What is the BMW EGS module?

What engine is used in the Lifan X60?

The engine of the Lifan X60 is a Chinese-made engine, produced independently by Lifan Engine Company. The engine model equipped in the Lifan X60 is the LFB479Q, with a maximum power of 98 kW, a maximum torque of 168 N·m, and a maximum horsepower of 133. For daily maintenance of the Lifan X60 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates from the oil, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

4

0

Share

Is it necessary to enable the motion detection function of a dash cam?

The motion detection function of a dash cam is usually automatically activated after parking. It is recommended not to enable it while driving to avoid unnecessary interference. Below is a relevant introduction to dash cams: 1. Purpose of motion detection: Translated as "Motion detection technology" in English, it is also commonly referred to as motion sensing, often used in unattended surveillance recording and automatic alarms. 2. Advantages of motion detection: It serves as a monitoring tool when the vehicle is parked, typically used to record activities such as vehicle theft, malicious scratching, or fraud attempts.

18

3

Share

How to Remove the Drive Shaft of a Ford Mondeo?

Ford Mondeo drive shaft removal method is as follows: 1. First, unscrew the 4 bolts on the universal joint fork connected to the drive axle and remove the rear end of the main drive shaft; 2. Unscrew the 4 bolts on the universal joint fork connected to the intermediate drive shaft; 3. Remove the front end, so the entire main drive shaft can be taken off; 4. Loosen the connecting bolts between the intermediate support and the frame crossbeam, and remove the end with the intermediate support; 5. Finally, loosen the nut connected to the parking brake drum; 6. Follow the above steps to remove the intermediate drive shaft.

11

2

Share

How to Use Mercedes-Benz Seat Adjustment Buttons?

Mercedes-Benz seat adjustment button tutorial: 1. Press the vehicle's one-touch start button to power up the entire car. 2. Locate the seat adjustment and memory function on the door. 3. The buttons can adjust the seat headrest, backrest, cushion, and foot support. 4. After adjusting the seat position, press the M button to record the seat position. 5. Press any one of the three numbers 1, 2, or 3 to save this adjustment to the pressed number. 6. To use a previous seat setting later, simply press the corresponding number, and the seat will automatically adjust to the preset position.

4

1

Share

Is Leaving After Scratching a Car Considered Hit-and-Run?

Fleeing after a scratch constitutes property damage hit-and-run. Here are the proper steps to take if you accidentally scratch someone else's car: 1. Call the traffic police: Report the location and circumstances of the incident, requesting officers to arrive promptly. 2. Take photos as evidence: Use your phone to photograph both vehicles together, ensuring license plates are clearly visible. After documenting the scene, move the cars to a safe location to await police arrival or proceed to a rapid traffic processing center. 3. Contact your insurance company: If insurance coverage is needed, notify your insurer who will handle the claim based on the accident details.

14

0

Share

Is it no longer necessary to display the compulsory insurance label on the vehicle?

In most regions, it is no longer required to display the compulsory insurance label on the vehicle. Here are the reasons why most areas no longer require the compulsory insurance label: 1. Paper policies are no longer provided: Insurance companies no longer issue paper policies or compulsory insurance labels. Instead, they provide electronic policies and electronic compulsory insurance labels. 2. Information can be checked via a shared information platform: By entering the license plate number and corresponding policy, the information can be retrieved. Therefore, it is no longer mandatory to display the compulsory insurance label. If stopped by traffic police, drivers can simply present the electronic policy for verification.

3

1

Share

What is the BMW EGS module?

What engine is used in the Lifan X60?

Is it necessary to enable the motion detection function of a dash cam?

How to Remove the Drive Shaft of a Ford Mondeo?

How to Use Mercedes-Benz Seat Adjustment Buttons?

Is Leaving After Scratching a Car Considered Hit-and-Run?

Is it no longer necessary to display the compulsory insurance label on the vehicle?

What engine does the KAROQ have?

What is the method to reset the maintenance light on the Trumpchi GM8?

How to Replace Brake Fluid for Audi Q5?

What Octane Gasoline Should Nissan Sylphy Use?