What is the body weight of the Prado?

Where is the Aiways U5 produced?

Aiways U5 is produced in China. It is a pure electric SUV model under Aiways Automobile. Taking the 2021 Aiways U5 as an example, its body structure is a five-door, five-seat SUV with dimensions of 4680mm in length, 1865mm in width, and 1700mm in height, a wheelbase of 2800mm, a luggage compartment volume ranging from 432 to 1555 liters, and a curb weight of 1770kg. The 2021 Aiways U5 features a MacPherson independent front suspension and a multi-link independent rear suspension, equipped with a permanent magnet synchronous motor, and adopts a front-engine, front-wheel-drive layout.

6

1

Share

What are the methods to defog the car interior during summer rainy days?

Methods to defog the car interior during summer rainy days include: 1. Wipe clean with a towel; 2. Turn on the car heater to clear fog; 3. Use the air conditioning's cooling and dehumidifying function to reduce air humidity; 4. Apply car glass anti-fog spray. The reason for fogging inside the car during summer rainy days is the temperature difference between the inside and outside of the car, where the interior temperature is higher than the exterior, causing water molecules in the air to condense into fog upon cooling. Methods to maintain car glass include: 1. Use appropriate glass water according to the season; 2. Apply car glass insulation film. The functions of car glass are: 1. To shield against wind and rain, and reduce noise; 2. To lower wind resistance and guide airflow; 3. To protect the safety of passengers.

11

3

Share

What are the methods to remove residual car film?

Methods to remove residual car film include: 1. Wipe with a damp cloth; 2. Spray and wash with a specialized adhesive remover; 3. Clean with foam cleaner; 4. Wipe with vinegar, then scrape off after the vinegar dissolves the adhesive; 5. Apply mentholatum; 6. Use alcohol for wiping; 7. Remove with car heat insulation cleaner. The functions of car film are: 1. Block heat generated by infrared rays; 2. Filter ultraviolet rays to protect skin; 3. Enhance safety and explosion-proof capability, as the film's base layer is polyester film with strong tear and puncture resistance; 4. Maintain privacy and security; 5. Reduce air conditioning load; 6. Minimize accidents caused by glare.

6

4

Share

How to Adjust the Off-Center Reversing Camera?

Methods to adjust an off-center reversing camera: 1. If the camera is directly mounted on the license plate without drilling, simply reposition it to the exact center; 2. For cameras fixed via drilled holes, visit a 4S shop for professional centering calibration. The reversing camera, also known as a parking assist system, reverse visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for safer reversing or driving assistance. This system employs a wide-angle infrared camera installed at the rear of the vehicle, displaying a clear view of rear obstacles on the in-car screen.

20

3

Share

How to Set the Time on Wuling Hongguang?

To set the time on the Wuling Hongguang, follow these steps: 1. Press and hold the clock button until you hear a beep, then release the button; 2. The time display will start flashing. To set the hour, press and hold the preset button (h) until the hour increments to the desired time; 3. To set the minutes, press the (m) button, following the same principle as setting the hour. Press the clock button to confirm the set time. Taking the 2020 Wuling Hongguang as an example, it is a microvan with the following dimensions: length 4390mm, width 1660mm, height 1750mm, wheelbase 2720mm, fuel tank capacity of 50 liters, and a curb weight of 1185kg.

7

5

Share

What are the precautions for using a new car?

Precautions for using a new car are: 1. Warm up before starting; 2. Avoid emergency braking; 3. Avoid overloading; 4. Do not drive long distances; 5. Do not drive at high speeds; 6. Use high-quality gasoline; 7. Do not remove the speed limiter in advance; 8. Shift gears in time; 9. Properly adjust the ignition system and fuel supply system. The recommended RPM for a new car should be determined according to specific conditions: 1. During the first 500km, keep the RPM below 2,300; 2. From 500 to 1,000km, keep the RPM below 3,000; 3. From 1,000 to 1,500km, keep the RPM below 3,500.

7

1

Share

What is the body weight of the Prado?

Where is the Aiways U5 produced?

What are the methods to defog the car interior during summer rainy days?

What are the methods to remove residual car film?

How to Adjust the Off-Center Reversing Camera?

How to Set the Time on Wuling Hongguang?

What are the precautions for using a new car?

Where is the air conditioning filter located in the Renault Koleos?

What are the main reasons for difficulty in starting a hot car engine?

What documents are required for the annual inspection of vehicles exempt from inspection for 6 years?

How to Deal with Tire Noise?