What is the body length of the Buick GL6?

1 Answers
SanAdriel
07/30/25 12:41am
The body length of the Buick GL6 is 4692mm, the width is 1794mm, the height is 1626mm, the wheelbase is 2796mm, and the fuel tank capacity is 45 liters. In terms of appearance, the front face design of the Buick GL6 adopts the new Buick family-style winged chrome grille, with a floating roof, hidden D-pillar, and a unique integrated streamlined window design that extends from the A-pillar to the rear, running through the tail. In terms of power, the Buick GL6 is equipped with a 1.3-liter turbocharged three-cylinder engine across all variants, delivering a maximum power of 120 kW and a maximum torque of 230 Nm. The engine features multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
3
5
Share
More Forum Discussions

What does Y mean on a tire?

Tire Y refers to the speed rating of the tire. The Y indicates that the maximum speed of this tire is 300 km/h. Below is an introduction to tire speed ratings: 1. The tire speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. Different tires will have their speed rating represented by English letters on the sidewall. 2. Additionally, V and W also denote speed ratings, where V indicates a maximum speed of 240 km/h and W indicates a maximum speed of 270 km/h for the tire.
5
4
Share

How to Shift Gears Without Pressing the Clutch?

The method to shift gears without pressing the clutch is: 1. When upshifting, the sequence is to release the throttle, shift out of gear, pause until the engine speed drops, and then engage the higher gear. 2. When downshifting, the sequence is to release the throttle, shift out of gear, rev the throttle to increase engine speed, and then engage the lower gear. The working principle of the clutch is: 1. When the inner race is fixed, the outer race rotates clockwise, and the wedge block does not lock, allowing the outer race to rotate freely. 2. When the outer race rotates counterclockwise, the wedge block locks, preventing the outer race from rotating. The functions of the clutch include: 1. Gradually increasing the driving force of the car to ensure a smooth start. 2. Temporarily separating the engine and transmission for gear shifting. 3. Preventing overload in the transmission system. 4. Reducing torsional vibration and shock from the engine, thereby extending the lifespan of the transmission gears.
6
5
Share

How to Transfer Driver's License Back to Local Area?

To transfer your driver's license back to your original location, you can first go to the traffic management department where your current driver's license is issued to complete the relevant transfer procedures. Then, visit the direct traffic management department in your registered residence area to complete the relevant settlement procedures and payment. Finally, your records will be transferred online. The following conditions and relevant documents must be met for transferring your driver's license back to your original location: 1. The household registration of the motor vehicle driver has been moved into this city, and an application has been made to transfer the motor vehicle driver's license from the original vehicle management office to this city; 2. The motor vehicle driver resides in this city and applies to transfer the motor vehicle driver's license from the issuing vehicle management office to this city; 3. Query the national public security traffic management information system to compare and confirm that the applicant's information and motor vehicle driver's license information are true and valid; 4. The motor vehicle driver does not have a situation where the driver's license has been revoked, withdrawn, or canceled according to law; 5. The cumulative score of the motor vehicle driver has not reached the full mark. 6. Required materials: "Motor Vehicle Driver's License Application Form", identity proof and copy of the motor vehicle driver, original motor vehicle driver's license, digital photo, and if an agent is entrusted, the agent's identity proof and copy must also be provided.
13
5
Share

What does zero-pressure endurance tire mean?

Zero-pressure endurance tires are run-flat tires, also known as air-maintaining tires. More information about zero-pressure endurance tires is as follows: 1. Zero-pressure endurance tires are not puncture-proof, but in the event of a tire blowout, air loss, or zero pressure, the thick inner wall of the tire can still support the car to continue driving at a speed below 80 km/h for a certain distance. 2. If a regular tire experiences a blowout or air leakage, continuing to drive under low or zero pressure can cause severe damage to the tire or wheel hub, whereas zero-pressure endurance tires can effectively handle such incidents. 3. Zero-pressure endurance tires are much more expensive than regular tires, with higher repair costs in the long run. Due to the stiffer sidewalls, they also produce more tire noise, reducing the comfort of the driving experience.
10
0
Share

What is the appropriate eyesight level for a driver's license medical examination?

Here are the eyesight requirements for the driver's license medical examination: 1. For applicants applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, the naked or corrected visual acuity of both eyes must reach 5.0 or above on the logarithmic visual acuity chart; 2. For applicants applying for other types of driving licenses, the naked or corrected visual acuity of both eyes must reach 4.9 or above on the logarithmic visual acuity chart; 3. Additionally, for individuals with monocular vision impairment, if the naked or corrected visual acuity of the right eye reaches 5.0 or above on the logarithmic visual acuity chart and the horizontal field of vision reaches 150 degrees, they may apply for a motor vehicle driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or small automatic transmission passenger cars specially designed for the disabled; 4. Furthermore, individuals taking the driving test must not have red-green color blindness, as red-green color blindness does not meet the requirements for the driving test.
16
3
Share

Are Car Anti-Static Strips Useful?

Car anti-static strips are useful. Here is the relevant information about anti-static strips: 1. During autumn and winter, because the air humidity is relatively low, static electricity cannot be conducted and accumulates on the car body. If an anti-static strip is installed, this situation will not occur. Car static electricity is generated when the car body rubs against dust in a dry environment. When people sit in the car, their clothes inevitably rub against the car's interior, generating static electricity. If the car interior uses more chemical fiber fabrics, it is easier to generate static electricity. The anti-static strip is a device for removing static electricity from vehicles, mainly aimed at conducting static electricity and effectively releasing static electricity to the ground, thereby avoiding the troubles caused by static electricity. 2. Car anti-static strips have the function of removing static electricity and can also emit light at night. In this way, when driving at night, they can warn the cars behind, so that the following cars maintain a safe distance to prevent dangerous accidents.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.