What is the box behind the exhaust tailpipe?

How to Install a Fallen Rearview Mirror?

If the rearview mirror has fallen off, the installation method is as follows: If it's just the mirror glass that has come off, you can simply reattach it. Below is relevant information about car rearview mirrors: 1. Working Principle: Rearview mirrors have a field of view issue, which refers to the range that the mirror surface can reflect. The industry mentions three key elements of the field of view: the distance between the driver's eyes and the rearview mirror; the size of the rearview mirror; and the curvature radius of the rearview mirror. 2. Design Points: The aspects to consider for rearview mirrors include the obtainable field of view (indirect vision), image distortion, image clarity, image size, the position of the image in the mirror, etc., making it easy to adjust according to changes in the driver's viewpoint. 3. Classification: Rearview mirrors can be divided into three main series: flat mirrors, spherical mirrors, and double-curvature mirrors. There is also another type called the prism mirror, which has a flat surface but a prism-shaped cross-section, typically used as an anti-glare interior rearview mirror.

4

1

Share

How to Open the Front Hood of a Corolla?

The front hood release switch of the Corolla is located in the control area to the left of the steering wheel. Gently press the unlock button, and the hood will slightly pop up. There is a latch position under the hood, in the middle of the front hood. Only after releasing the latch can the engine hood be opened. Below are the relevant precautions for opening the front hood of the Corolla: 1. Before closing the engine hood of the Corolla, the owner must ensure that the support rod is placed back into its fixed position. If the support rod is still in place when closing the hood, it may cause the hood to bend. Check and confirm that the engine hood is fully closed and locked. If the hood is not properly locked, it may open while driving, leading to an accident that could cause serious injuries or even fatalities. 2. The method to close the Corolla's engine hood is very simple. Pull the hood down, place both hands on the front edge of the hood, corresponding to the positions of the headlights on both sides, and press down gently. You don't need to use too much force; just listen for a click. Avoid pressing too hard on the central part of the hood. It's best not to slam the hood shut, as it is made of aluminum alloy, and excessive force could cause dents.

11

2

Share

Can I not buy car insurance if the car is not driven for a year?

It is possible not to pay for car insurance if the car is not driven for a year. According to the "Compulsory Traffic Insurance Regulations," the owner or manager of a motor vehicle that is driven on the roads within the territory of the People's Republic of China must purchase compulsory traffic insurance. If the owner or manager of the motor vehicle fails to purchase compulsory traffic insurance as required, the traffic management department of the public security organ has the right to detain the motor vehicle, notify the owner or manager to purchase insurance in accordance with the regulations, and impose a fine of twice the amount of the insurance premium that should be paid. It is best not to skip paying insurance if the car is not driven for a year. If the vehicle reaches the time for insurance renewal but the owner does not handle it and lets it lapse, the owner may face a rate increase when renewing the insurance later. Moreover, vehicles that have "lapsed" in insurance coverage will need to undergo a new inspection when renewing, adding to the insurance procedures and causing more trouble for the owner. If the car is temporarily not in use, it is best to first go to the vehicle management department to complete a suspension procedure, and the annual inspection will be postponed accordingly, so there will be no impact. Otherwise, it may affect the vehicle and vessel tax included in the compulsory traffic insurance.

20

1

Share

Which Side is the Accelerator Pedal in a Car?

For manual transmission vehicles, there are three pedals in the following order from left to right: clutch pedal, brake pedal, and accelerator pedal. For automatic transmission vehicles, there are two pedals in the following order from left to right: brake pedal and accelerator pedal. Below are some related introductions about the accelerator: 1. The throttle of a car engine is generally controlled by a pedal, also known as the accelerator pedal, which is a device for controlling the fuel supply of the vehicle engine. 2. When operating the accelerator pedal, the right heel should be placed on the floor of the driver's compartment as a pivot point, with the sole gently pressing on the accelerator pedal, using the flexion and extension of the ankle joint to press down or release. When pressing or releasing the accelerator pedal, the force should be gentle, ensuring a light press and slow release. 3. When starting the engine, do not press the accelerator pedal all the way down; it is better to have it slightly above the idle throttle. When starting off, it is advisable to apply a little throttle just before the clutch engagement point, with the throttle opening preferably at a small to medium level. Releasing the clutch should be closely coordinated with pressing the accelerator, and the action should be swift.

18

5

Share

Starting Jerks Like Fuel Starvation?

First, it could be due to the engine, caused by blockages or insufficient pressure in the fuel supply system. Second, it might be related to the clutch, where clutch wear leads to insufficient transmission power, which is also one of the main reasons for weak starting and jerking. Several specific causes for this issue include: 1. Cold engine. Especially during cold starts in winter, the temperature inside the engine is insufficient, and the temperatures of both fuel and lubricating oil are too low. Therefore, more fuel should be injected during cold starts to meet power requirements. Poor fuel atomization at low temperatures leads to reduced ignition energy, affecting power performance and causing the car to shake. 2. Carbon deposits in the engine and intake tract. Since carbon deposits can absorb a certain amount of fuel, the ECU makes incorrect judgments. For example, if the computer controls the injection of 100 units of fuel-air mixture, but only 90 units actually enter the cylinder, with 10 units absorbed by carbon deposits, even if the remaining 90 units burn completely, the required power performance cannot be achieved, making shaking inevitable. 3. Ignition system failure. Aging of the ignition system weakens the ignition energy, causing the ignition coil or spark plugs to fail to ignite continuously or to have interruptions during ignition. Intermittent ignition prevents smooth and continuous power output, resulting in jerky acceleration.

17

1

Share

How to solve the random jumping issue of the central lock on Baojun 730?

Generally speaking, this issue with the central lock is caused by dislodged components. Simply remove the door panel and inspect the locking mechanism for any worn, dislodged, or damaged parts. If parts are dislodged, secure them back in place; if they are damaged, replace them. If no specific fault point is observed, it is best to leave it to professionals for handling. Here is some additional information: 1. Central locking system in cars: The full name of the car central lock is Central Control Door Lock, which refers to a switch located next to the driver's seat that can simultaneously control the closing and opening of all car doors. When the driver locks the door next to them, all other doors are also locked. The driver can use the door lock switch to open all doors simultaneously or open a single door individually. When the vehicle reaches a certain speed, all doors can automatically lock. Additionally, besides the door next to the driver, other doors are equipped with separate spring lock switches, allowing independent control of a single door's opening and locking. 2. Functions: To enhance convenience and driving safety, modern cars are increasingly equipped with central locking systems. The central lock must have anti-theft functionality. When in use, the central lock also prevents doors from opening while driving, providing excellent protection for children's safety.

20

3

Share

What is the box behind the exhaust tailpipe?

How to Install a Fallen Rearview Mirror?

How to Open the Front Hood of a Corolla?

Can I not buy car insurance if the car is not driven for a year?

Which Side is the Accelerator Pedal in a Car?

Starting Jerks Like Fuel Starvation?

How to solve the random jumping issue of the central lock on Baojun 730?

Is the Post-Purchase Failure Rate of the New Regal Very High?

How to Deal with Iveco EDC Malfunction?

Where is the fuel filler cap switch of the Volkswagen Lavida located?

What Engine Displacement is Suitable for Highway Riding?