What is the best position to adjust the car rearview mirrors?

2 Answers
ArcherRose
07/24/25 2:27am
The left rearview mirror of the car should be adjusted to a position where the front and rear door handles and the wheel arches of the rear wheels are visible; the right rearview mirror should be adjusted to the same position. The interior rearview mirror should be kept in the center of the rear window to ensure driving safety. Car rearview mirrors are located on both sides of the car's front and inside the car, reflecting the situation behind, beside, and below the vehicle, allowing the driver to indirectly see these areas. They serve as the "second pair of eyes," expanding the driver's field of vision. Car rearview mirrors are important safety components, with careful consideration given to their mirrors, shapes, and operation. The quality and installation of rearview mirrors are subject to corresponding industry standards and should not be adjusted arbitrarily.
Was this review help?
13
1
Share
LeAlan
08/10/25 10:01pm
As an experienced driver, I have my own standards for adjusting rearview mirrors: First, adjust the driver's seat to a comfortable position, then sit upright and start adjusting. The left rearview mirror should have the horizon in the middle, allowing a clear view of vehicles behind and the road conditions. Only a quarter of the car body should be visible in the mirror—any more would obstruct the view. The right rearview mirror should have the horizon positioned higher, occupying two-thirds of the mirror, as the right side has a larger blind spot. The interior center rearview mirror should be aligned straight to ensure a full view of the rear windshield. After adjustment, always verify: while maintaining a normal sitting posture, when a car passes in the adjacent lane, it should appear in the rearview mirror the moment it disappears from the side window. Before high-speed driving, I always double-check, as visibility is crucial for driving safety.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Common Faults of Changan Benben Automatic Transmission?

Changan Benben transmission failure may be caused by insufficient transmission oil or transmission oil leakage due to aging seals and poor sealing, or it could be due to transmission malfunction. Here are specific details about the transmission: 1. Structure: The internal control mechanism of an automatic transmission is very precise with small matching clearances, so it has high requirements for oil quality and must be kept clean. Over time, transmission oil can develop sludge and deposits, increasing wear on friction plates and components, which affects power transmission. 2. Maintenance Interval: Automatic transmission oil should generally be replaced every two years or 40,000 to 60,000 kilometers. After draining the old transmission oil, new automatic transmission oil should be added.
14
4
Share

Can a Small Spoiler Pass the Annual Vehicle Inspection?

Installing a small spoiler cannot normally pass the annual vehicle inspection. Modifications such as adding spoilers, extensive body kits, or altering the exhaust system are generally not permitted. During the annual inspection, the vehicle is checked for any modifications, alterations, or transformations. The inspection verifies whether the vehicle's registration details, license plate, and vehicle records match the actual condition of the car and if any changes have been made, including whether the necessary approval and modification procedures have been completed. The vehicle must regularly pass emissions testing, as well as inspections for exterior appearance, lights, brakes, and chassis, and must have no outstanding traffic violations to receive the inspection compliance sticker. Any unresolved traffic violations in the vehicle's usage location must be addressed beforehand.
4
5
Share

To what extent does tire sidewall damage require replacement?

Tire sidewall damage, if it leads to broken carcass cords, can cause bulging hazards, necessitating prompt replacement of the tire. Tire replacement indicators: 1. Tire wear: Tires have tread wear indicators; if the tread rubber blocks wear down to the same level as these raised markers, the tire should be replaced immediately. 2. Tire damage: Hitting curbs, falling into potholes, or punctures from nails can severely damage tires. Only professional repair shops can accurately determine whether a tire can be repaired or needs replacement. 3. Tire aging: If tread deformation or significant cracking is observed, stop using these tires immediately. 4. Tire bulging: Bulging is a major cause of tire blowouts, especially dangerous on highways. Tires with bulges should be replaced promptly.
6
4
Share

What does EF mean on a car fuel tank?

EF on a car fuel tank represents the remaining fuel level, where E stands for Empty, indicating that the fuel in the tank is insufficient or about to run out; F stands for Full, meaning the tank is at full capacity. When fuel is low, the refueling indicator light will turn yellow; in cases of extremely low fuel, the indicator will turn red. Effects of low fuel level: 1. When the fuel in the tank is too low, the car may experience fuel supply issues, leading to engine shaking, jerking, or stalling; 2. The fuel pump may overheat; 3. With low fuel, impurities at the bottom of the tank can enter the fuel supply system due to fuel agitation, causing fuel line blockages; 4. It affects driving safety.
8
0
Share

What Lights to Use When Driving at Night with Flickering Light Conditions?

Nighttime driving light usage: When driving at night at speeds below 30 km/h, low beam headlights should be used. Under normal conditions, these lights can illuminate the road up to 30 meters ahead. When approaching an intersection, slow down 50 to 100 meters before reaching it, switch from high beams to low beams, and activate the turn signal to indicate your direction. Here are additional considerations: Important notes: When meeting oncoming traffic, promptly switch back to low beams to avoid dazzling the other driver with glaring high beams, thereby minimizing visual interference for oncoming motorists. If a vehicle experiences sudden malfunctions, accidents, or needs to pull over during nighttime driving, or when towing a disabled vehicle—whether as the towing or towed vehicle—the hazard warning flashers should be activated immediately.
12
1
Share

Why is Porsche called 'Bozi'?

Porsche is called 'Bozi' due to the pronunciation of its Chinese translation (Porsche, also known as 'Borshe'). Below is an introduction to Porsche: 1. Overview: Porsche (Porsche, also known as 'Borshe') is a luxury car brand under the German Volkswagen Group, representing one of the main European and American automobile manufacturers, established in 1931 in Stuttgart, Germany. 2. History: Porsche is renowned for manufacturing sports cars and participating in motorsports, ranking as one of the world's top three sports car manufacturers, alongside Italy's Ferrari and Britain's Lotus Cars. 3. Development: On July 19, 2021, influenced by the Kris Wu and Meizhu Du incident, Porsche announced via Weibo that Porsche China decided to terminate its cooperation with Kris Wu as the 'Porsche China Motorsport Ambassador' effective immediately.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.