What is the body length of the Audi A3L?

2 Answers
AshlynFitz
07/25/25 12:16am
The length, width, and height dimensions of the Audi A3L are 4554mm/1814mm/1429mm and 4548mm/1814mm/1429mm, which are official data. The length of the Audi A3L refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The turbocharged engine of the Audi A3L has a maximum power of 110kW and a maximum torque of 250 Nm. This engine delivers a maximum horsepower of 150 and a maximum torque speed range of 1750 to 3000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dry dual-clutch transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
Was this review help?
8
2
Share
FinnLee
08/10/25 3:41pm
The body length of the Audi A3L is 4543mm, which is approximately 4.543 meters. This length is considered a sweet spot in the compact luxury sedan segment, slightly longer than the standard A3 but not by much, making it quite agile to drive. I've test-driven it several times, and the rear seating area is noticeably more spacious, with a wheelbase of around 2680mm. It comfortably seats three medium-sized adults in the back without feeling cramped, making it ideal for daily commutes and short weekend trips. Parking is easier compared to larger vehicles, and the turning radius is reasonable, so it handles most city parking garages well, though tight spaces still require caution. It offers good stability at high speeds and effective wind noise control. Overall, the 4543mm length strikes a balance between practicality and driving enjoyment. Before purchasing, it's advisable to measure the width of your usual parking spot to ensure suitability.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How to Open the Fuel Tank Cap of an Old Jetta?

To open the fuel tank cap of an old Jetta, follow these steps: 1. Pry open the metal cover on the outside of the fuel tank cap; 2. Insert the car key into the keyhole of the fuel tank cap; 3. Turn it counterclockwise, then rotate the fuel tank cap counterclockwise to open it. Taking the Jetta 2019 model as an example, it is a 5-door, 5-seat compact SUV with body dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. The Jetta 2019 model is equipped with a 1.4L 4-cylinder turbocharged engine, using direct fuel injection, and is paired with a 5-speed manual transmission.
12
0
Share

How often should refrigerant be added to a car?

Refrigerant in a car should typically be added every 2 to 3 years, and its primary function is to lower the temperature of the air inside the vehicle. Here are methods to determine if your car needs refrigerant: 1. Turn on the air conditioning for a while—if it quickly reaches the set temperature, it indicates normal operation; otherwise, refrigerant may need to be added. 2. Use a thermometer to measure the temperature difference between the air intake and outlet of the indoor unit—if the difference is less than approximately 8 degrees Celsius, refrigerant may need to be added. The steps for adding refrigerant to a car are as follows: 1. Prepare the necessary tools and materials, such as a car refrigerant recovery and filling machine and refrigerant. 2. Connect the hoses of the refrigerant recovery and filling machine to the high and low-pressure pipes of the car's air conditioning system. 3. Perform a vacuum process on the car's air conditioning system. 4. Set the filling capacity, time, and type on the refrigerant recovery and filling machine. 5. The refrigerant recovery and filling machine will then automatically begin adding the refrigerant.
18
4
Share

How Can Beginners Overcome the Fear of Driving?

Methods for beginners to overcome the fear of driving include: 1. Have an experienced driver accompany you; 2. Improve your ability to judge distances; 3. Listen to music while ensuring full concentration on driving to alleviate nervousness; 4. Familiarize yourself with the operation of all vehicle functions; 5. Practice in areas with fewer cars and people; 6. Drive slowly and control your speed. Precautions for beginner drivers are: 1. Slow down and observe left and right when crossing intersections; 2. Reduce speed and check carefully when turning; 3. Maintain a safe driving distance; 4. Avoid occupying two lanes for a long time; 5. Wear glasses if you are nearsighted; 6. Do not drive under the influence of alcohol.
14
1
Share

How Many Layers Does Automotive Paint Consist Of?

Automotive paint consists of 4 layers, which are the electrocoat layer, primer layer, basecoat layer, and clearcoat layer. Methods for maintaining car paint include: 1. Promptly remove snow, rainwater, and other dirt from the car surface to keep the paint clean and aesthetically pleasing; 2. Apply wax to the car body to protect the paint, preventing cracking, corrosion, and rusting; 3. Regularly inspect the car body surface, and promptly repaint any damaged, scratched, or exposed areas; 4. Use specialized detergents and neutral water to wash the car body; 5. Wipe the car body with a soft cloth or sponge to avoid mixing in metal shavings and sand particles. The main paint processes include: 1. Electrocoat: functions to prevent rust and corrosion; 2. Primer: functions to resist UV rays and stone chipping, providing a base for the basecoat; 3. Basecoat layer: functions for aesthetics; 4. Clearcoat layer: functions to give the car body gloss and resistance to stone chipping.
9
1
Share

How to Solve Parking Assist System Malfunction?

Parking assist system malfunctions require inspection and repair at an authorized car 4S dealership. The functions of the parking assist system are: 1. The system measures the parking space and calculates the required distance to park between two vehicles; 2. The control unit uses position sensors installed on the front and rear bumpers to measure the distance of parked vehicles around the parking space; 3. When there is sufficient space for parking, the system emits an audible signal to notify the driver, who can then activate the parking assist system after stopping; 4. During the operation of the parking assist system, the driver does not need to turn the steering wheel; 5. The automatic control system can manage the entire vehicle steering process. If the driver needs to take control, simply turning the steering wheel will automatically deactivate the parking system.
1
3
Share

How to Determine When a Car Battery is Fully Charged?

Methods to determine if a car battery is fully charged include: 1. Using a multimeter to measure the voltage; a reading above 12.5 volts indicates full charge; 2. Observing the ammeter value on the charger or the indicator light on the charger. Methods for maintaining a car battery include: 1. Charging promptly when the ammeter shows insufficient charge; 2. Adjusting the electrolyte density according to standards based on different regions and seasons; 3. Adding distilled water or a specialized replenishing solution when the electrolyte is low; 4. Limiting the total engine start time to no more than 5 seconds each time; 5. Starting the car periodically if the battery is unused for a long time; 6. Regularly checking if the small holes on the battery cover are ventilated; 7. Inspecting the battery's positive and negative terminals for signs of oxidation; 8. Checking all parts of the circuit for any signs of aging or short circuits.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.