What is the bulb model for Chery A1 car?

1 Answers
NicoleAnn
07/30/25 8:41am
Chery A1 car bulb model is H7. Types and functions of car bulbs: Turn signal. The turn signal is the most commonly used signal light, activated when the vehicle needs to turn; Headlights. Headlights come in two forms: high beam and low beam. Use low beam on urban roads with streetlights, and switch to high beam on roads without streetlights or highways. During oncoming traffic, switch from high beam to low beam; Tail lights (brake lights). When the brake lights illuminate, they signal to the vehicles behind that braking is in progress, prompting them to slow down. When you notice the tail lights of the car in front lighting up, you should also prepare to slow down. Car bulb models: Car headlights include high beam, low beam, fog lights, and turn signals. There are many bulb models, mainly categorized into H and D types, which can be distinguished by the number of lamp pins and tabs. Common models include H1, H3, H4, H7, H11, etc., with different bulb models used for different positions.
Was this review help?
6
5
Share
More Forum Discussions

What does U-turn mean?

Car U-turn refers to the situation where the car changes its driving direction by 180° on roads where U-turns are permitted. Before making a U-turn, first turn on the left signal, slow down (to about five kilometers per hour) or even stop, pay attention to the road conditions, and closely monitor the traffic situation (especially for vehicles that are far away but moving at high speed). Stop and wait if necessary. Road U-turn skills: First turn on the turn signal and enter the turning lane. Before changing lanes, observe the situation in the lane you are entering, then change direction and slow down. At the stop line, reduce the speed to almost a complete stop, and after confirming safety, make a full U-turn. After completing the U-turn, stay near the central yellow line in the lane, then turn on the turn signal to enter your own lane.
18
2
Share

How to Set the Dashboard Language to Chinese in a 2009 Teana?

First, power on the vehicle. Locate the MENU button on the multifunction steering wheel and press it to select settings. Find the language option and change it from English to Chinese to complete the dashboard language setup.
9
2
Share

How to Eliminate Static Electricity After Getting Out of the Car?

You can add an anti-static chain to the exhaust pipe. When the chain touches the ground, the static electricity will be discharged. Static electricity is an electric charge at rest. When electric charges accumulate on an object or its surface, static electricity is formed. There are two types of electric charges: positive and negative, meaning static electricity also manifests in two forms - positive static and negative static. Positive static occurs when positive charges accumulate on an object, while negative static forms when negative charges gather. Regardless of whether it's positive or negative static, when a charged object comes into contact with a zero-potential object (grounded object) or an object with a potential difference, charge transfer occurs. This is what we commonly observe as spark discharge phenomena.
14
0
Share

What is the correct method for shifting from second gear to first gear?

The correct method for shifting from second gear to first gear is to engage the clutch after applying the brakes. Below are detailed instructions on the proper procedure for shifting from second to first gear: 1. Precautions: Whether upshifting or downshifting, the speed must match the gear. Only when the speed corresponds to the gear can the vehicle's performance be at its best, and the thermal efficiency of the fuel be maximized. Additionally, always decelerate before downshifting. 2. Shifting Details: Generally, when starting a motor vehicle, it is essential to engage first gear, or when climbing a steep slope. After normal driving starts, once the speed exceeds five to ten kilometers per hour, you can shift to second gear during the gap between accelerating and decelerating, increasing gears according to the speed.
20
4
Share

What to Do When the Roof Lining Fabric of a Passat Comes Off?

If the roof lining is coming off near the edge, you can directly peel open the edge, spray adhesive, let it dry for 3-5 minutes, and then reattach it. If disassembly is inconvenient at this time, you can opt for clip repair by choosing clips of a similar color. The downside is that it may not look as aesthetically pleasing, but it is a practical solution. In this case, the entire roof lining needs to be removed, the old fabric taken off, and the aged sponge on the surface cleaned thoroughly. Prepare a new piece of roof lining fabric and specialized roof adhesive. Apply adhesive to both sides, let it dry for 3-5 minutes (until it’s no longer sticky to the touch), and then attach it.
17
5
Share

How to Remove Cigarette Smell from a Car?

Most people probably dislike the unpleasant smell of cigarette smoke in their cars. So, if there's a lingering odor in your car, how can you get rid of it? Let's explore the solutions together. The first method is to clean the car's interior. The second method is ventilation. On a nice day, you can park your car in a safe and well-ventilated area, then open all the windows and doors to let fresh air circulate. The third method involves placing grapefruit or orange peels inside the car. The fourth method is to use a car air purifier or activate the car's built-in air purification system. Finally, in addition to the above methods for removing cigarette smell from your car, you can also remind your friends or yourself to open the windows when smoking and avoid smoking in enclosed spaces.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.