What is the braking distance of a car?

1 Answers
BlakelyDella
07/30/25 1:32am
Under normal circumstances, the braking distance of a car traveling at 100 kilometers per hour is between 38-42 meters. If the value exceeds this range, it indicates poor performance of the car's braking system, and it should be checked at a professional auto repair shop promptly. Braking distance is one of the key parameters to measure a car's braking performance. It refers to the distance traveled by the vehicle from the moment braking begins until the car comes to a complete stop when the vehicle is at a certain speed. It is the distance covered by the car from the instant the driver presses the brake pedal hard until the car stops completely at a certain speed. It includes two parts: reaction distance and braking distance. The shorter the braking distance, the better the braking performance of the car. According to the national standards GB-12676 and GB/T-13594, the braking distance of cars has the following requirements: for passenger cars with fewer than 9 seats and an initial speed of 50Km/h, it should not exceed 19m. For other vehicles with a total mass of less than 4.5t and an initial speed of 50Km/h, it should be less than 21m. For other cars and car trains with an initial speed of 30Km/h, it should not exceed 12m. The length of the braking distance is an important factor in determining whether the braking system of the car is working properly. The heavier the car, the greater the inertia, and the more powerful the braking system it needs. Of course, due to the exceptionally strong power of some supercars, their braking systems are also top-notch. For family cars, the time from 100 kilometers per hour to a complete stop is generally about 3 seconds, but the distance can be as long as 40 meters. Tests have shown that among the cars on the market, the BMW 530i has the most outstanding braking distance, reaching 37.8 meters. Some cars require 46 meters from 100 kilometers per hour to 0, which, although in compliance with national safety standards, in critical moments, a car with an excellent braking distance can save the owner's property and even life.
Was this review help?
19
2
Share
More Forum Discussions

What is the correct shutdown procedure for one-button start?

The correct shutdown procedure for one-button start is as follows: Press and hold the brake pedal to bring the vehicle to a smooth stop; then shift the gear from D to N and engage the parking brake; release the foot brake but do not turn off the power, then continue pressing the foot brake, shift the gear from N to P, release the foot brake, press the one-button start button, the power turns off, and the shutdown is complete. The one-button start device is part of a smart car, a button device that simplifies the startup process, and can also be used to shut down the engine. This device can be retrofitted in place of the original car key lock or installed as an independent panel. The function of one-button start differs from traditional mechanical key ignition and conventional startup procedures. Simply press the one-button start button to start or shut down the engine, eliminating the hassle of losing or searching for keys. During the ignition process, it is mostly necessary to press the foot brake.
14
2
Share

What Are the Benefits of Cleaning the Throttle Body?

The benefits of cleaning the throttle body include: 1. Protecting the normal operation of the throttle body; 2. Effectively cleaning and unclogging the gum and carbon deposits in the fuel injectors, maintaining the cleanliness of the fuel system; 3. Reducing exhaust emissions, saving fuel, and protecting the oxygen sensor and catalytic converter; 4. Preventing issues such as knocking, unstable idle, and poor acceleration caused by gum and carbon deposits; 5. Lubricating the valves and valve guides; 6. Lubricating the upper cylinder area, reducing piston ring wear, and extending service life. The throttle body is a controllable valve that regulates the air entering the engine, and there are two types: traditional cable-operated and electronic throttle bodies.
6
1
Share

What Are the Taboos When Picking Up a New Car?

Taboos when picking up a new car include: 1. Avoid emergency braking, as insufficient tire grip may lead to loss of vehicle control; 2. Avoid overloading, keeping the load within 70% to 80% of the rated capacity; 3. Avoid long-distance trips, which can cause excessive wear and tear on components and affect lifespan; 4. Avoid high speeds, maintaining engine speed between 2,000 to 4,000 RPM; 5. Avoid changing oil too early, as new car oil has lower viscosity and better heat dissipation. After purchasing a new car, pay attention to: 1. Warming up the engine before starting to allow sufficient lubrication time; 2. Regularly checking fluids and tire pressure to identify safety issues; 3. Driving at a steady speed and frequently shifting gears to facilitate engine and transmission break-in; 4. Understanding the vehicle's blind spots; 5. Adjusting the steering wheel, seat, and rearview mirror positions properly.
6
5
Share

What compensations can be claimed when a new car is hit and the other party is fully at fault?

When a new car is hit and the other party is fully at fault, you can claim full compensation for all resulting losses. You may demand the other party to compensate for the vehicle repair costs and reasonable transportation expenses during the repair period. If the fully at-fault party refuses to pay the repair fees, you can initially cover the repair costs yourself and then file a lawsuit to claim compensation after obtaining the repair invoice. The People's Court shall support claims for the following property losses caused by traffic accidents when the injured party requests compensation from the infringer: 1. Expenses incurred in repairing the damaged vehicle, loss of items carried in the vehicle, and vehicle rescue costs; 2. If the vehicle is destroyed or irreparable, the replacement cost for a vehicle of equivalent value to the damaged one at the time of the accident; 3. For vehicles legally engaged in commercial activities such as goods or passenger transportation, reasonable losses due to inability to operate; 4. For non-commercial vehicles, reasonable expenses for usual alternative transportation due to inability to continue using the vehicle.
7
1
Share

What does adaptive high beam mean?

Adaptive high beam refers to a headlight system that can automatically switch between high and low beams to adapt to changing driving conditions, enhancing safety during night driving. The vehicle's adaptive high beam system utilizes a camera mounted near the rearview mirror to detect oncoming vehicles within a range of up to 400 meters. If an approaching vehicle is detected, the system selectively dims the high beam to avoid glare. Conversely, when no vehicles are detected ahead, it automatically switches back to high beam, eliminating the need for drivers to manually toggle between beams and ensuring minimal disruption to oncoming traffic.
15
0
Share

How to Easily Solve Brake Squealing Noise?

Methods to easily solve brake squealing noise: 1. The squealing noise from brakes is caused by excessive wear of brake pads. It is recommended to regularly replace brake pads to ensure driving safety; 2. The squealing noise can also be caused by overly tight brakes, which can be appropriately adjusted for looseness; 3. For squealing caused by rust on brakes, it is advised to regularly clean rust off the brake pads; 4. When brakes produce squealing noises, lubricant can be used to reduce unnecessary friction between brake pads. Daily preventive measures should be taken, such as keeping the vehicle dry and parking it under a shelter when not in use to prevent rainwater from corroding the brakes.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.