What is the best engine oil for Chery Arrizo 5?

2 Answers
Pires
07/25/25 3:03am
Arrizo 5 originally uses SM grade 10W-40 engine oil. If the temperature in your area is relatively low, you should switch to 5W-40 grade engine oil. Below is an introduction to the engine oil for Arrizo 5: 1. 10W40 refers to the SAE standard viscosity value, which indicates that this oil is a multi-grade oil. 2. W stands for WINTER. The number before W represents the oil's flow performance at low temperatures. The smaller the number, the better the starting performance at low temperatures. The number after W represents the oil's stability at high temperatures. The larger the number, the better the oil's stability at high temperatures. 3. The smaller the number before W, the lower the oil's viscosity at low temperatures, the better its low-temperature fluidity, and the lower the minimum applicable temperature.
Was this review help?
9
5
Share
AlexDella
08/10/25 4:50pm
I've been driving a Chery Arrizo 5 for several years, and experience has taught me that oil selection is crucial. The manual usually recommends synthetic oils like 5W-30 or 5W-40, with brands such as Shell and Mobil offering high stability. Climate affects viscosity preference—using 5W-40 in hot summers provides better protection, while 5W-30 offers more timely lubrication in cold winters. Remember not to skimp on quality by buying inferior oil, as it accelerates engine wear and increases fuel consumption. Personally, I change the oil every 5,000 kilometers and check the oil level regularly, which extends engine life and saves on repair costs. Driving habits also matter; if you frequently drive on highways, fully synthetic oil lasts longer and is safer. Developing good habits means fewer car troubles and smoother driving.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

Can I Take the Subject 3 Test Without an ID Card?

You cannot take the Subject 3 test without an ID card. For Subject 3, you must personally bring your ID card to participate in the exam. Related information: 1. Introduction: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies for different permitted driving models. 2. Expansion: The road driving skills test for Subject 3 generally includes: preparation before getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears up and down, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.
3
3
Share

Why does the Haval H6 fail to accelerate and gain power?

Reasons why the Haval H6 fails to accelerate and gain power: clutch slippage and engine intake system failure. Detailed explanations of the reasons are as follows: Clutch slippage: The main cause of clutch slippage is insufficient friction on the clutch friction plate; shifting gears too early or disengaging gears before the clutch is fully engaged; driving for extended periods with the clutch partially engaged or coasting with the clutch depressed; shifting or disengaging gears incompletely, and suddenly applying throttle when the gear is not fully engaged or disengaged, leading to abnormal wear of the clutch plate. Engine intake system failure: In addition to fuel, the engine requires air. If components such as the air filter or throttle valve are clogged or malfunctioning, resulting in insufficient air intake, it can also cause the vehicle to accelerate weakly and slowly, accompanied by a jerking sensation.
13
2
Share

Reasons for the Ban of Mazda's Rotary Engine in Racing?

Mazda's engine was banned from racing, and here is a detailed analysis of the reasons: 1. Internal Structure: Mazda eliminated the piston design inside the engine and instead adopted a triangular rotor to generate power through rotation, hence the name rotary engine. The rotary engine can continuously deliver more powerful output than piston engines, while also saving considerable internal space and being more fuel-efficient than traditional engines. 2. Movement Characteristics: The movement characteristics of the rotary engine are as follows: the center of the triangular rotor revolves around the center of the output shaft while the triangular rotor itself rotates around its own center. During the rotation of the triangular rotor, the internal gear ring centered on the triangular rotor meshes with a gear centered on the output shaft. The gear is fixed to the engine block and does not rotate, with a gear ratio of 3:2 between the internal gear ring and the gear. The above movement relationship causes the trajectory of the triangular rotor's vertices (i.e., the shape of the cylinder wall) to resemble a figure '8'.
7
3
Share

What is the drive system of the Mercedes-Benz E-Class?

The drive system of the Mercedes-Benz E-Class is front-engine, rear-wheel drive (FR). Front-engine, rear-wheel drive means the engine is positioned at the front and the rear wheels are driven. This is the most traditional drive configuration, and today, some cars (especially high-end sedans) and some buses still use this drive system. Classification of drive systems: The arrangement of the automobile transmission system is related to the position of the engine and the drive form. It can generally be divided into four types: front-engine, front-wheel drive (FF); front-engine, rear-wheel drive (FR); rear-engine, rear-wheel drive (RR); and mid-engine, rear-wheel drive (MR). Advantages of the front-engine, rear-wheel drive configuration: The axle load distribution is relatively balanced, which provides good handling stability and ride comfort, and helps extend the service life of the tires.
10
4
Share

How is the Renault M9T Engine?

Renault-Nissan Alliance's M9T engine has been equipped in overseas diesel versions of the NAVARA model. Below is a detailed introduction to the engine: 1. Configuration: This model has a maximum power of 120kW and a maximum torque of 380N·m. It is tuned under Nissan's unified standards, offering advantages such as fast acceleration, strong climbing ability, and excellent loading capacity. 2. Economy: This engine also performs commendably in terms of fuel economy and NVH (Noise, Vibration, and Harshness). Its combined fuel consumption per 100 kilometers is only 7.3 liters, which is about 5% lower than vehicles in the same class, saving 1-1.5L per 100 kilometers. Additionally, this engine will change your preconceived notion about diesel engines being noisy. It adopts the original design of the Renault-Nissan Alliance, featuring low vibration and a noise level of only 67 decibels, achieving performance comparable to gasoline engines.
19
3
Share

Where is the OBD interface located on the Chery Fengyun 2?

There is a cover panel in front of the driver's left leg. After removing it, look at the topmost part inside, and you will find the OBD interface of the Chery Fengyun 2 there. Meaning of the OBD interface: The OBD interface is also known as the computer interface. OBD stands for On-Board Diagnostics in English, and it is translated as "on-board diagnostic system" in Chinese. The placement of the OBD interface varies depending on the type of vehicle, and this needs to be determined based on the specific model. Function of the OBD interface: When a problem occurs with the vehicle, the OBD system stores the fault information in memory. Technicians can then read the relevant information in the form of fault codes using standard diagnostic equipment.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.