What is the box in the middle of a car called?

1 Answers
MacCarson
07/30/25 4:40am
The box in the middle of a car is called the center armrest box. There are two types of center armrest boxes: one for the front seats and another for the rear seats. The front seat armrest box often includes additional features such as cup holders and storage compartments. The rear center armrest box is generally retractable. Classification of center armrest boxes: There are two main categories of modified armrest boxes commonly found in the market: one is the engineering plastic armrest box assembled from one-time molded plastic parts, and the other is the handcrafted armrest box, which combines wood and plastic and is mainly covered with sponge and leather. Engineering plastic armrest box: The engineering plastic armrest box primarily uses ABS resin as the main raw material and is roughly divided into three parts: the main armrest box, the middle connecting trapezoidal box, and the base. Its characteristics include high production volume and convenient material sourcing, resulting in lower costs and affordable prices. Consequently, it has a relatively large market share. Handcrafted armrest box: The handcrafted armrest box uses environmentally friendly high-density board as the frame, supplemented by injection-molded parts and metal components. Its design is human-centered, not only enhancing driving practicality but also showcasing outstanding aesthetic appeal.
Was this review help?
7
3
Share
More Forum Discussions

Is the 2015 BMW X1 rear-wheel drive?

2015 BMW X1 is rear-wheel drive. Starting from the 2016 BMW X1, all BMW X1 models became front-wheel drive, with the front-wheel drive BMW X1 built on BMW's UKL front-wheel drive platform. Below is the relevant introduction of the 2015 BMW X1: 1. The 2015 BMW X1 is equipped with a 2.0-liter turbocharged engine, producing 156 horsepower and a maximum torque of 240 Nm. The engine's maximum power is achieved at 5000 to 6250 rpm, and the maximum torque is available at 1250 to 4400 rpm. This engine features BMW's Double VANOS and Valvetronic technologies and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission. 2. The 2015 BMW X1 uses a double-joint independent suspension for the front suspension and a multi-link independent suspension for the rear suspension.
8
0
Share

What are the components of an electronically controlled fuel injection system?

An electronically controlled fuel injection system consists of the following three subsystems: the fuel supply system, the intake system, and the electronic control system. 1. Fuel Supply System: The fuel supply system is composed of the fuel tank, fuel pump, fuel filter, pressure regulator, pulsation damper, fuel injector, as well as fuel supply lines and return lines (travel car rental). 2. Intake System: The intake system includes the air filter, throttle valve, air flow meter, intake chamber, idle control valve, and intake control valve. The functions of the fuel supply system and intake system are to mix the fuel injection quantity and intake air quantity determined by the ECM/ECU based on the throttle position (engine load) and engine speed into a combustible mixture, which enters the cylinder for combustion and power generation. 3. Electronic Control System: The electronic control system consists of several sensors that detect various engine conditions, an ECU that determines the fuel injection quantity based on sensor signals, and fuel injectors that operate according to ECU commands. Its main function is to determine the optimal fuel injection timing and duration based on different engine operating conditions.
18
3
Share

How to Use High Beam Headlights?

How to use high beam headlights: 1. Understand when to turn on high beams. According to Article 48 of China's "Road Traffic Safety Law": High beams should not be used on roads with streetlights or other good lighting conditions. 2. Decide whether to use high beams based on road conditions. When driving on main urban roads, even at midnight, road lighting is usually sufficient, so high beams are unnecessary. On mountain roads or rural areas, turn on high beams after dusk to prevent accidents. 3. Turn off high beams when meeting oncoming vehicles. Article 48 also states: Vehicles using high beams should switch to low beams at least 150M before encountering another vehicle. 4. Alternate between high and low beams. On poorly lit roads with frequent oncoming traffic, flashing between high and low beams can alert other drivers without blinding them. This is especially important on two-way roads without median barriers. 5. Avoid high beams in foggy conditions. Fog reduces light transparency, causing light diffusion that reduces visibility and endangers oncoming traffic. 6. Adjust high beam height. Many SUVs and off-road vehicles have taller bodies, making their high beams shine farther and brighter, potentially affecting other drivers more significantly.
20
0
Share

Where can a C5 vehicle be modified?

Only small automatic transmission family cars or automatic transmission low-speed small trucks can be modified. After purchasing the vehicle, you can find a qualified modification unit for modifications, or you can purchase a national standard-compliant auxiliary driving device for disabled people online and modify it yourself.
19
2
Share

How Long After a Car is Submerged Can It Be Driven?

Check whether the air filter on the engine has been flooded. As long as the air filter is not flooded, the car can be started at any time. Flooded cars can be repaired to a certain extent, but even after repair, there are serious hidden dangers. The longer the soaking time, the higher the probability of failure. If the car is severely flooded, it is also a good choice for the owner to opt for scrapping. Below is an introduction to the relevant knowledge about flooded cars: 1. Water-immersed car: If the water level exceeds the chassis of the car, it is called a water-immersed car. 2. Semi-flooded car: If the water level exceeds the oil dipstick, it can be called a semi-flooded car. 3. Fully flooded car: If the water level has exceeded the engine hood or the dashboard panel, then it is called a fully flooded car.
3
2
Share

Where is the memory card stored in a dash cam?

The memory card of a dash cam is generally located on the side or near the power switch of the device. Depending on the model, it may be positioned at the top front of the dash cam, hidden on the left side for concealed types, or on the right side for bullet-shaped models. The functions of a dash cam are as follows: 1. Protecting the legal rights of drivers: It provides valid evidence for the driver. Many traffic accidents are caused by violations. With this device installed, the 20 seconds before and after an accident can be clearly replayed, effectively preventing fraudulent insurance claims by fabricating fake accident scenes. 2. Playback of recorded footage: The responsibility for an accident becomes immediately clear, allowing traffic police to handle the incident quickly and accurately. This enables rapid clearance of the scene to restore traffic flow while preserving crucial evidence of the event, contributing to a safer and smoother traffic environment. 3. Reduction in accident rates: If every vehicle is equipped with a dash cam, drivers would be less inclined to violate traffic rules recklessly, leading to a significant decrease in accident rates. Vehicles involved in accidents can be recorded by dash cams of other vehicles, greatly reducing hit-and-run cases.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.