What is the body length of the Changan CS15?

1 Answers
DiNorah
07/30/25 9:35am
CS15 body length is 4100mm. The following is extended information about the Changan CS15: 1. Exterior: The front face of the CS15 adopts a design style derived from the CS95 concept car, which is somewhat different from the current Changan SUV series, appearing more rugged and distinctive. 2. Interior: The new car features a black interior style, with red accents on the center console, seats, door panels, and gear shift. 3. Configuration: The new car is also equipped with features such as one-button start, automatic climate control, INCALL 2.0, cruise control, and more.
Was this review help?
12
0
Share
More Forum Discussions

Can Motorcycles Be Purchased with a Loan?

Motorcycles can be purchased with a loan. Here is more relevant information: 1. Loan Conditions: Since purchasing a motorcycle is considered a consumer use, most banks' loan services will support it. As long as you can demonstrate stable employment, considerable income, and good credit—the three key factors—and provide relevant application materials as proof, you can successfully apply for an unsecured loan, obtaining funds approximately 10 times your monthly income. 2. Motorcycles Suitable for Loan Purchase: Unsecured loans are suitable for purchasing mid-to-high-end motorcycles. If you have selected models such as Yamaha YAMAHA, BMW C 650 GT, or Zongshen Piaggio VESPA GTS 250, applying for an unsecured loan is undoubtedly the best choice.
9
3
Share

What is the horsepower of Weichai 4102?

Weichai 4102 has 130 horsepower. It is a diesel engine. The working principle of a diesel engine is different from that of a gasoline engine. Horsepower can also be converted into power, which is a very important technical indicator of an engine, used to measure how much work an object does in a unit of time. Below is a related introduction to Weichai vehicles: 1. Dimensions: The length, width, and height of Weichai vehicles are 4806mm, 1870mm, and 1691mm respectively, with a wheelbase of 2800mm. 2. Power: The vehicle is front-wheel drive, and the engine it is equipped with has a maximum power of 115kw, a maximum torque of 215nm, and a maximum power speed of 5600rpm.
5
3
Share

Is the buzzing sound when turning on the car key a normal phenomenon?

Is the buzzing sound when turning on the car key a normal phenomenon? The buzzing sound when turning on the car key is a normal phenomenon, which is the sound of the fuel pump working. When the key is turned to the ON position, the fuel pump starts working and takes a few seconds to build up sufficient fuel pressure to ensure the fuel injectors function properly and the engine starts smoothly. The correct method to start a car is: 1. Insert the key and hold it in the LOCK position for about 2 seconds; 2. Turn it to the ON position and wait for about 5 seconds for the car's computer to perform a self-check; 3. Turn the key to the START position to ignite, and release the key after the engine starts; 4. Let the car warm up for 30 seconds to about 1 minute; 5. Press the brake, shift to D gear, then release the handbrake and footbrake to start driving.
6
3
Share

How many years ago do cars belong to the yellow-label category?

Yellow-label vehicles refer to gasoline vehicles with emission levels below the National Level I emission standard and diesel vehicles below the National III emission standard. For domestically produced vehicles, those manufactured before 1996 generally fall into the yellow-label category, while imported vehicles manufactured before 1998 are classified as yellow-label vehicles. Starting from 1999, Beijing implemented the National I emission standard for motor vehicles, meaning most vehicles purchased prior to this period are considered yellow-label vehicles. Application process for yellow-label vehicle identification: Vehicle owners must submit their motor vehicle license and the "Motor Vehicle Replacement Subsidy Fund Application Form" (hereinafter referred to as the "Application Form") to the Yellow-label Vehicle Identification Office to apply. The Yellow-label Vehicle Identification Office will arrange specific testing times and locations based on the owner's application, following the principles of centralization and uniformity, and notify the applicant accordingly. Applicants must attend the designated annual inspection line for testing at the scheduled time specified by the Yellow-label Vehicle Identification Office. Only exhaust emission testing fees will be charged, and testing personnel cannot refuse inspection for any reason. Testing personnel will use the exhaust emission testing equipment at the annual inspection line to test the vehicle applying for yellow-label identification, record the data on the Motor Vehicle Pollution Inspection Certificate, and sign the document. Vehicle owners must then submit their motor vehicle license, pollution inspection certificate, and the "Application Form" to the Yellow-label Vehicle Identification Office for verification. The office staff will determine the classification based on the "Motor Vehicle Environmental Protection Inspection Mark Management Regulations." The office staff will note the identification result in the designated section of the "Application Form" and affix the environmental department's review seal. Finally, the Yellow-label Vehicle Identification Office will register and record the identified vehicles.
2
5
Share

How many cylinders does the Honda Envix engine have?

Honda Envix engine has three cylinders. Here is the extended content: Lifespan of three-cylinder and four-cylinder engines: Regarding the lifespan issue, it needs to be clarified that the crankshaft connecting rod mechanism of an engine applies very complex variable forces to the crankshaft during operation, causing the engine to vibrate. This has nothing to do with how many cylinders the engine has. However, the inline four-cylinder engine, because cylinders 1 and 4, and cylinders 2 and 3 move up and down together, to some extent suppresses this vibration, but it still exists. Therefore, four-cylinder engines also incorporate balance shafts. The three cylinders of a three-cylinder engine cannot move up and down together, so the vibration cannot be suppressed and can only be directly countered with balance shafts. Moreover, if you have actually test-driven a three-cylinder car, without being told it's a three-cylinder, you wouldn't notice it's a three-cylinder because you really wouldn't feel particularly obvious vibrations. At most, it shakes a bit more at the moment of startup. Therefore, three-cylinder engines can last as long as the car itself, just like four-cylinder engines. Power comparison between three-cylinder and four-cylinder engines: If comparing power, then four-cylinder engines have to give way to three-cylinder engines, because four-cylinder models have a wider range of applications, while three-cylinder engines are usually used in low-end cars. Moreover, it's only fair to compare three-cylinder engines with turbocharged (T) four-cylinder engines. Otherwise, with one less cylinder, a turbocharged three-cylinder engine would definitely be no match for a turbocharged four-cylinder engine.
6
4
Share

What are the three filters in an engine?

Automotive three filters refer to the air filter, fuel filter, and oil filter. The specific introductions are as follows: 1. Air filter: There are many dust particles suspended in the air, and the main component of these suspended particles is silicon dioxide (Sio2), a substance harder than metal. Installing an air filter can reduce wear on parts such as cylinders, pistons, and piston rings. 2. Oil filter: During the use of an internal combustion engine, mechanical impurities such as dust, metal shavings, and carbon deposits will continuously mix into the oil. At the same time, the oxidation effect of air and combustion exhaust gases on the oil will gradually cause the oil to produce gum. The mixture of mechanical impurities and gum can also form sludge, which not only accelerates the wear of moving parts but also easily causes oil passage blockage. 3. Fuel filter: During the storage, transportation, and refueling process, gasoline is inevitably mixed with some mechanical impurities and water. These impurities enter the fuel supply system and engine cylinders along with the fuel, accelerating cylinder wear.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.