What is the body material of the BYD Han?

1 Answers
StJaxon
07/30/25 3:26am
BYD Han utilizes 1300MPa hot-stamped steel in its body structure, applied at 43 locations with a total usage of 97kg, combined with its 360-degree full-cage frame structure. During collisions, the impact energy is absorbed in three stages by the front compartment, gradually reducing energy release and thereby minimizing occupant impact. The Han comes standard with 11 airbags, including side airbags and curtain airbags, among other soft protective measures. BYD has specifically reinforced the thickness of the left and right longitudinal beams, coupled with its proprietary structural design, significantly enhancing side impact resistance and effectively reducing the likelihood of structural deformation post-collision. In terms of steel selection, the BYD Han features a high-strength steel ratio of up to 67.7%, with the highest strength reaching 1300MPa. It is precisely based on these high-strength foundational materials and the excellent structural design incorporating extensive hot-stamped steel body components that the BYD Han maximizes passenger safety.
Was this review help?
6
1
Share
More Forum Discussions

What does automatic clutch version mean?

Automatic clutch version refers to a car equipped with an automatic clutch transmission, which simplifies the driver's operation. The automatic clutch, also known as the automatic clutch control system, mainly consists of components such as an electric oil pump, solenoid valve, and clutch oil cylinder, primarily controlled by the ECU. The automatic clutch is an independent system that achieves automatic control of clutch engagement and disengagement through mechanical, electronic, and hydraulic means. It is composed of a clutch drive mechanism, control computer, gear sensor, wiring harness, display and voice unit, and other components. It is mainly designed for manual transmission models and can be installed without altering the original vehicle structure.
12
4
Share

Where is the Porsche Cayenne's cabin air filter located?

Porsche Cayenne's cabin air filter is located beneath the glove compartment on the passenger side. Open the upper section of the passenger footwell to find a black plastic panel with two retractable clips. Remove this panel to access the cabin air filter. The replacement interval for a car's cabin air filter depends on usage conditions. For typical urban household vehicles, it's recommended to replace it every six months or annually. The Porsche Cayenne measures 4918mm in length, 1983mm in width, and 1696mm in height, with a wheelbase of 2895mm. It is equipped with a 2.9T twin-turbocharged engine paired with an 8-speed automatic transmission. This engine delivers a maximum power output of 324kW and peak torque of 550Nm.
12
2
Share

Where is the water temperature gauge on the Volkswagen Lavida?

The Volkswagen Lavida does not have a water temperature gauge, only a water temperature warning light. When the water temperature light turns red, it indicates that the engine coolant temperature is too high, and the vehicle should be stopped to prevent engine damage. When the water temperature light turns blue, it indicates that the coolant temperature is too low, and the engine needs to be warmed up. However, some modified models can display the water temperature gauge on the instrument panel by pressing the button at the top of the windshield wiper stalk. The dimensions of the Volkswagen Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine paired with a 7-speed dual-clutch transmission, delivering a maximum power of 110kW and a maximum torque of 250Nm.
8
4
Share

What documents are needed for the second application of a temporary license plate?

The procedures are the same as the first time. You need to prepare a copy of the owner's ID card, a copy of the "registration" page of the car purchase invoice, a copy of the vehicle qualification certificate, a copy of the compulsory insurance policy, and then fill out an application form at the licensing office. The following are the classifications of temporary license plates: 1. Yellow temporary license plate: The yellow temporary license plate can be used both out of town and within the city, with a validity period of 30 days, and can be applied for up to three times. 2. Blue temporary license plate: The blue temporary license plate can only be used within the city, with a validity period of 15 days, and can be applied for up to three times.
15
4
Share

Are Steering Wheel Shift Paddles Practical?

With shift paddles, when the vehicle is in Drive (D) mode, drivers can manually override the transmission at any time using their fingertips. This operation is particularly useful when rapid acceleration is needed for overtaking. When the driver downshifts consecutively, the engine RPM surges instantly, providing sufficient power to swiftly pass slower vehicles ahead. This demonstrates the advantages that shift paddles offer to drivers. Below is information about steering wheel-mounted shift paddles: 1. Shift paddles are typically gear-shifting devices found in certain automatic transmission vehicles, allowing gear changes without using the gear selector lever by simply pulling the shift paddles. 2. This feature is widely used in sports cars and coupes that emphasize performance. As a quick-shifting device, shift paddles can significantly enhance driving maneuverability. 3. Shift paddles are generally located behind the steering wheel. When operating them, drivers usually only need to have the gear in D, S, or manual mode. Using shift paddles enables drivers to perform upshifts and downshifts without taking their hands off the steering wheel.
2
4
Share

Is It Necessary to Press the Clutch When Braking?

When braking in a manual transmission vehicle, it is not always necessary to press the clutch. The key factors to consider are the vehicle speed, gear position, and engine RPM. The engine's power is transmitted to the gearbox through the clutch, and the gearbox alters the engine's RPM (by shifting gears) before transmitting it to the wheels. Here is some additional information: 1. Synchronized Rotation of Engine and Wheels: The engine and wheels always rotate synchronously at a certain ratio. For example, in 1st gear, the engine rotates 4 times while the wheels rotate once. When shifted to 2nd gear, the engine rotates 3 times while the wheels rotate once. Pressing the clutch disconnects the engine from the wheels, allowing them to operate independently. However, when the clutch is not pressed, the engine RPM, gear position, and vehicle speed must all correspond. 2. Lower Limit of Engine RPM: The engine RPM has a lower limit, which is the idle speed. If the RPM falls below idle, the engine is prone to stalling. Therefore, the theoretical minimum speed for each gear is the vehicle speed corresponding to the engine's idle RPM. When the vehicle speed in a particular gear drops below this threshold, the engine may stall. During deceleration, as long as the current vehicle speed is above the idle speed for that gear, there is no need to press the clutch. Similarly, when braking in the current gear, pressing the clutch is unnecessary as long as the engine RPM does not drop below idle.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.