What is the brand of the transmission in the Haima S5?

1 Answers
DeRemington
07/29/25 11:15pm
Haima S5's transmission is a self-developed brand by Haima. The transmission model of the Haima S5 is VT3, with a maximum torque load of 220 Nm at 2200 rpm and a maximum power of 122 kW at 5700 rpm. The transmission comes in two types: manual and automatic. The manual transmission mainly consists of gears and shafts, achieving speed and torque changes through different gear combinations. The automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system.
Was this review help?
17
5
Share
More Forum Discussions

What are the Honda 7-seater models?

Honda 7-seater models include the Honda CR-V, Civic, Greiz, and others. Introduction to Honda CR-V: The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. On July 10, 2020, the new Dongfeng Honda CR-V was officially launched, offering a total of 17 variants. The new model retains the design of the overseas version, with minor optimizations in interior configuration, and continues to provide both hybrid and fuel-powered versions. Introduction to Civic: On July 11, 1972, the first-generation Civic was introduced. One of its hatchback versions featured a separately opening trunk design. The powertrain was equipped with Honda's EB series 1.2L 2-valve inline four-cylinder engine, delivering a maximum power of 60 horsepower and a maximum torque of 93 N·m. Introduction to Greiz: On September 22, 2015, Dongfeng Honda officially unveiled the concept car of its new entry-level compact model, the Greiz (GREIZ). The production version of this compact sedan was launched on November 7, 2015. The production model is powered by a 1.5L Earth Dreams engine and shares the same platform as the Guangzhou Automobile Honda City.
12
5
Share

Will points be deducted for an unaligned car body in Subject 2?

In the driving test Subject 2 examination, an unaligned car body will not result in point deductions, but the car body crossing the line will. Situations where points are deducted for the car body crossing the line: Reversing into a parking space: 100 points deducted if the car body crosses the line. Pole test: 100 points deducted if the car body or two-wheeled motorcycle wheels cross the line. Hill start and stop: After the vehicle stops, 10 points deducted if the car body is more than 750px away from the road edge line. Parallel parking: 100 points deducted if the car body crosses the line after the vehicle is parked. Additional information: According to the "Motor Vehicle Driver's License Business Work Regulations": Article 43 Subject 2 examination should select the corresponding test site and test vehicle according to the applied driving license type. The pole test is conducted under the on-site supervision of the examiner, while other test items are independently and continuously completed by the applicant according to the prescribed test route, operation specifications, and test instructions.
14
1
Share

Why hasn't the ETC fee been deducted?

The reason why the ETC fee hasn't been deducted might be due to the ETC debit card, which records the fees first and deducts them uniformly at the end of the month on the settlement day. If the fee hasn't been deducted by the end of the month, you can call the bank or ETC customer service to inquire. After all, ETC is linked to a bank card and will appear on the credit report, so it is recommended that car owners proactively check. Below is an introduction to the bank cards bound to ETC: 1. Credit Card: Car owners don't need to top up the ETC card because it is bound to a credit card, which operates on a 'pass first, pay later' basis. If there isn't enough savings in the credit card, the system will automatically deduct from the credit limit. 2. Stored Value Card: The main function of a stored value card is basic transfers and it doesn't have an overdraft feature. Just like a mobile phone's SIM card, you can only make calls if there is money in it. Similarly, a stored value card can only be used for passage if there is money in the card. Car owners need to top up the stored value card in time to avoid delays on the highway and affecting their mood.
6
0
Share

Will a scooter get damaged if left in the rain overnight?

Scooters are designed with rainproof features, so being exposed to rain for one night generally won't cause issues. However, frequent exposure to rain is not recommended. Although motorcycles lack enclosed spaces and have a certain degree of water resistance, prolonged exposure to rainwater is not advisable. Many switches and critical components remain exposed. To prevent failures or malfunctions due to sealing issues or long-term corrosion, it's best to park the vehicle in a covered area or use a protective cover to extend its lifespan. Motorcycles are characterized by being powered by gasoline engines. They are lightweight and agile two- or three-wheeled vehicles widely used for patrols, passenger transport, and cargo delivery, and can also serve as sports equipment. A motorcycle consists of five main components: the engine, transmission system, running gear, braking system, and electrical equipment. For motorcycle maintenance, it's important to regularly change the engine oil. Over time, engine oil deteriorates, and metal particles from component wear and carbon deposits from combustion can contaminate the oil. Degraded oil loses its lubricating properties, accelerating engine wear. Oil changes should be performed when the engine is warm, as the dirty oil in the crankcase flows more easily and drains better from the oil ports. It's advisable to kick the starter pedal several times to fully drain the residual oil. If necessary, fresh oil or diesel can be added for flushing.
16
5
Share

Can I get maintenance done at a 4S store other than where I bought the car?

You can get maintenance done at a 4S store other than where you bought the car. You can choose another 4S store of the same vehicle brand for maintenance, as 4S stores offer nationwide warranty services. Just bring your vehicle license and maintenance manual when getting maintenance done. Labor costs are generally similar within the same city. Additionally, the first maintenance is free within the specified time period, and you'll only need to pay if it exceeds the first maintenance requirement. Below is an introduction to new car maintenance: 1. Change engine oil and clean the three filters: Change the engine oil and clean the three filters, which are the oil filter, fuel filter, and air filter. 2. Check the car's coolant: Ensure the coolant level is within the normal range. 3. Check the car's brake system: Inspect the car's brake system and the fluid level of the clutch. 4. Check the power steering fluid level: Verify the power steering fluid level is normal and check for any oil leaks at the pipe connections. 5. Check for component aging: Examine the generator, air conditioning, water pump, and belts for aging and tension. 6. Check tire pressure and wear: Inspect tire pressure and wear condition, inflate the tires if needed, or rotate them if there is significant wear.
1
0
Share

Should You Shift Gear or Release the Handbrake First When Driving?

Either shifting gear first or releasing the handbrake first is acceptable. Below is relevant information regarding gear shifting and handbrake usage for automatic and manual transmission vehicles: 1. For automatic transmission vehicles, after starting the engine, you can first release the handbrake but must keep the brake pedal depressed, as automatic cars can only shift into D gear when the brake pedal is pressed. Alternatively, you can keep the handbrake engaged, press the brake pedal, shift into D gear, continue holding the brake, and then release the handbrake before letting go of the brake. 2. For manual transmission vehicles, after starting the engine, you can first release the handbrake while pressing the brake pedal, then shift gear and start moving. Another option is to shift gear first, and once the car has a tendency to move forward, you can release the handbrake. Whether you release the handbrake first or later has no impact. If you prefer not to use the handbrake, you can simply press the brake pedal. 3. When driving a manual transmission car, it's important to avoid prolonged attempts to start the car with the clutch in a semi-engaged state, as this accelerates the wear of both the clutch plate and the release bearing. During startup, the duration of the semi-engaged state should be controlled carefully. The clutch plate is a wear-prone component, and improper usage habits can significantly reduce its service life.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.