What is the best tire pressure for SUV cars?

1 Answers
SamuelAnn
07/29/25 4:59pm
SUV cars perform best with a tire pressure between 2.1~2.5. Different models have varying weights and tire specifications, which may result in different pressure requirements for front and rear tires. It is also advisable to follow the standard air pressure value specified in the manual. This standard pressure is usually indicated on a sticker located on the fuel tank cap or the B-pillar when the door is opened. Locate this standard pressure value for accurate inflation. Below are the effects of low tire pressure: 1. It increases the contact area between the tire and the ground, making the steering wheel heavier and affecting driving. 2. The tire is more prone to overheating, increasing the risk of a blowout. 3. It causes the tire body to expand, leading to cracks on the inner and outer sides of the tire, accelerating rubber aging and increasing tire wear. Below are methods to check tire pressure: 1. Use a tire pressure gauge. 2. Visual inspection method. 3. Consult 4S staff.
Was this review help?
9
1
Share
More Forum Discussions

What is the 0-100 km/h acceleration time of the Audi A3?

The 0-100 km/h acceleration time of the Audi A3 ranges from 7.7 to 9.5 seconds. The Audi A3 is a compact car under the Audi brand, available in both hatchback and sedan versions. There is also a high-performance version of the Audi A3, known as the S3. The front suspension of the Audi A3 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The five-door hatchback version of the Audi A3 has body dimensions of 4292mm in length, 1765mm in width, and 1423mm in height, with a wheelbase of 2578mm. The Audi A3 has undergone some detailed adjustments in its exterior design, featuring chrome accents on the air intakes and black reflective materials on the B-pillar.
17
1
Share

Why does the car fail to accelerate when pressing the gas pedal?

Here are the possible reasons why a car fails to accelerate when pressing the gas pedal: 1. Clutch slipping. The symptom of clutch slipping is that when you press the gas pedal hard, the engine speed increases rapidly, but the vehicle speed does not increase. 2. Poor fuel quality. Using low-quality fuel can affect the gasoline filter and fuel lines, potentially causing poor fuel supply and resulting in weak acceleration. 3. Throttle valve carbon buildup. Carbon deposits accumulating on the throttle valve can affect the air intake volume. 4. The car has a small displacement and is carrying too much weight. 5. Any component failure or abnormality in the engine's intake, fuel system, or ignition system. 6. ECU control unit failure. When the ECU fails, it will switch to the backup electronic control unit and enter limp mode.
11
1
Share

How to Turn on the Air Conditioning in Qoros 5?

To turn on the air conditioning in Qoros 5, follow these steps: Press the AC button to start the cooling function, then adjust the temperature and fan speed accordingly. Here is some additional information: 1. The Qoros 5 offers two air conditioning adjustment modes: automatic and manual, with some models featuring dual-zone climate control. 2. Upon entering the car, if the interior temperature feels too high, it is advisable to first open the windows for ventilation. This allows the flow of outside air to help reduce the interior temperature before turning on the air conditioning for cooling. 3. Hot air rises while cold air sinks. During summer, after turning on the cooling function, adjusting the air vents to face upwards can save energy and improve cooling efficiency.
8
5
Share

Is it necessary to replace a broken taillight cover?

It is necessary to replace a broken taillight cover. Here is some additional information: 1. Classification of taillight cover damage: Replacement can be divided into replacing only the cover or the entire unit. Car light covers are generally made of plastic, and some lights are integrated units where the cover cannot be replaced separately, requiring the entire light to be replaced. Some taillight covers are not integrated, allowing for the cover to be replaced individually if damaged. 2. Partial introduction to the lighting system: The lighting system is crucial for vehicles, as cars have many important lights such as brake lights and turn signals. Typically, a car has two brake lights, one on each side, and some vehicles also feature a high-mounted brake light on the rear windshield. If a light is damaged, it is recommended that the owner repairs it immediately. Failure to do so can compromise driving safety.
14
5
Share

Which car models are equipped with rotary engines?

Car models equipped with rotary engines include the Mazda RX7 and Mazda RX8. Characteristics of rotary engines: Rotary engines eliminate the reciprocating motion effect of pistons in traditional engine cylinders, directly converting the combustion expansion force of fuel and mixed gases into driving torque. Therefore, in terms of size, rotary engines are smaller than traditional engines. Additionally, rotary engines feature a low center of gravity and lightweight design, which can enhance vehicle handling to some extent. Disadvantages of rotary engines: Rotary engines have relatively high fuel consumption, primarily because the shape of the combustion chamber is not conducive to complete combustion, and the flame propagation path is longer, leading to increased consumption of fuel and engine oil. Moreover, rotary engines can only use spark ignition and cannot employ compression ignition, meaning they cannot use diesel fuel. Additionally, they have high requirements for manufacturing processes and costs.
2
1
Share

How many types are steering systems classified by energy source?

Automotive steering systems are classified into two types based on the source of steering energy: mechanical steering systems and power steering systems. Introduction to mechanical steering systems: Mechanical steering systems use the driver's physical strength as the steering energy source, hence they are also called manual steering systems. They consist of three main components: the steering control mechanism, the steering gear, and the steering linkage. The steering gear is typically fixed to the vehicle frame or body, and the steering force usually changes direction after passing through the steering gear. Introduction to power steering systems: Power steering systems convert part of the engine's mechanical energy into pressure energy (hydraulic or pneumatic energy). Under the driver's control, this system applies hydraulic or pneumatic forces in different directions to the steering linkage or a specific component in the steering gear to reduce the driver's steering effort. This system is called a power steering system.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.