What is the brake pad reset method for the 2020 BMW 325Li?

[MacEloise]

BMW 325 brake reset involves long-pressing the black button at the bottom left of the dashboard until the oil or brake pad indicator appears. Below is relevant information about BMW brakes: Method for BMW brake reset: Close the car door and turn on the key; long-press the black button at the bottom left of the dashboard until the oil or brake pad indicator appears; when a triangle symbol appears in the middle, do not release the button; when the brake pad indicator appears, release the button and long-press it again, "RESET" or "Reset" will be displayed, then release and long-press once more to complete the reset. In car maintenance, brakes are a very important aspect. Working principle of car brake pads: The working principle of brakes mainly comes from friction, using the friction between the brake pads and the brake disc (drum) and between the tires and the ground to convert the kinetic energy of the moving vehicle into heat energy after friction, thereby stopping the car. A good and efficient brake system must provide stable, sufficient, and controllable braking force, and have good hydraulic transmission and heat dissipation capabilities.

[DiValentina]

I remember changing the brake pads on my 2020 BMW 325Li, and the reset procedure was quite simple. First, turn the car key to the second position without starting the engine, then press the BC button on the left side of the steering wheel to enter the menu options. In the service menu, find the brake maintenance reset option and confirm it. The reset is mainly to clear the wear warning light in the system. Don’t underestimate this light—if it stays on, it can affect driving alerts. If the light doesn’t go off after following the steps, check for poor contact or the need for a diagnostic computer to reset it. I recommend using a high-quality brake pad brand and performing the reset to ensure safety. It’s also good practice to regularly check your brakes.

[HarperAnn]

Resetting the brake pads on the 2020 BMW 325Li can actually be done via the onboard system. When I do it myself, I usually start by turning the vehicle to the power-on state, then use the scroll wheel on the right side of the steering wheel to select the vehicle settings and enter the service functions. There, you'll find the reset option—just confirm with one click. Why reset? Because the system records wear data, and if you don't reset it after installing new pads, the warning light may mislead the driver. Sometimes, wiring faults can also affect the outcome. To be extra safe, I always keep an OBD scanner handy for auxiliary diagnostics, ensuring the reset is successful so I can hit the road with peace of mind.

[SanKevin]

The brake reset for the 2020 BMW 325Li is straightforward. Turn the key to the second position, navigate to the menu via the control panel, and reset the brakes. This will turn off the warning light. If the light remains on, don't panic—it might be a sensor issue. Remember to perform this step immediately after replacing the brake pads.