What is the brand of the Mazda CX4 transmission?

3 Answers
OJosie
07/28/25 3:32pm
Mazda CX4's transmission brand is Mazda's own. The transmission used in the Mazda CX4 is the Skyactiv transmission, with the model number AF406 (AWTF80S). The transmission in the Mazda CX4 is originally imported, and there are two types of transmissions used: one is a 6-speed manual transmission, and the other is a 6-speed automatic manual transmission. Typically, the automatic manual transmission refers to an AT transmission with a manual mode. The Mazda CX4 is equipped with a 2.0L or 2.5L naturally aspirated engine, a six-speed manual transmission, or a six-speed automatic manual transmission. In terms of body dimensions, the Mazda CX4 measures 4637mm in length, 1855mm in width, and 1524mm in height.
Was this review help?
11
4
Share
VonMia
08/11/25 7:54pm
I've studied Mazda's transmission technology. The CX-4 uses Mazda's in-house developed 6-speed automatic transmission, which is part of the Skyactiv Technology. This transmission is independently developed by Mazda, not a product from third-party brands, with particular emphasis on power response and fuel efficiency in its design. It employs full-range lock-up technology, meaning it can lock the clutch plates starting from low speeds, reducing power loss from traditional torque converters, resulting in quicker acceleration and better fuel economy. The tuning is quite intelligent, capable of adjusting shift strategies in real-time based on the driver's throttle input and driving conditions. It has excellent compatibility with Mazda's own engines, delivering exceptionally smooth driving experience in the CX-4, especially performing remarkably well on complex terrains like mountain roads. Of course, there might be slight variations in configurations across different model years, but they're essentially Mazda's own products, which truly reflects the brand's commitment to independent development.
Was this review help?
13
5
Share
Expand All
StDerek
09/29/25 5:33am
I've been driving my CX-4 for over two years now, and the transmission in this car is produced by Mazda itself. When I was initially choosing a car, I did some research and found that many other brands use suppliers like Aisin, but Mazda insists on developing its own Skyactiv Technology. In actual driving, it's indeed very comfortable, with minimal jerking when slowly following traffic in congestion, and it downshifts immediately for acceleration when you press the throttle harder. I remember asking the technician at the 4S dealership during the last maintenance, and he said the hydraulic control module of this transmission is specially designed by Mazda. It really shows its capability when driving on suburban mountain roads, downshifting very actively during turns without any need for manual intervention. However, the transition during auto start-stop could be a bit smoother. Overall, this powertrain is quite reliable, with no issues so far, and the matching is indeed better than cars using transmissions from other manufacturers.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

Is Filing Required for Installing a Roof Rack?

Filing is required. Below is a detailed introduction to two situations regarding the installation of roof racks on vehicles: 1. General Situation: A roof rack can be installed with approval from the vehicle management department. For small and micro passenger vehicles, owners can modify the roof rack as needed without applying for permission. 2. Special Situation: If the vehicle is originally equipped with a roof rack, items such as roof baskets and luggage boxes can be installed legally and compliantly. If the vehicle is not originally equipped with a roof rack, an application must be submitted to the local vehicle management department.
16
0
Share

What is an Engine Oil Filter?

An engine oil filter is an oil cleaner. Here are some introductions about the engine oil filter: 1. Definition: The function of the engine oil filter is to filter the engine oil. The role of engine oil in the car's lubrication system mainly includes lubrication, rust prevention, sealing, cleaning, cooling, etc. 2. Function: The metal friction parts inside the engine are lubricated and protected by the engine oil. As the usage time accumulates, metal wear debris will enter the engine oil. If special equipment is not used to filter out the metal debris (such as iron filings, aluminum filings, etc.) in the oil, these particles will circulate inside the engine with the oil, causing greater safety threats to the engine.
3
4
Share

What is the minimum ground clearance of the 2020 Teana?

The minimum ground clearance of the 2020 Teana is 132 millimeters. The minimum ground clearance of the 2020 Teana refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the 2020 Teana, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The Teana is a premium mid-to-high-end luxury sedan under the NISSAN brand. With its exceptional qualities as a new high-end luxury sedan, introduced through Nissan's joint venture in Taiwan, the Teana is often regarded as the first true product of the collaboration between Dongfeng and Nissan. The dimensions of the 2020 Teana are 4901 mm in length, 1850 mm in width, and 1447 mm in height, with a wheelbase of 2825 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 2020 Teana is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the 2020 Teana. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-maintained roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid damage to the undercarriage.
19
3
Share

What is the reason why the Lynk & Co 03 Bluetooth is connected but cannot play music?

The reasons why the Lynk & Co 03 Bluetooth is connected but cannot play music are as follows: 1. The phone volume is not turned on: You can enter the phone's settings, find the "Media" option in "Sound", and turn up the "Media" volume. 2. The phone program does not match the car model's pairing code: Change the Bluetooth playback frequency band to use Bluetooth for music normally. 3. The car Bluetooth music is not turned on: Find the multimedia option on the screen, enter the interface, and select the Bluetooth music playback option. 4. The phone audio is not turned off: Enter the phone's Bluetooth settings interface, turn off the media audio, and keep the phone audio.
7
0
Share

Where is the cabin air filter located in the Hongqi H7?

The cabin air filter of the Hongqi H7 is located in the glove compartment under the windshield on the front passenger side. The position of the cabin air filter varies among different vehicle models, with two main locations: some are situated under the front windshield, while others are placed in the glove compartment under the windshield on the front passenger side. Relevant information about automotive cabin air filters is as follows: 1. Introduction: The automotive cabin air filter is a specialized filter designed for air purification inside the vehicle cabin. It uses activated carbon composite filter material, which combines highly efficient adsorption material activated carbon with long-fiber non-woven fabric, featuring a compact structure. 2. Function: It can effectively filter smoke odors, pollen, dust, harmful gases, and various odors. The filter also efficiently filters and adsorbs particulate impurities, achieving oil filtration and air purification performance.
9
0
Share

Where is the cabin air filter located in the BAIC Senova X35?

The cabin air filter of the BAIC Senova X35 is installed behind the glove box on the passenger side. Here are the specific details about the Senova X35: 1. Vehicle Positioning: The Senova X35 is a compact family SUV launched by BAIC's Senova brand, with body dimensions of 4300*1815*1640mm and a wheelbase of 2570mm. 2. Powertrain: The Senova X35 is exclusively equipped with a 1.5L engine codenamed A151, delivering maximum power and peak torque of 116 horsepower and 148 N·m respectively. In addition to the 5-speed manual transmission, it also offers an Aisin 4AT transmission option.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.