What is the body length of the GAC Trumpchi GM6?

1 Answers
DiMicah
07/30/25 1:05am
The body length of the GAC Trumpchi GM6 is 4780mm, equipped with a 1.5T L4 turbocharged engine. The engine delivers a maximum horsepower of 169 hp and a maximum torque of 265 Nm, with the maximum torque available between 1700 to 4000 rpm. It features ABS anti-lock braking system, brake assist, tire pressure monitoring, electronic stability control, front seatbelt reminder, and lane departure warning system. The GAC Trumpchi GM6 has a fuel tank capacity of 52L, with front MacPherson strut independent suspension and rear torsion beam non-independent suspension. The tire specification is 215/60R16.
Was this review help?
17
5
Share
More Forum Discussions

Where is the air filter of the Qashqai located?

The air filter of the Qashqai is located behind the glove box on the passenger side. Additional information: Function of the air filter: The air filter serves a filtration purpose, cleaning the air entering the cabin from outside, thereby improving air purity. The typical filtration targets include impurities in the air, such as tiny particles, pollen, bacteria, industrial exhaust, and dust. The air filter prevents these substances from entering the air conditioning system, protecting the system from damage, providing a good air environment for passengers, safeguarding their health, and preventing window fogging. Cleaning tips: If the filter is dirty, clean it by blowing compressed air from the opposite side. Hold the air gun about 5 cm away from the filter and blow at a pressure of 500 kPa for approximately 2 minutes. The air filter tends to accumulate a lot of dust, and blowing compressed air can remove the loose dust.
16
2
Share

How to use the Nissan Sylphy igniter?

Directly press the one-touch start button and keep the brake pedal depressed to start the vehicle. Additional information is as follows: Igniter: An igniter refers to a device that can provide sufficient energy in an instant to ignite pulverized coal, oil (gas) fuel and stabilize the flame. The automobile igniter is a system for starting the vehicle's engine. The igniter mainly consists of a power source, ignition coil, distributor, ignition switch, spark plug, additional resistor and its short-circuit device, high and low voltage wires, etc. The causes of igniter failure are as follows: Poor contact in the circuit, circuit damage causing grounding, etc.; The igniter chip has a high-speed misfire phenomenon; The red and black wires of the sensor are connected in reverse.
6
3
Share

How Many Kilometers Between Each Maintenance for the 10th Generation Accord?

The maintenance interval for the Accord is every 5,000 kilometers. Additional information is as follows: First Maintenance for the Accord: The first maintenance for the Accord is performed at 5,000 kilometers. This free maintenance can be done at any GAC Honda 4S store nationwide. The main tasks include checking the vehicle's condition and replacing the engine oil and oil filter. Subsequent maintenance services will be based on this, with decisions made on whether to replace or clean/add various fluids and parts depending on their wear and tear. Transmission Fluid Replacement Cycle for the Accord: The transmission fluid replacement cycle for the Accord varies by model. The 2.0L and 2.4L models, which use a CVT transmission, require transmission fluid replacement every 40,000 kilometers. The 3.0L model, equipped with a 6AT transmission, has a transmission fluid replacement cycle of every 60,000 kilometers.
1
3
Share

How Many Cylinders Does the Lynk & Co 03 Engine Have?

Lynk & Co 03 engines come in both three-cylinder and four-cylinder configurations. The 1.5-liter turbocharged engine is a three-cylinder, while the 2.0-liter turbocharged engine is a four-cylinder. Additional Information: Power Performance: The Lynk & Co 03 is a compact car that utilizes three different engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. All 1.5T models of Lynk & Co use three-cylinder engines. Characteristics of Three-Cylinder Engines: Three-cylinder engines are lightweight and compact. Using this type of engine can reduce exhaust emissions and save fuel. The crankshaft of a three-cylinder engine is also shorter, making the engine very compact and lightweight. Using a three-cylinder engine can reduce the overall weight of the vehicle, which helps improve fuel economy.
15
2
Share

What is the actual measured fuel consumption of the Sail 3?

The official combined fuel consumption (L/100km) provided for the Sail 3 is 5.1-5.3L/100km. Additional information is as follows: Appearance: The styling remains consistent with the current model, with the main changes focused on the configuration. The new model will come standard with ABS, EBD, and seat belt warning functions across all variants. Additionally, the high-end models will feature an intelligent connectivity system. Performance: The vehicle adopts a newly developed high-efficiency powertrain system, equipped with a newly developed 1.5L-DVVT engine and a 1.3L-VVT engine, paired with manual and smart start-stop mechanical automatic transmissions. This setup not only delivers efficient power but also achieves excellent fuel economy and easy driving performance. Compared to the previous generation Sail, the Sail 3's power performance has improved by 0.1-0.2, while fuel consumption has significantly decreased, with the lowest combined fuel consumption being only 5.3L per 100 kilometers.
11
2
Share

How many seats does the Honda Jade have?

Honda Jade is a five-seater model. Additional information is as follows: Powertrain: The Honda Jade is equipped with two engines: a 1.8L naturally aspirated engine and a 1.5L turbocharged engine. The 1.8L naturally aspirated engine delivers 141 horsepower and a maximum torque of 174 N·m. This engine reaches its peak torque at 4,300 rpm and its maximum power output at 6,500 rpm. It features Honda's i-VTEC technology. Suspension: The Honda Jade uses a MacPherson strut independent suspension at the front and a double-wishbone independent suspension at the rear. The double-wishbone suspension is an evolution of the double-A-arm suspension, serving as a simplified version where the two A-arms are replaced by two links.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.