What is the break-in period for the Tayron?

1 Answers
LauraDella
07/24/25 8:36pm
Tayron's break-in period is 3,000 kilometers. During this period, the following points should be noted: 1. Drive at a constant speed; 2. Try to avoid full load; 3. Drive gently, minimizing sudden braking or acceleration; 4. Keep the RPM moderate, preferably not exceeding 3,500 rpm; 5. Avoid prolonged continuous driving; 6. Gradually increase the maximum speed during the break-in period. The Tayron measures 4,595 mm in length, 1,860 mm in width, and 1,660 mm in height, with a wheelbase of 2,731 mm. It is positioned as a midsize SUV, equipped with the EA888 2.0T turbocharged engine and the DQ500 seven-speed wet dual-clutch transmission.
Was this review help?
9
1
Share
More Forum Discussions

How to Check the Vehicle Year from the Windshield Number?

For example: "8", the number 8 indicates the year, meaning the vehicle was produced in 2008. If the dot is before the "8", it indicates production in the first half of the year, and if the dot is after the "8", it indicates production in the second half of the year. Below are detailed explanations regarding the windshield number: 1. Date Explanation: When comparing the production date on the windshield with the production date on the vehicle's nameplate (a small plate located on the left or right side above the front wheel when the hood is opened), the windshield's date must be earlier than the nameplate date. 2. Vehicle Identification Number (VIN): The VIN, also known as the vehicle identification code, is a set of seventeen alphanumeric characters. This code serves as the vehicle's ID card. Each vehicle has its own unique VIN. The letters and numbers in the VIN represent information such as the vehicle's production region, manufacturer, production year, model, etc.
10
3
Share

Does Occasional Launch Control Damage the Car?

Launch control can harm the car's transmission and engine, as this maneuver affects every moving component from the engine to the tires, making it particularly damaging to the vehicle. Launch control requires the vehicle to be able to deactivate the ESP system. ESP limits the engine's RPM during launch, preventing the engine from delivering maximum torque and thus making launch control impossible. Launch control causes wear and tear on both the transmission and the engine. Performing launch control with a cold engine can directly damage the engine and transmission. As a racing technique, launch control is recommended to be attempted on closed roads or tracks. Using launch control on public roads with traffic is dangerous (due to the high initial kinetic energy of the vehicle, making it difficult to brake within a short distance in case of emergencies). Before performing launch control, ensure the engine coolant temperature, oil temperature, and transmission fluid temperature have reached normal levels. In winter, preheating is especially necessary before attempting launch control. Launch control places an extremely high short-term load on the transmission of both manual and automatic transmission cars. There should be at least a 15-minute cooling period between two launch control attempts; otherwise, it can significantly reduce the transmission's lifespan.
3
3
Share

Does changing the license plate without changing the owner affect insurance?

Changing the license plate without changing the owner has no impact on insurance. If the vehicle's license plate is changed but the owner remains the same, you only need to provide the new vehicle registration certificate to the original insurance company as soon as possible after obtaining it, and then receive the insurance endorsement. If you only change the owner without changing the license plate, the following conditions must be met: the owner must apply to the vehicle management office within one year after completing the transfer registration or cancellation registration; the new owner must have had the right to use the old vehicle for more than one year; the original owner must have no outstanding traffic violations or unresolved traffic accidents; the original license plate can be used by the original owner on a new vehicle or on a used vehicle, but it is prohibited for others to use it. Vehicle transfer refers to changing the name of the vehicle's owner. When purchasing a used car, in addition to checking the vehicle's condition, you also need to complete the transfer procedures. According to regulations, if you want to retain the license plate, you must first complete the transfer registration or cancellation registration, transferring the old vehicle to someone else; you can also apply for scrapping and, within six months, bring the relevant documents for the new vehicle to the vehicle management office to apply for retaining the original license plate number and surrender the old plate.
18
1
Share

Can the Highlander Hybrid get a green license plate?

The Highlander hybrid version can get a green license plate. Green license plates are only available for pure electric vehicles or plug-in hybrid vehicles. New energy vehicle license plates are mainly green, divided into small new energy vehicle special license plates and large new energy vehicle special license plates, with a size of 48 cm × 14 cm. The following is a related introduction to license plates: 1. New energy vehicle special license plates: green background with black characters and black borders. New energy vehicle license plates are gradient green, while large new energy vehicle license plates are yellow-green dual-color, with the regional code part in yellow and the number part in green. 2. Large vehicle license plates: yellow background with black characters and black borders, applicable to medium and above passenger vehicles, cargo vehicles, special operation vehicles, semi-trailer tractors, and electric vehicles. 3. Trailer license plates: yellow background with black characters and black borders, applicable to full trailers and semi-trailers not fixed with tractors. 4. Small vehicle license plates: blue background with white characters and white borders, applicable to medium and below passenger vehicles, cargo vehicles, and special operation vehicles. 5. Hong Kong and Macau entry-exit vehicle license plates: black background with white characters and white borders, applicable to vehicles entering and exiting mainland China from Hong Kong and Macau. 6. Coach vehicle license plates: yellow background with black characters and black borders, applicable to dedicated coaching vehicles.
4
0
Share

How to Deal with Paint Spots on Car Surface?

Methods to deal with paint spots on car surface are: 1. Dip a towel in banana oil and gently wipe the paint spots to dilute the paint, then rinse with clean water; 2. Gasoline can dissolve paint effectively with minimal corrosiveness. Dip a towel in gasoline and gently wipe the paint spots, then rinse with clean water; 3. Paint can be removed by wiping with alcohol (industrial alcohol). Use a soft cotton cloth dipped in alcohol to gently wipe the paint; 4. Essential balm can also dissolve paint and can be used to clean paint spots. Dip a cotton cloth in essential balm and gently wipe the paint.
20
5
Share

How often should the transmission fluid be changed for the Haval H2?

The official maintenance manual for the Great Wall Haval H2 recommends changing the transmission fluid at 6,000 kilometers, 52,000 kilometers, and 100,000 kilometers. After that, it should be replaced every 50,000 kilometers or every three years, whichever comes first. More details about the Haval H2 are as follows: 1. Detail 1: The Great Wall Haval H2 is equipped with three types of transmissions. The manual transmission is a 6MT developed by Great Wall itself. The automatic transmission, a 6AT, is sourced from Hyundai's HPT, a subsidiary of the Hyundai Group, which supplies transmissions for many Hyundai/Kia models. This transmission is also used in models like the Zhonghua V5, with smooth shifting being its standout feature. 2. Detail 2: The Haval H2's 7-speed wet dual-clutch transmission is a product of Getrag. Its internal structure is similar to a manual transmission, using gear meshing for power transmission, which allows for shorter shift times and better power transfer efficiency. The dual-clutch transmission eliminates torque interruption, ensuring continuous engine power utilization. 3. Detail 3: This design contributes to fuel savings and excellent fuel economy. Additionally, the wet clutch has a wider threshold for tuning, eliminating the need for rapid shifts to control temperature as in dry clutches, which can cause jerking and hesitation. Therefore, the wet clutch offers better smoothness compared to dry clutches.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.