive terminal of the external power source can be directly connected to the positive terminal post, but the negative terminal should not be directly connected to the negative terminal post. Instead, it should be connected to the vehicle body ground; 4. Turn off the ignition switch of the faulty vehicle, disconnect the negative connection first, then the positive connection; 5. Remove the battery's fixing device and take out the battery. If the vehicle is connected to an external power source, be careful not to let the positive terminal contact the vehicle body. Use cotton cloth or other materials for isolation; 6. If the old battery has leakage or corrosion, clean the connections and other related parts.
14
2
Share

Left Foot or Right Foot for Car Braking?

Both the brake and accelerator are controlled by the right foot, with the brake pedal located on the left side and the accelerator pedal on the right. In manual transmission cars, there are three pedals from left to right: the clutch pedal, brake pedal, and accelerator pedal. Automatic transmission cars only have two pedals: the brake pedal and the accelerator pedal. This means manual cars require both feet to operate, while automatic cars only need the right foot. The braking system, also known as the deceleration system, is a mechanical device that slows down the vehicle and is one of the car's important components. Braking is achieved through intense friction between the brake pads and brake drum. A car's braking performance significantly decreases in water, so drivers should maintain safe distances and brake early during rainy conditions. During prolonged driving, both feet can become fatigued and may unconsciously press down. If the left foot happens to be on the brake pedal at this moment, accidental braking could easily occur, leading to dangerous situations. Most people naturally have more agile right feet with faster reaction times. In emergency situations, the right foot can quickly respond by lifting off the accelerator and pressing the brake pedal.
17
3
Share

What Causes Uneven Tire Wear on Car Tires?

There are several reasons for uneven tire wear on car tires: 1. Incorrect wheel alignment, which causes uneven wear when the two wheels on the same side or the front and rear wheels are misaligned during operation. The vehicle's self-correction leads to abnormal increases in friction and accelerated wear on a specific part of the tire. 2. Inaccurate toe adjustment can also cause uneven wear. This means the front wheels are slightly tilted inward at an angle similar to a pigeon-toed stance, which is the optimal angle for high-speed stability. Every car has its own toe angle, and if this angle is improperly adjusted, it can result in uneven wear. 3. Steering gear failure may also lead to uneven wear or pulling to one side. 4. An uneven or deformed chassis can cause tire wear. For example, in some accident-damaged vehicles, the cause of uneven wear is chassis or body deformation. 5. Mixing tires of different specifications or having significantly different tire pressures can also lead to uneven wear.
18
0
Share

What is the mileage for the second car maintenance?

To obtain the motor vehicle inspection qualification mark, you need to bring the vehicle license, compulsory traffic insurance, and ID card to the vehicle management office or traffic police station to receive the annual inspection mark for free. The procedure for obtaining the annual inspection sticker for exempted vehicles is as follows: 1. Vehicles exempt from inspection within 6 years, if no major accidents have occurred, are exempt from on-site inspection. However, every two years, you must go to the vehicle management office to receive the annual inspection sticker and the green environmental protection sticker. At the time of inspection, bring your ID card, vehicle license, and the current valid compulsory traffic insurance policy to the vehicle management office for processing. 2. The annual inspection sticker and green environmental protection sticker for exempted vehicles are free of charge and issued at no cost. However, a copy of the vehicle license must be provided when receiving the stickers. Arrange your time reasonably; you can apply for the exempted inspection sticker up to 60 days in advance. If overdue, a fine of 200 yuan and 3 penalty points will be imposed. 3. Before receiving the stickers, check if the vehicle has any violation records. If there are any, they must be dealt with first; otherwise, the process cannot be completed.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.