What is the best engine oil for Roewe RX5?

2 Answers
SanKiara
07/29/25 4:09pm
The best engine oil for Roewe RX5 is the original 5W-30 fully synthetic oil, and 5L is required for an oil change. The following are the types of engine oil: 1. Conventional mineral oil. 2. Semi-synthetic oil. 3. Fully synthetic oil. Below is extended information on the method of changing engine oil: 1. Lift the vehicle with a jack. 2. Drain the old oil. 3. Remove the oil filter. 4. Install the new oil filter and add new oil. Below is extended information on the functions of engine oil: 1. Separate the surfaces of relatively sliding parts to reduce wear. 2. Bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine. 3. Circulate carbon deposits, sludge, and wear particles from engine parts back to the oil tank, and flush dirt generated on the working surfaces of parts through the flow of lubricating oil.
Was this review help?
2
4
Share
StEdward
08/15/25 4:36am
After driving a Roewe RX5 for several years, I highly recommend using full synthetic 5W-30 engine oil as it performs well in various weather conditions, ensures quick starts in winter without harming the engine. I frequently take long-distance trips, and with this choice, the car runs exceptionally smooth with reduced engine noise. Remember to check your vehicle's user manual—it might specify similar viscosity grades. I prefer brands like Shell or Castrol; they're slightly pricier but worth it. Avoid cheap mineral oils as they cause more carbon buildup over time, affecting performance. Also, oil change intervals are crucial—typically every 5,000 kilometers to keep the car feeling fresh.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the emission standard for cars in 2006?

2006 cars could meet either China II or China III emission standards. Here are the relevant details: 1. China II: The abbreviation for the National Phase II emission standard, equivalent to Euro II standards, meaning the exhaust pollutant levels match Euro II requirements. 2. Regulation: According to the State Environmental Protection Administration's "Announcement on Implementing National Phase II Motor Vehicle Emission Standards," starting from September 1, 2003, all newly designed heavy-duty vehicles were required to comply with National Phase II type-approval emission limits equivalent to Euro 2 standards.
13
4
Share

What does the hold button in the car mean?

The hold button on the vehicle means hold. After pressing the hold button, the automatic transmission is in hold mode, and the hold mode indicator light on the dashboard lights up. The hold button adjusts the optimal driving state according to different driving conditions, effectively preventing the transmission from shifting frequently, and plays the role of forced downshifting and not upshifting when overtaking. The situations for using the hold button are: 1. When starting on snow, place the gear lever in the 2nd gear position and press the hold button, the transmission will maintain the gear ratio at 2nd gear, making the start smoother; 2. When driving on continuous curves, press the hold button in D4 gear, the transmission will maintain 3rd gear, which can continuously output greater torque, improve acceleration performance, and make driving smoother; 3. When driving on mountain roads or continuous slopes, press the hold button in D4 or 2nd gear to enter hold mode, making acceleration more powerful when going uphill and providing greater resistance and safety when going downhill, avoiding wear caused by frequent shifting of the transmission.
20
3
Share

How Long to Wait Before Rescheduling After Failing Subject 3

Subject 3 exam retakes can be scheduled 10 days after a failed attempt. Below are key details about Subject 3 testing: 1. Test components: Vehicle preparation, lighting simulation test, starting off, straight-line driving, gear shifting operations, lane changing, roadside parking, proceeding straight through intersections, left/right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, oncoming vehicle handling, overtaking, U-turns, and nighttime driving. 2. Retake policy: According to China's driver's license regulations, candidates have five total attempts for Subject 3. Failure to pass after five attempts invalidates all previous test results, requiring complete re-registration starting from Subject 1.
4
0
Share

Is Wheel Alignment Necessary When Replacing Shock Absorbers?

Replacing shock absorbers does not require a wheel alignment. Here are the reasons why wheel alignment is unnecessary when replacing shock absorbers: 1. Limitations of Wheel Alignment: The front wheels in a wheel alignment can generally only adjust the front wheel toe-in, while parameters such as caster angle, kingpin inclination, and front wheel camber are typically set at the factory and cannot be adjusted afterward. 2. Self-Adjustment Capability of Shock Absorbers: When replacing shock absorbers, the entire connection between the vehicle's front suspension and the wheel hub needs to be disassembled. However, the length of the tie rod, which affects the front wheel toe-in, remains unchanged. After replacing the shock absorbers and reinstalling the tie rod, its relative position will return to its original state.
3
4
Share

Which is More Fuel-Efficient, Cars with T or Without T?

Cars with T naturally represent better fuel efficiency. Here are some measures to improve fuel efficiency: 1. Control RPM: While driving, the optimal engine RPM for most fuel-injected cars is around 2200–2500. Regardless of the gear, maintain the engine RPM within this range. Too low RPM will make the car sluggish, consume fuel without moving, and damage the engine; too high RPM increases unnecessary fuel consumption and also harms the engine. 2. Maintain Speed: The most fuel-efficient driving condition is maintaining a constant speed in a straight line. The most fuel-efficient speed for small-displacement cars is 60–80 km/h, while for medium-displacement cars, it is 80–100 km/h. Driving at the economic speed ensures the best fuel efficiency.
15
3
Share

What happens if you drive on the highway without a driver's license?

The Article 95 of the Road Traffic Safety Law stipulates: If you forget to bring your driver's license on the highway, according to the road traffic law, you will be deducted 1 point on your license and fined. To avoid this situation, before driving on the highway, be sure to check various conditions of your car. Below are the basic checks before driving on the highway: 1. Check if the windshield washer fluid is depleted and if the wipers are functioning properly; 2. Ensure the brakes, handbrake are reliable, the brake fluid is normal, and the spare tire's pressure is correct; 3. Inspect the tires for nails and use a tire pressure gauge to test the tire pressure.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.