What is the BMW rotary button called?

How to Identify the Date on Car Glass?

Here are the methods to identify the date on car glass: 1. The numbers with black dots on the glass indicate the production year and month. The numbers represent the year, which can be determined based on the vehicle's manufacturing date. The black dots represent the month. If the dots are in front of the number, subtract the number of dots from 7; if they are behind the number, subtract from 13 to get the month. 2. Some glass may also have a few thick black dots after the production year and month, which indicate the specific week of the month. Below is an extended introduction to car glass: 1. In addition to the production date, car glass codes also identify the car manufacturer, glass brand, national certification codes, etc. 2. Car glass is an essential part of the vehicle's body accessories, primarily serving a protective function. 3. There are mainly three types of car glass: laminated glass, tempered glass, and zone-tempered glass, all of which can withstand strong impacts. 4. Car glass can be categorized by its location into four types: windshield, side window glass, rear windshield, and sunroof glass.

20

3

Share

What is the normal mileage range for a brand-new car upon delivery?

For a brand-new car, a mileage within 100 kilometers is considered normal. After rolling off the production line, the vehicle needs to be driven, and during transportation, it also covers some distance. Therefore, an odometer reading of 0-100 kilometers falls within the acceptable range, and from a mileage perspective alone, you can confidently take delivery. Below are some key considerations when picking up your new car: 1. Verify vehicle information: Every car comes with a manufacturer's plate that provides essential details about the vehicle, particularly the production date. Checking this plate helps avoid purchasing an overstocked vehicle. 2. Inspect the interior: The interior inspection focuses on the functionality of physical buttons and the overall condition of the cabin. Pull back the seats to check for any signs of rust and examine the seat belts for indications of replacement.

20

0

Share

What is the wheel size of the Lynk & Co 03?

The wheel size of the Lynk & Co 03 is 225/45-R18. It is equipped with an 18-inch multi-spoke matte alloy wheel, with a tire thickness of 101mm and a tire width of 225mm. The number 225 represents the tire's section width of 225mm; 45 represents the tire's aspect ratio; R stands for radial tire; 18 indicates the rim diameter of 18 inches. In addition to the model, the tire also carries the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F. Early cars did not have wheel hubs but used a simple double-bearing module with nearly solid tires. Solid tires performed poorly in terms of both performance and driving comfort. This led to the development of wheel hubs and tires working together, where the tires bear the flexible pressure of direct contact with the road and the vehicle's driving inertia, while the sturdy wheel hubs bear the rigid inertial pressure.

17

4

Share

How Often Should the Brake Pads on a Nissan Qashqai Be Replaced?

Nissan Qashqai brake pads should be replaced every 30,000 to 50,000 kilometers. Automotive brake pads, also known as brake linings, are friction materials fixed on the brake drums or discs that rotate with the wheels. The friction linings and blocks bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. The method for replacing brake pads is as follows: 1. Before replacing the brake pads, open the cap of the brake fluid reservoir in the engine compartment and check the brake fluid level. If the brake fluid level is above the maximum limit, some brake fluid should be siphoned out to prevent overflow during the replacement process. 2. Prepare the new brake pads to be installed and remove the wheel where the brake is located. 3. Use a wrench and socket to remove the bolts of the brake caliper, then take out the old brake pads. 4. Since the brake caliper may accumulate a lot of sand or dirt, clean it thoroughly with a cloth and apply anti-squeal paste to prevent noise during braking. 5. Use a piston press to push the piston to its limit, then install the new brake pads onto the caliper. Once the new brake pads are properly installed, tighten the guide bolts to complete the installation. 6. After installation, securely close the reservoir cap, get into the car, and press the brake pedal firmly several times to reset the brake. Then, check the brake fluid level to ensure it is within the appropriate range. 7. After replacement, conduct a test drive to check whether the braking effect is achieved.

12

5

Share

How Many Colors Are Available for the 2019 Camry?

2019 Camry offers 6 color options, which are: Crystal Black, Platinum White Pearl, Opulent Silver, Amber Brown, Ruby Red, and Deep Sea Blue. Relevant details are as follows: 1. The 2019 Camry is a mid-size sedan under GAC Toyota, with body dimensions of 4885mm in length, 1840mm in width, and 1455mm in height, a wheelbase of 2825mm, a fuel tank capacity of 60 liters, and a trunk capacity of 620 liters. 2. The 2019 Camry Luxury Edition is equipped with a 2.5L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 209 HP, a maximum power of 154 kW, and a maximum power speed of 6600 RPM.

14

0

Share

What is the fuel tank capacity of the Volvo XC60?

The fuel tank capacity of the Volvo XC60 is 70 liters. The fuel tank is a specialized container in the hydraulic system used for storing hydraulic oil or hydraulic fluid, categorized into open-type and closed-type tanks. Below are the relevant details about the Volvo XC60: 1. The Volvo XC60 is a mid-size SUV under Volvo Asia Pacific, with exterior dimensions of 4688 mm in length, 1902 mm in width, and 1658 mm in height, and a wheelbase of 2865 mm. 2. The Volvo XC60 is equipped with a 2.0T 190-horsepower L4 engine, delivering a maximum power of 140 kW and a maximum torque of 300 N·m. It features a double-wishbone independent front suspension and a multi-link independent rear suspension.

18

2

Share

What is the BMW rotary button called?

How to Identify the Date on Car Glass?

What is the normal mileage range for a brand-new car upon delivery?

What is the wheel size of the Lynk & Co 03?

How Often Should the Brake Pads on a Nissan Qashqai Be Replaced?

How Many Colors Are Available for the 2019 Camry?

What is the fuel tank capacity of the Volvo XC60?

Where is the air conditioning switch in Buick?

How Much Is Half a Turn of the Steering Wheel?

What does it mean when the cumulative score on 12123 is zero?

How to Remove the Wrench Icon on the Bora Dashboard?