What is the body weight of the Magotan?

2 Answers
CharlieMarie
07/29/25 3:16am
The body weight of the Magotan ranges from 1470 to 1550 kilograms. The Magotan is a B-segment sedan under the Volkswagen brand, with dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2812mm. The Magotan is equipped with a 1.8TSI engine, which is Volkswagen's new-generation engine that perfectly combines turbocharging technology with gasoline direct injection technology. Starting from the headlights, the Magotan features two sharp character lines that form a waistline, complementing the body lines to create a dual-waistline design. Combined with the prominent wheel arch lines and the chrome anti-scratch strips moved downward to the bottom, the side profile of the car appears more visually stable.
Was this review help?
15
0
Share
AdrielLee
08/12/25 7:08am
I always prioritize car safety, and when driving the Magotan, I feel the body is sufficiently heavy, weighing around 1,450 kg. This weight provides stability on highways, making the car less prone to shaking or rolling, especially when turning in rainy conditions. The heavy body absorbs collision impacts well, enhancing the effectiveness of airbags and protecting passengers from serious injuries. Of course, it slightly increases fuel consumption—about half a liter more per 100 km in the city—but Volkswagen engines are efficient, so the actual difference is minimal. When choosing a car, I prioritize safety; the heavy body gives a solid feel, and paired with adaptive cruise control, long-distance driving becomes much more comfortable. The weight also affects handling, making steering responsive and not sluggish.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the normal tire pressure for a Geely Emgrand?

The suitable tire pressure for a Geely Emgrand is between 2.3 and 2.5 bar. Below are the specific details about the Geely Emgrand: Vehicle Dimensions: The Geely Emgrand is a compact 4-door, 5-seater sedan with a body length of 4632mm, width of 1789mm, height of 1470mm, and a wheelbase of 2650mm. Powertrain Configuration: The Geely Emgrand is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 80 kW and a maximum torque of 142 Nm. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using a torsion beam non-independent suspension.
6
1
Share

How to Replace the Battery in a Civic Key?

The method to replace the battery in a Civic key is: 1. There is a small switch on the front of the key; push it in the direction shown and pull out the key. 2. There is a groove on the top of the smart key; use the pulled-out metal key to pry it open. 3. Remove the old battery, then insert the new battery with the positive side facing up, and finally, put the cover back on. The Civic is a compact car under Dongfeng Honda, with a length, width, and height of 4649mm, 1800mm, and 1416mm respectively, and a wheelbase of 2700mm. The car's tires use more environmentally friendly rubber materials, incorporating silicon particles that help reduce tire heat during driving, and also feature special tread patterns to improve drainage performance.
14
2
Share

How to Replace the Fuel Filter of Qoros 3?

Qoros 3 fuel filter replacement method is: 1. Remove the grounding wire and unscrew the screws of the fuel filter mounting bracket; 2. Place a basin under the fuel filter, press the green part of the inlet pipe firmly with your thumb and forefinger, then remove the inlet pipe. You can use one hand to pull while covering with a towel in the other hand to prevent gasoline splashing; 3. Remove the outlet pipe and replace the old fuel filter with a new one. The Qoros 3 is a model launched by Qoros Auto, with dimensions of 4615mm in length, 1839mm in width, 1445mm in height, and a wheelbase of 2690mm. The vehicle comes standard with an 8-inch capacitive touchscreen, Bluetooth system, USB port supporting iPod playback, and AUX audio input port.
9
4
Share

What transmission does the Baojun 530 use?

Baojun 530 uses a 5-speed mechanical transmission, 6-speed manual transmission, and 6-speed dual-clutch transmission. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixed or stepped changes in the output shaft and input shaft transmission ratio. It consists of a transmission mechanism and a control mechanism, with some vehicles also featuring a power output mechanism. The Baojun 530 is a compact SUV under SAIC-GM-Wuling, with dimensions of 4695mm in length, 1835mm in width, and 1750mm in height, and a wheelbase of 2750mm. The vehicle's instrument panel adopts a fully electronic display design, enhancing the sense of technology while also allowing the driver to conveniently and intuitively read the speed and RPM.
4
4
Share

What is the four-wheel drive system of the Audi Q5L?

The four-wheel drive system of the Audi Q5L is an on-demand four-wheel drive system. This system only switches to four-wheel drive when appropriate, while remaining a two-wheel drive system under other conditions. The on-demand four-wheel drive system automatically switches between two-wheel drive and four-wheel drive modes based on the vehicle's driving conditions, without requiring manual operation. The Audi Q5L is a mid-size SUV under FAW-Volkswagen Audi, with a length, width, and height of 4753mm, 1873mm, and 1659mm respectively, and a wheelbase of 2908mm. The vehicle offers features such as a multifunction steering wheel, full LCD instrument panel, 8.3-inch multimedia display, MMI navigation Plus system, head-up display system, and more.
3
4
Share

What kind of adhesive is used for car bumpers?

Car bumpers can be bonded using epoxy resin adhesive. The functions of car bumpers and the repair methods for front bumper cracks are as follows: Functions of car bumpers: Car bumpers (also known as impact beams), located in the front and rear areas of the vehicle, are designed to prevent external damage from affecting the vehicle's safety systems. They have the ability to reduce injuries to occupants during high-speed collisions and are increasingly designed for pedestrian protection. Repair methods for front bumper cracks: Smooth the entire bumper to facilitate repair. Clean the dirt around the damaged area of the bumper to ensure the putty adheres firmly. Using a brush generally yields good results. If oil stains are found on the bumper, the putty will adhere more easily, so it is best to use paint thinner to repair any areas where the paint has peeled off.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.