What is the Buick GS?

What is the appropriate speed for downshifting from fourth gear to second gear?

When downshifting from fourth gear to second gear, the speed should be reduced to around 30 km/h. First gear serves as a buffer gear; after a smooth start, slightly press the accelerator and then shift to second gear, which must be completed within 50 meters during the test. For second gear, if the speed exceeds 20 mph, you can shift to third gear, which must be completed within 150 meters during the test. Third gear is commonly used at speeds above 20 mph and below 40 mph, while fourth gear is engaged when the speed reaches 40 mph. Reasons for gearshift jerking: The engine speed does not match the current vehicle speed, meaning there is a speed difference between the engine speed and the clutch plate speed. Solutions for gearshift jerking are as follows: Adjust the gearshift speed; adjust the gear engagement sequence; shorten the gearshift time; lightly press the accelerator when shifting gears.

8

0

Share

What is the Scoring Standard for Hill Start?

Hill start scoring standard: If the vehicle's bumper is not aligned with the pole line and exceeds 50 centimeters forward or backward, 100 points will be deducted; if the vehicle rolls back more than 30 centimeters during start, 100 points will be deducted; if the vehicle's bumper is not aligned with the pole line but does not exceed 50 centimeters forward or backward, 20 points will be deducted; if the vehicle body is not parked close to the side and stops within 30 centimeters of the right line, 20 points will be deducted; if the vehicle rolls back less than 30 centimeters during start, 20 points will be deducted. Hill start techniques: Use the handbrake simultaneously during hill start; fully depress the car's clutch; maintain an optimistic attitude. Correct steps for hill start: On the slope, pull up the handbrake, press the clutch with your left foot, and shift the car into first gear; slowly and gently lift your left foot to release the clutch while pressing the accelerator with your right foot, feeling the car's forward momentum.

20

1

Share

Has the Hill Start Been Cancelled?

The "Hill Start and Stop" test item has been removed from the Category 2 driving test for small automatic transmission vehicles. After entering the vehicle, candidates should first adjust the seat, rearview mirrors, and fasten the seatbelt. Maintain a comfortable and fixed sitting posture, leaning back against the seat with hands naturally placed on the steering wheel, ensuring the distance is neither too far nor too close. Time limit for hill start: Must not exceed 30 seconds. Hill stop: Upon hearing the "hill stop" instruction (approximately 20 meters from the pole), turn on the right turn signal, steer appropriately to the right to align the vehicle slowly along the right side of the road, and pay attention to the distance between the vehicle body and the right sideline. Hill start scoring criteria: 100 points deducted if the vehicle bumper is not aligned with the pole line and exceeds 50 cm forward or backward; 100 points deducted if the vehicle rolls back more than 30 cm during start; 20 points deducted if the vehicle bumper is not aligned with the pole line but does not exceed 50 cm forward or backward.

18

1

Share

What are the speed limit regulations for urban lanes?

Motor vehicles driving on the road must not exceed the speed indicated by speed limit signs or markings; for urban roads with two or more motor vehicle lanes in the same direction and without speed limit signs or markings, the maximum speed is 70 km/h, while for closed motor vehicle-only roads and highways, the maximum speed is 80 km/h. Highway speed regulations: The speed of small passenger vehicles must not exceed 120 km/h, other motor vehicles must not exceed 100 km/h, motorcycles must not exceed 80 km/h, and must not be lower than 60 km/h. Traffic light speed regulations: There is no speed limit when approaching traffic lights or pedestrian crossings, but the speed must not exceed the road's speed limit; if the traffic lights are at road intersections or turns, the speed must not exceed 30 km/h. Generally, it should be between 30 to 60 km/h.

8

3

Share

What is the capacity of a plastic oil drum in liters?

The standard capacity of a plastic oil drum is 200 liters. Oil drums, which are barrels used for storing oil, are mostly made of iron or plastic in a cylindrical shape. The 200L oil drum sealer (crimping pliers) is specifically designed for sealing the internationally standard 200-liter (53-gallon) large-capacity oil drums. It has a diameter of 80 cm and a height of 120 cm. Originally, petroleum transactions were mostly conducted in barrels. Materials of plastic oil drums: Plastic drums are mainly made of polyethylene, polypropylene, and other plastics through blow molding or injection molding. They are used in industries such as chemical, pesticide, pharmaceutical, food, hardware electronics, and electromechanical for the outer packaging of liquid and solid items. Cleaning methods for plastic oil drums: You can use baking soda for cleaning: Baking soda powder, as a natural cleaning agent, has excellent cleaning effects and is healthier than chemical cleaners. You can put baking soda into the plastic oil drum and then add hot water.

12

5

Share

What are the requirements for adding a driving license?

The requirements for adding different types of vehicles vary. For upgrading from a C1 to a B1 license, the conditions include holding a C1 license for at least 3 years, being between 21 and 50 years old, having no full-point penalty records in the last 3 scoring cycles before application, and ensuring consistency in information such as ID card, driver's license, and address. Precautions for adding a driving license: During the process of adding a driving license, the vehicle types permitted by the original license can still be driven normally. However, in the following situations, it will be penalized as driving without a license: the original license is still valid, but driving a vehicle beyond the permitted level; driving when the original license has been revoked but the new one has not yet been obtained. New regulations for adding a driving license: Persons who have caused a traffic accident resulting in death and bear equal or greater responsibility, or those who have driven under the influence of alcohol; persons whose licenses have been revoked, or whose motor vehicle driving licenses have been revoked for less than ten years, are not allowed to add a license. In addition, corresponding physical conditions must be met.

12

0

Share

What is the Buick GS?

What is the appropriate speed for downshifting from fourth gear to second gear?

What is the Scoring Standard for Hill Start?

Has the Hill Start Been Cancelled?

What are the speed limit regulations for urban lanes?

What is the capacity of a plastic oil drum in liters?

What are the requirements for adding a driving license?

How to Adjust the Brakes of a Four-Wheel Electric Vehicle?

What does the 3C mark on glass mean?

What Causes Black Smoke Emission?

Does removing and reinstalling the bumper have any impact?