What is the body weight of the BYD Qin Plus DM-i?

Where is the radiator located in a Nissan Teana?

The radiator in a Nissan Teana is located in the front engine compartment, next to the power steering fluid reservoir. The maintenance methods for the radiator include: 1. Park the vehicle and turn off the engine, wait for the coolant temperature to drop, then open the expansion tank and add radiator cleaner; 2. Start the engine and let it idle for 5 to 10 minutes after the cooling fan starts working; 3. Turn off the engine and remove the front bumper of the vehicle; 4. Ensure the coolant temperature has completely cooled, then drain the radiator cleaner along with the coolant and replace it with new engine coolant. The Nissan Teana is a mid-size 4-door 5-seater sedan with body dimensions of 4901mm in length, 1850mm in width, 1450mm in height, and a wheelbase of 2825mm.

12

3

Share

Is the window film applied on the inside or outside?

Window film is applied on the inside for the following reasons: 1. It is not exposed to wind and rain, slowing down the aging process and extending its service life; 2. The film is less susceptible to external interference during use, avoiding scratches and damage. The areas where window film is applied include: front windshield film, rear windshield film, side window film, and quarter window film. The functions of window film are: 1. Heat insulation and sun protection to reduce the temperature inside the car; 2. UV protection to reduce the aging of car interiors; 3. Preventing injuries to passengers in case of accidental glass breakage; 4. Creating a private space; 5. Reducing air conditioning consumption; 6. Enhancing aesthetics; 7. Reducing glare.

11

0

Share

What are the solutions for engine overheating?

Solutions for engine overheating: If the engine temperature is too high, you need to stop driving and then open the engine hood to allow the engine to cool down. Most cars use water-cooled engines, which rely on coolant circulation to dissipate heat. If the engine overheats, the reasons may be: 1. Some pipes in the cooling system are blocked; 2. The coolant has not been changed for a long time; 3. The thermostat is damaged. The coolant has two circulation paths in the engine: one is the large circulation, and the other is the small circulation. The thermostat controls the switching between the large and small circulations. If the thermostat is faulty, the engine will continue to operate in the small circulation even after reaching the normal operating temperature, leading to overheating.

2

1

Share

What suspension does the Corolla use?

The Corolla uses a MacPherson independent suspension at the front and an E-type multi-link independent suspension at the rear, with a front-engine, front-wheel-drive layout. The Corolla is a compact car with body dimensions of 4635 mm in length, 1780 mm in width, and 1455 mm in height, a wheelbase of 2700 mm, a fuel tank capacity of 50 liters, and a trunk capacity of 470 liters. The Corolla is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85 kW at 5200-5600 rpm and a maximum torque of 185 Nm at 1500-4000 rpm, paired with a 10-speed continuously variable transmission.

1

5

Share

How to remove the gear lever solenoid valve of Changan CS75?

When removing the gear lever solenoid valve of Changan CS75, first, the oil pan needs to be detached, followed by replacing the solenoid valve on the valve plate. Below is a partial introduction to the shift solenoid valve: 1. If the shift solenoid valve malfunctions, issues such as gearbox shift hesitation, slipping, impact when engaging gears, or inability to upshift may occur. 2. The shift solenoid valve operates the shift valve to alter the control oil circuit of the actuating components (clutch; brake), causing the clutch or brake to engage or disengage, thereby connecting or fixing a certain component of the planetary gear mechanism or a clutch gear on the balance shaft to achieve automatic shifting.

5

2

Share

What are the diesel engine oil grades?

Diesel engine oil grades include 0W, 5W, and 10W. Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower limits on the dipstick. If too much oil is added, the oil volume will expand as the engine temperature rises, increasing the pressure in the oil chamber and operational resistance. This can lead to reduced vehicle power and increased fuel consumption. Overfilling oil: Excessive oil can cause oil to leak through the crankcase vent pipe. Increased crankcase pressure may loosen the oil seals due to oil pressure, resulting in oil leaks. Heat dissipation: Overfilling oil can affect engine heat dissipation.

10

4

Share

What is the body weight of the BYD Qin Plus DM-i?

Where is the radiator located in a Nissan Teana?

Is the window film applied on the inside or outside?

What are the solutions for engine overheating?

What suspension does the Corolla use?

How to remove the gear lever solenoid valve of Changan CS75?

What are the diesel engine oil grades?

How Often Should Gear Oil Be Changed in a Sedan?

How to reset the maintenance reminder on Changan CS75?

How Many Kilometers for a New Car's Break-in Period?

What are the three stages from a novice to an experienced driver?