What is the boundary when meeting on a curve?

What brand does German Iman audio belong to?

German Iman audio belongs to Helix. Introduction to car audio: The earliest use was car AM radios, later AM/FM radios, tape players, which evolved into CD players and compatible DCC, DAT digital audio. Nowadays, car audio has reached a high standard in terms of sound quality, operation, and vibration resistance, capable of handling the bumps on rough roads while ensuring stable performance and perfect sound quality. The role of car audio: The most basic requirement is the function of sound playback. Any audio system must include the following points to qualify as an audio system, and car audio is no exception. Car audio mainly consists of three parts: the head unit, speakers, and amplifier. The head unit is the most important component of car audio, just like the human brain, controlling what kind of sound is produced.

14

3

Share

Can a car undergo annual inspection in another city?

Vehicles can undergo annual inspection in a different location. Below is an introduction to relevant knowledge about vehicle annual inspection: 1. Definition: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." 2. Legal basis: According to the relevant provisions of the "Regulations for the Implementation of the Road Traffic Safety Law," Article 16: Motor vehicles shall undergo safety technical inspections within the following periods from the date of registration. 3. Classification: Initial annual inspection and regular annual inspection.

13

4

Share

Is 180 Degrees a Full Turn or Half Turn?

180 degrees is half a turn. Below is more information about steering wheel operation: 1. Correct steering wheel grip: Hold the left and right sides of the steering wheel firmly with both hands, fingers curling inward from the outside, with thumbs naturally extended along the rim. 2. Three methods of steering wheel operation: (1) Push-pull method (correction method): Suitable for straight-line driving. The left hand dominates while the right hand assists, making minor adjustments to maintain straight-line driving. When deviating from the straight path, slight steering wheel adjustments are sufficient. For lane changes, gently push or pull the steering wheel. (2) Hand-over-hand method (half-turn method): Suitable for general turns. When continuous steering is required, turn the wheel evenly with both hands coordinating. For wide-radius turns, one hand pushes while the other pulls, typically not exceeding half a turn each way, completing the turn in 2-3 coordinated movements. (3) Cross-hand method (full-turn method): Used for sharp turns or U-turns requiring quick steering. For a left turn, the right hand pushes while the left hand pulls, then crosses over; the left hand releases and quickly moves to the upper right to pull down while the right hand continues pushing up. Reverse the process for right turns or straightening.

20

5

Share

How Slow is Too Slow for Reverse Parking Without Timing Out?

Reverse parking will time out if it exceeds 210 seconds. Under normal circumstances, following the half-clutch engagement speed during the test, it typically takes around 170 seconds to complete. While slowing down can improve accuracy when aligning reference points, excessively slow speeds throughout the entire test process may easily lead to timing out. Reverse parking consists of left-side and right-side parking, with stop lines on both sides of the bay. The 210-second countdown begins when the vehicle enters the test area and the front wheels cross the left bay's stop line. Upon entering the test zone, an audio announcement "Begin reverse parking" will play, requiring the candidate to complete the parking procedure within 210 seconds until the rear wheels pass the right bay's stop line. For instance, when initially adjusting the bay-side distance to 30-50cm upon entering the test area, you can confidently adjust at half-clutch speed. As you approach the stop line to prepare for reversing, gently depress the clutch to slow down for precise alignment. After alignment, slightly release the clutch since the vehicle will follow the set steering angle regardless of speed. Key attention should be paid to depressing the clutch when preparing to steer or at reference points to decelerate in advance. By only slowing down during alignment moments, timing out can be avoided.

9

2

Share

What is the reason for the sudden illumination and then disappearance of the car's oil pressure warning light?

The reasons for the sudden illumination and then disappearance of the car's oil pressure warning light are as follows: 1. Excessive oil viscosity: The viscosity of the oil is closely related to its quality. The higher the viscosity, the better the oil's resistance to high temperatures, and vice versa. 2. Pressure relief valve blockage or improper adjustment: To prevent excessive oil pressure in the lubrication system, which increases engine power consumption and causes oil leaks at sealed connections, a pressure relief valve is installed on the main oil passage or oil pump. 3. Insufficient oil quantity: If the oil quantity is insufficient, the oil pump's output will decrease or fail to pump oil due to air intake, leading to a drop in oil pressure. This results in increased wear on the crankshaft and bearings, as well as the cylinder liners and pistons due to poor lubrication. 4. Engine overheating: Excessive scale in the engine cooling system, poor heat dissipation, prolonged overload operation, or delayed fuel injection timing can all cause the engine to overheat. 5. Oil filter blockage: When the oil filter is blocked and cannot circulate, the bypass valve on its base opens, allowing oil to bypass the filter and enter the main oil passage directly.

16

1

Share

What are the trunk dimensions of the Borgward BX7?

The five-seater Borgward BX7 has a maximum trunk depth of 1890mm, a regular depth of 990mm, a minimum width of 1010mm, and a height of 740mm. Official data shows that the standard trunk capacity of the five-seater BX7 is 545 liters, with a maximum capacity of 1377 liters. Below is the relevant introduction about the trunk dimensions of the Borgward BX7:1. Trunk dimensions of the seven-seater Borgward BX7: After folding down the second and third-row seats of the seven-seater Borgward BX7, the space is quite ideal with good flatness. However, with the last row of seats in the upright position, the trunk space is very limited due to a depth of only 300mm, allowing only items like backpacks to be placed.2. Trunk dimensions of the six-seater Borgward BX7: After folding down the second and third-row seats of the six-seater model, the flatness remains quite good, and the space is similar to that of the seven-seater version. However, there is a noticeable depression in the second row, which should be considered when making a choice.

3

4

Share

What is the boundary when meeting on a curve?

What brand does German Iman audio belong to?

Can a car undergo annual inspection in another city?

Is 180 Degrees a Full Turn or Half Turn?

How Slow is Too Slow for Reverse Parking Without Timing Out?

What is the reason for the sudden illumination and then disappearance of the car's oil pressure warning light?

What are the trunk dimensions of the Borgward BX7?

Should You Turn Off the Engine First or Shift to P Gear First in an Automatic Transmission?

What does it mean when a Volvo displays 'Insufficient Battery' after turning off?

What's the Difference Between 16-inch and 18-inch Wheels?

Where is the water temperature gauge located on the Teana?