···
Log in / Register

What is the best engine oil for Chery Arrizo 5 car maintenance?

3 Answers
DeAva
09/06/25 8:04am
Chery Arrizo 5 car maintenance is better with fully synthetic 5W30 engine oil. For models with turbocharged engines, when the turbocharger starts working, the engine torque will multiply. At this time, the oil film attached to the engine components must withstand several times more shear force than before. High-quality fully synthetic engine oil can fully meet the requirements of the oil film. In terms of power, the engine equipped in the Chery Arrizo 5 has a maximum torque of 143 Nm and a top speed of 180 kilometers per hour. It is equipped with body stability control, brake assist, tire pressure monitoring, automatic door locking while driving, and rear radar.
Was this review help?
7
1
Share
DelAlivia
09/18/25 7:40am
I've been using the Chery Arrizo 5 for over two years and found that 5W-30 full synthetic oil is the most reliable choice for maintenance. Synthetic oils like Shell Helix 5W-30 provide excellent high-temperature protection for the engine, making them particularly suitable for most regional climates. In my area, where summers are hot and winters are cold, the 5W-30 viscosity is just right—quick starts without sluggishness. The Arrizo 5's engine recommends API SN-grade oil, and synthetic oil does a better job cleaning the internals and extending engine life. Don’t cheap out with mineral oil; it tends to cause carbon buildup and increased wear. I change the oil every 7,000 kilometers, and the mechanics at the shop always recommend full synthetic. Using the wrong viscosity, like 10W-40, can increase fuel consumption and make the engine noisier—definitely not worth it. My advice is to follow the manual and choose a reputable brand like Mobil or domestic Great Wall, ensuring regular maintenance for long-lasting performance.
Was this review help?
17
5
Share
Expand All
SanStephanie
11/01/25 8:06am
I usually commute with my Chery Arrizo 5, and when it comes to engine oil, I opt for economical and practical options. Synthetic oil is good but too expensive, while 5W-30 semi-synthetic does the job at a moderate price, costing just a few hundred yuan. Check the manual for recommended oil specifications like API SN or SP, but don’t overlook seasonal adjustments—using 5W-30 in summer and switching to 0W-20 in winter saves fuel. I buy domestic brands like Kunlun 5W-30 from roadside shops and always test the viscosity during each maintenance to ensure it doesn’t exceed limits. Wrong oil choices can harm the car, such as high-viscosity oil slowing acceleration and increasing fuel consumption, wasting money. Stick to widely recognized brands for better protection, and change the oil regularly—never exceed 8,000 kilometers—that’s the key.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What does a black smoke vehicle mean?

A black smoke vehicle refers to a motor vehicle that emits clearly visible smoke or has a smoke density exceeding Ringelmann Level 1, including both locally and non-locally registered vehicles. Specific information about black smoke vehicles is as follows: 1. Restricted areas: According to documents released by the three cities, black smoke vehicles are prohibited throughout the entire administrative regions of Guangzhou and Jiangmen. Qingyuan City has designated specific restricted routes; 2. Enforcement: The main methods for detecting black smoke vehicles violating the restrictions are on-site testing and electronic monitoring; 3. Penalties: After the policy is officially implemented, vehicles violating the restrictions will be penalized by the traffic management department of the public security authorities, with fines and 3 penalty points recorded.
17
0
Share

Is it a violation if you don't honk when turning?

Not honking when turning is considered a violation. Here is an introduction about car horns: 1. Introduction: The horn is the audio signal device of a car. During driving, the driver emits necessary audio signals as required by regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. 2. Usage Notes: (1) When washing the car, be sure to prevent the horn from getting wet. If water enters the horn, use an air gun to dry it as soon as possible. (2) Try to avoid pressing the horn for extended periods frequently, as this can cause premature burning of the horn contacts. (3) If the horn malfunctions, seek help from a professional repair technician. Do not blindly replace the horn to avoid unnecessary waste.
4
5
Share

What are the speed limit details for each section of the Erguang Expressway?

Erguang Expressway interchange with Hanyi Expressway, and Fuyin Xiangyang interchange on Erguang Expressway. Here are the specific details: 1. Speed: Expressways should indicate the driving speed of lanes, with the maximum speed not exceeding 120 km/h and the minimum speed not less than 60 km/h. 2. Speed limit signs: If there are 2 lanes in the same direction, the minimum speed of the left lane is 100 km/h; if there are 3 or more lanes in the same direction, the minimum speed of the leftmost lane is 110 km/h, and the minimum speed of the middle lane is 90 km/h. If the speed indicated by the road speed limit signs is inconsistent with the above lane speed regulations, drive according to the speed indicated by the road speed limit signs.
17
5
Share

Should a Deformed Trunk Lid Be Replaced or Repaired?

For a trunk lid with minor deformation, it can be repaired through metal panel shaping. However, if the deformation is severe, complete cutting and replacement are necessary. Below is relevant information on car maintenance: 1. Exterior Inspection: Before driving, check the doors, hood, trunk, and glass condition. Inspect for any body damage, tilting, oil or water leaks, etc. 2. Engine and Various Fluids: Check the fastening condition of engine components and inspect for oil or water leaks at engine joints. Adjust and tighten belts as needed, and inspect the securing of hoses and wiring. Top up engine oil, coolant, and electrolyte as required. 3. Tires: Examine tire wear and clean the trunk. Replace tires when they approach the wear indicators. Check for bulges, abnormal wear, aging cracks, or other damage.
12
0
Share

How many times does the turn signal flash in three seconds?

Turn signals flash approximately every 0.5 seconds, so they will flash 6 times in 3 seconds. Below are precautions to take when turning a car: 1. Steering wheel: When turning, adjust the steering wheel according to the road curvature and driving speed, ensuring appropriate steering angle, timing, and timely correction. Never remove both hands from the steering wheel to avoid losing control and causing danger. 2. Speed: Reduce speed when turning and avoid sudden steering to prevent excessive centrifugal force that may lead to skidding. If the car skids, immediately release the accelerator pedal and steer the wheel toward the direction of the skid. Once the car regains stability, straighten the steering wheel and continue driving. 3. Brakes: Avoid using the brakes during turns, especially emergency braking, to prevent skidding or accidents.
13
4
Share

Should the clutch be released quickly when shifting gears?

When shifting at low gears, the clutch should be released slowly, while at high gears, the clutch can be released a bit faster. The techniques for slow and fast clutch release during gear shifting are as follows: 1. As the vehicle speed increases, the clutch can be released more quickly when shifting. 2. After shifting to the second gear or higher, whether the clutch can be released quickly depends on whether the current vehicle speed has exceeded the idle speed upper limit of that gear. 3. If the speed is below the idle speed upper limit of that gear, releasing the clutch quickly may cause the vehicle to jerk forward. Although the engine won't stall at a certain speed, the car will become unstable. 4. If both the vehicle speed and engine speed are sufficient, the clutch pedal can be pressed and released quickly, avoiding the semi-engaged state, otherwise, it will accelerate clutch wear. Additionally, when pressing and releasing the clutch pedal, pay attention to coordinating with the throttle.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.