What is the braking distance of the Exeed LX?

What is the microphone hole on the car navigation for?

The MIC hole on the car navigation device is the microphone's sound pickup hole. When you call the number on the GPS with your phone, you can hear the people talking in the car. Below is more information about car navigation devices: 1. A car navigation (Car-Navigation) is an auxiliary device that helps users accurately locate their current position, calculates the itinerary based on a predetermined destination, and guides users to the destination through map display and voice prompts. 2. The operation of the car navigation mainly relies on the Global Positioning System (GPS); it is mainly composed of a chip, antenna, processor, memory, and screen.

7

5

Share

What does dual-lens LED headlight mean?

Dual-lens LED headlights are lights that can make the light source pass through the reflection of the lens, making the light softer and more uniform. Here is more information about LED headlights: 1. LED (Light-Emitting-Diode), which is a light-emitting diode, is a solid-state semiconductor device that can convert electrical energy into visible light. It can directly convert electricity into light. The heart of an LED is a semiconductor wafer. One end of the wafer is attached to a bracket, one end is the negative electrode, and the other end is connected to the positive electrode of the power supply, so that the entire wafer is encapsulated by epoxy resin. 2. LEDs can directly emit red, yellow, blue, green, cyan, orange, purple, and white light.

18

4

Share

Why does the steering wheel always feel like it's leaning to the left?

The reasons for the steering wheel leaning to the left are as follows: 1. Most vehicles experience steering wheel deviation issues due to incorrect four-wheel alignment data or uneven wear and varying grip of the front tires. 2. If the vehicle exhibits driving deviation, misaligned steering wheel, or abnormal tire wear such as cupping or feathering, these issues are typically caused by incorrect four-wheel alignment data, necessitating a four-wheel alignment service. 3. However, some vehicles may experience changes in four-wheel alignment data after prolonged use or mileage accumulation. Even if the aforementioned issues are not present, it is advisable to perform a four-wheel alignment to prevent abnormal tire wear like cupping or feathering when replacing new tires. There are generally two main forms of vehicle deviation: 1. Braking deviation, where the vehicle's direction shifts when braking. 2. Driving deviation, where the driver must constantly hold the steering wheel to maintain straight-line driving under normal conditions. Some believe that if the vehicle does not move straight when the steering wheel is released on a flat road, it indicates deviation. This conclusion may not be entirely accurate. A practical tip is that if you constantly need to apply force to keep the vehicle straight during daily driving, it likely indicates deviation. If no such sensation exists, there is generally no issue.

3

1

Share

How many kilowatt-hours does it take to charge an electric car once?

Electric vehicles require different amounts of electricity to charge depending on the specific model. In fact, to determine how much electricity is needed for a full charge, you simply need to look at the battery capacity. Battery capacity is measured in KWH (kilowatt-hours), where 1 KWH equals 1 kilowatt-hour of electricity. Therefore, the number of KWH the battery has represents how much electricity it can output, and conversely, how much is needed to fully charge it. Additional Information: 1. In reality, electric vehicle batteries are not allowed to be completely discharged, so charging will not be at full capacity. Typically, an electric vehicle battery is around 10Ah, with a voltage of 48V (some are 36V). The charging voltage is slightly higher, around 60V, resulting in 600Wh. This means a full charge requires 0.6 kilowatt-hours of electricity. 2. Taking the Tesla Model-3 pure electric vehicle as an example, the 2019 Long Range All-Wheel Drive Model-3 has a battery capacity of 75kWh (kilowatt-hours), while the 2019 Standard Range Rear-Wheel Drive version has a battery capacity of 60kWh. Since each kilowatt-hour equals 1 kilowatt-hour of electricity, the Long Range All-Wheel Drive Model-3 requires 75 kilowatt-hours to charge from 0 to full, and the Standard Range Rear-Wheel Drive Model-3 requires 60 kilowatt-hours.

13

1

Share

How to Maintain an Engine?

Automobile engine maintenance methods are as follows: 1. Use high-quality engine oil: Engine oil, also known as engine lubricant, serves functions such as lubrication, cleaning, cooling, sealing, and reducing friction in the engine. Only by using qualified lubricating oil can the wear of engine components be reduced, thereby extending the engine's lifespan. Therefore, it is important to regularly top up with high-quality engine oil and avoid using substandard products or allowing the engine to run low on oil. 2. Use qualified coolant (antifreeze): The automobile engine relies on the radiator to dissipate heat, which is crucial. Otherwise, the engine may overheat, causing severe damage. Ensure the coolant level in the radiator is maintained within the normal range and use high-quality coolant. Especially in winter, select an appropriate coolant based on the ambient temperature. As part of regular maintenance, the engine antifreeze should be replaced annually. 3. Regularly clean radiator scale: Rust and scale buildup in the engine radiator are common issues. These deposits can restrict coolant flow in the cooling system, reducing heat dissipation efficiency and leading to engine overheating or even damage. During routine maintenance, choose a coolant with the right ratio based on specific conditions. When adding coolant, ensure the level is between the minimum and maximum marks. 4. Regularly remove carbon deposits: Carbon buildup is inevitable during fuel combustion in a car. Excessive carbon deposits can cause issues such as difficulty starting, unstable idling, poor acceleration, backfiring during sudden acceleration, excessive exhaust emissions, and increased fuel consumption. These negatively impact the engine. To prevent carbon buildup, adopt good driving habits such as driving at high speeds occasionally, increasing shift RPM appropriately, avoiding prolonged idling, and using clean gasoline. If carbon deposits are severe, take the car to a repair shop for cleaning. 5. Replace the "three filters" on time: The three filters refer to the air filter, oil filter, and fuel filter. These filters protect the engine by filtering air, oil, and fuel, thereby improving engine efficiency. To keep the engine in optimal condition, replace the filter elements at scheduled intervals or when they become dirty. 6. Maintain reasonable RPM: During normal driving, maintaining a reasonable RPM ensures smooth engine operation. However, prolonged driving at low gear with high RPM or high gear with low RPM can overload the engine, leading to increased fuel consumption and potential engine damage. Therefore, match the RPM with the gear appropriately, apply the throttle gently, and avoid sudden acceleration.

11

3

Share

What causes the ABS warning light to illuminate in a Peugeot 2008?

There are multiple states in which the ABS light may illuminate, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed or the wheel slip rate, thereby disabling its ability to issue commands to adjust braking. Solution: Clean the contaminants from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose system wiring connections or poor contact in the ABS relay, leading to system failure. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple electrical components are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. Alternatively, the ABS system's power supply voltage may be too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start but turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for increased gaps in connectors. Replace the ABS or ABS/ASR control unit if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS control unit detects a significant discrepancy between rear and front wheel speeds during high-speed driving; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's recommended tire and wheel rim specifications, typically found on the label near the fuel filler cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage fully downward, then release the pedal to complete self-adjustment. Replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advisable not to continue driving. A lit ABS light indicates a malfunction in the anti-lock braking system, which can lead to wheel lock-up during emergency braking, causing loss of vehicle control and skidding. This poses significant safety risks as it may prevent the driver from slowing down or adjusting the vehicle's trajectory.

15

4

Share

What is the braking distance of the Exeed LX?

What is the microphone hole on the car navigation for?

What does dual-lens LED headlight mean?

Why does the steering wheel always feel like it's leaning to the left?

How many kilowatt-hours does it take to charge an electric car once?

How to Maintain an Engine?

What causes the ABS warning light to illuminate in a Peugeot 2008?

How much can the Lincoln Adventurer's sunroof open?

What are the differences between Lincoln and Lynk & Co?

Which domestic company does Lincoln Motors partner with in China?

Is the Lincoln fuel consumption high?