What is the bulb model for Ford Focus headlights?

2 Answers
Adriel
07/28/25 5:22pm
Ford Focus headlights use H1 bulbs for high beam and H7 bulbs for low beam. The Ford Focus is a Class A family sedan with body dimensions of 4404mm in length, 1810mm in width, 1454mm in height, and a wheelbase of 2705mm. The exterior design features a large honeycomb-style black front grille, full lower body cladding, a rear spoiler, and dual exhaust pipes. The Ford Focus is equipped with two engine options: a 1.5L EcoBoost and a 1.5L TiVCT, delivering a maximum power output at 1750-4500 rpm and a peak torque of 243 Nm.
Was this review help?
15
1
Share
MasonRose
08/11/25 11:40pm
As a Ford Focus owner, I've been driving a 2015 model for several years and know that its low-beam headlight bulbs are H11 type, while the high-beam ones could be HB3 or 9005, depending on the year. I've replaced the bulbs myself a few times—it's quite simple, just unscrew the lamp cover and plug them in directly. If you get the wrong bulb type, like using an H7, the bulb might not fit securely or be in the wrong position, which can easily cause it to burn out. This not only leaves you without light but also affects nighttime driving safety. I recommend checking the manual or entering your license plate number online to confirm the bulb type before buying, so you don’t waste money. I use branded products like Philips, which last longer—don’t cheap out on no-name brands, as they can cause light beam misalignment and poor visibility. Regularly checking your lights is crucial; if they suddenly go out, it’s dangerous, so address the issue immediately.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What to Do If 92 and 95 Gasoline Are Mixed?

Here are the solutions for adding the wrong gasoline: If the gasoline added has a higher octane rating than the car requires, for example, adding 95 when 92 is specified, you can simply consume it normally and then switch back to 92 gasoline afterward. If the gasoline added has a lower octane rating than required, such as adding 92 when 95 is specified, you only need to add a high anti-knock fuel additive. Of course, you can also directly drain the fuel and refill with 95 gasoline. To find out which gasoline your car requires, you can check the car's user manual or the fuel cap for the specified octane rating. 92 and 95 gasoline should not be mixed because they have different iso-octane contents. 92 gasoline is suitable for low-compression engines, while 95 gasoline is suitable for high-compression engines. If 92 gasoline is added to a car that requires 95, it may cause abnormal combustion, leading to knocking. Knocking not only damages the combustion chamber but also directly affects the engine's normal operation, potentially causing severe engine damage. Conversely, adding 95 gasoline to a car that requires 92 will not damage the engine, but 95 gasoline is more expensive, leading to unnecessary waste. Differences between 92, 95, and 98 gasoline: Standard gasoline consists of iso-octane and n-heptane. Iso-octane has good anti-knock properties, with an octane rating of 100, while n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, with an octane rating of 0. If gasoline is labeled 92, it means it has the same anti-knock properties as standard gasoline containing 92% iso-octane and 8% n-heptane. The same principle applies to 95 and 98 gasoline.
6
1
Share

Can Scratched Wheel Hubs Be Repaired?

Scratched wheel hubs can be repaired using the following methods: 1. First, use adhesive tape to cover the undamaged areas to prevent accidental paint application on unaffected parts; 2. After trimming the brush tip, apply touch-up paint. When the paint dries and slightly contracts, it is recommended to apply it slightly raised for easier observation; 3. After painting, wait approximately one week for complete drying. Once dry, use waterproof paper soaked in soapy water to smooth the surface; 4. After wiping with waterproof paper, use a polishing compound to restore shine, followed by waxing. The wheel hub is the cylindrical metal component inside the tire that supports it, mounted centrally on the axle, also known as the rim, steel ring, or wheel. Wheel hubs come in various types based on diameter, width, manufacturing method, and material.
3
0
Share

What is the wheelbase of the Kia VQ?

The wheelbase of the Kia VQ is 3020mm, with overall dimensions of 5130mm in length, 1985mm in width, and 1815mm in height, making it an MPV model. In terms of powertrain, the Kia VQ is equipped with two engine options: a 2.2-liter turbocharged diesel engine and a 2.7-liter naturally aspirated gasoline engine. For passive safety, the Kia VQ comes with six airbags, three-point seat belts, and a safety warning system. In terms of active safety, it features a VRS (Vehicle Stability Management) system, with a MacPherson strut independent suspension at the front and a multi-link non-independent suspension at the rear.
11
0
Share

What is the reason for the ABS light coming on after vehicle inspection?

The reasons for the ABS light coming on after vehicle inspection are: 1. Air in the system pipeline; 2. Computer system malfunction; 3. Vehicle speed sensor failure; 4. ABS wiring harness breakage. If there is air in the ABS system pipeline, it will seriously interfere with the regulation of dynamic pressure, causing the ABS system to lose its function. If the computer malfunctions, the ABS will not work properly. The activation and deactivation of ABS are achieved by the vehicle speed sensor transmitting signals to the computer. If the vehicle speed sensor fails, the ABS will inevitably not work properly. Dirty sensor connectors or improper air gaps in the sensor can also cause poor sensor performance. For example, if the sensing part of the ABS vehicle speed sensor is covered by mud, sludge, or other contaminants, it will affect the sensor's ability to detect the corresponding vehicle speed signal.
2
4
Share

How to reset the maintenance light on a Kia K5?

Method to reset the maintenance light on a Kia K5: 1. Turn the Kia K5's power to ON mode; 2. Press the steering wheel's toggle button to access user settings; 3. Press the OK button to enter maintenance settings; 4. Long-press the OK button to reset the oil maintenance mileage and time, completing the process. The Kia K5 is a sporty and premium sedan from Dongfeng Yueda Kia, with body dimensions of 4855mm in length, 1860mm in width, and 1475mm in height, and a wheelbase of 2805mm. In terms of power, the Kia K5 is equipped with a 2.0L naturally aspirated engine and a 1.6T turbocharged engine. The 2.0L engine delivers a maximum power of 118kW and a maximum torque of 193Nm, while the 1.6T engine produces a maximum power of 132kW and a maximum torque of 265Nm. For the transmission system, the engines are paired with either a 6-speed automatic transmission or a 7-speed dual-clutch transmission.
14
3
Share

How to Raise and Lower the Rear Spoiler on the Panamera?

Panamera rear spoiler operation method: On the MODO interface of the central control screen, click the left button, find the driving options, and hold down the spoiler lift button to automatically raise or lower the vehicle's rear spoiler. The car spoiler refers to the ducktail-like protrusion installed at the rear end of the car's trunk lid, which is part of the car's aerodynamic kit, mainly used to reduce the lift at the rear of the vehicle. Panamera is the Chinese translation of Porsche's Panamera, a 4-door, 5-seat coupe. The Panamera's body dimensions are 4970mm in length, 1931mm in width, 1418mm in height, with a wheelbase of 2920mm.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.