What is the bolt pattern of the Mondeo wheel hub?
3 Answers
The bolt pattern of the Mondeo wheel hub is 5x108, with a center bore of 63.3. The wheel hub is the rotating part of the wheel rim that connects to the tire through spokes, serving as the metal component that supports the tire and mounts onto the axle. Wheel hubs are prone to accumulating dirt, and if not cleaned for a long time, they can corrode and deform, leading to potential safety hazards. The Mondeo is a mid-size sedan sold by Ford Motor Company in multiple markets worldwide, featuring standard 8 airbags, including front airbags, side curtain airbags, knee airbags, and rear side curtain airbags. In terms of body dimensions, the Mondeo measures 4873mm in length, 1852mm in width, and 1470mm in height, with a wheelbase of 2850mm.
I've been driving a Mondeo for five years and enjoy DIY part replacements. I remember clearly the wheel bolt pattern is 5x108mm, meaning there are five bolt holes arranged in a circle with a diameter of 108mm. This spec is crucial—wrong bolt pattern means the wheels won't fit, causing earthquake-like vibrations. A friend ignored my advice and tried installing 5x114.3 wheels, but the bolt holes didn't align, nearly damaging the brake discs and wasting hundreds. Center bore matters too, typically around 63.4mm, with offset (ET) usually between 45-55—don’t cut corners. For aesthetics, stick to OEM-matched sizes or use wheel spacers (though spacers may reduce stability). Safety first: when unsure, check the manual or visit a shop for measurements.
Hey, as a young owner of a Mondeo, I've tinkered with wheel modifications online a few times. The bolt pattern is the 5x108mm type—remembering this can help you avoid pitfalls. If the bolt pattern doesn't match, the wheels will wobble when installed, and taking sharp turns at high speeds feels like a death wish. The first time I bought wheels online, I didn’t pay attention to the bolt pattern and ended up with 5x100 ones. I forced them on, only for the nuts to loosen mid-drive, scaring me into pulling over immediately. A center bore of 63.4mm is fine if it’s slightly larger; you can make do with spacers. An offset around ET50 won’t affect handling. Before swapping wheels, I recommend removing an old one to check the bolt pattern. When shopping online, filter for 5x108 options to avoid wasting money like I did. For peace of mind, go for brands that specifically label their wheels as Mondeo-compatible.
