What is the best engine oil for Audi Q7 maintenance?

2 Answers
VincentAnn
07/29/25 6:23am
Audi Q7 originally uses 0W30 full synthetic engine oil. For later maintenance, Castrol Edge 0W30 can also be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperature conditions. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, and the smoother the cold start of the car will be. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better it can maintain viscosity at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil of an Audi Q7 is as follows: Wait for the engine temperature to drop, and also allow the oil to flow back to the oil pan; Use a wrench to loosen the oil drain plug, and use an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to flow out; Use a special wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine valve cover. Generally, fill up to three-quarters of a barrel of oil; Start the engine and let it run for 5 minutes, then check for oil leaks around the oil drain plug and oil filter. If there are any leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
Was this review help?
1
0
Share
DelDaisy
08/12/25 9:48pm
I've been driving an Audi Q7 for almost four years now, and I've found that choosing the right engine oil during maintenance is particularly important, otherwise the engine is prone to problems. I always use Castrol Edge 0W-30 fully synthetic oil, which meets Audi's VW 502 00 standard. It allows for quick cold starts in winter and makes driving much smoother. I previously tried cheaper semi-synthetic oil and noticed a drop in fuel efficiency and increased engine noise, so I stick to changing it every 8,000 kilometers or so. I advise car owners not to skimp on small expenses and to use qualified brands to avoid engine wear, always checking the viscosity requirements in the manual. Additionally, when driving in high-temperature areas, the oil should also prevent oxidation to protect the engine internals. Overall, choosing good engine oil makes the car more durable and saves on long-term repair costs.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Is It Necessary to Use Fully Synthetic Engine Oil for Cars?

It is necessary to use fully synthetic engine oil for cars. Fully synthetic oil offers better high and low-temperature performance, has a longer oil change interval, and performs better under harsher driving conditions. It has superior high-temperature resistance and is more effective at removing carbon deposits. Oxidation Stability of Fully Synthetic Engine Oil: Synthetic engine oil boasts exceptional oxidation stability, with its oxidation resistance being about 25% higher than that of conventional fully synthetic oil. This allows for more effective control over oil oxidation and degradation, extending the oil change period. Detergent and Dispersant Properties of Fully Synthetic Engine Oil: Synthetic engine oil features top-tier detergent and dispersant properties, with performance over five times that of mineral oil. It effectively reduces deposit formation, prevents engine wear, maintains robust engine power, and lowers fuel consumption.
11
2
Share

Can the Little Turtle King 60V be registered?

The Little Turtle King electric vehicle is classified as an electric motorcycle, and electric motorcycles cannot be registered. Below is relevant information: Which electric vehicles can be registered: When purchasing an electric vehicle, citizens should first check the "Vehicle Manufacturer and Product Announcement" from the Ministry of Industry and Information Technology. Pure electric vehicles whose models cannot be found in the announcement cannot be registered or driven on the road. If unregistered electric vehicles are driven on the road, the driver will be penalized for driving without a vehicle license plate. License Plate: A license plate, commonly known as a vehicle plate, refers to the plates hung on the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information.
20
0
Share

What does 'mooe' mean in Chinese on a car?

On a car, 'mode' generally means pattern or direction. With the increasing number of car functions nowadays, most manufacturers use English abbreviations to label function buttons, which can be slightly inconvenient for some car owners without a basic understanding of English. Additional information: 1. From a literal perspective, 'mode' translates to pattern or direction in Chinese, and the mode button is commonly found on multifunction steering wheels and center consoles. 2. If the mode button is on the multifunction steering wheel, it is basically a button for switching between car multimedia modes, such as FM radio, AM radio, CD, or USB. 3. When playing the radio, CD, or an external audio source, pressing the MODE button will synchronize the display between the tachometer and speedometer with the MMI system. Then, by using the buttons to the left of the MODE button, you can scroll through and select songs on the central display screen. Pressing the wheel down will confirm the song change. Pressing the MODE button again will switch back to normal mode.
8
4
Share

What lights should be turned on when obstructing traffic and difficult to move?

When a breakdown occurs, the 'hazard warning lights' must also be activated. Below is the relevant introduction: Regulations: If a motor vehicle breaks down on the road and needs to stop to fix the problem, the driver should immediately turn on the hazard warning lights and move the vehicle to a place where it does not obstruct traffic; if it is difficult to move, the hazard warning lights should remain on continuously, and warning signs should be set up in the direction of oncoming traffic to increase the warning distance. If necessary, the police should be called promptly. Details: When driving at night and the headlights are on, the 'position lights' are also turned on. The 'position lights' do not need to be turned on separately or specifically. In case of a breakdown, the 'hazard warning lights' must also be activated to alert vehicles behind. Additionally, a 'warning triangle' must be placed about 100 meters behind the vehicle to warn approaching vehicles. All occupants of the vehicle should move outside the traffic lane.
11
4
Share

Why Do Diesel Vehicles Use Urea?

Diesel vehicles use urea to reduce exhaust emissions and protect the atmospheric environment. Here are the relevant details: Adding urea to diesel vehicles helps convert harmful nitrogen oxides in the exhaust into nitrogen and water, thereby reducing hazardous emissions. The main components of a diesel engine include: 1. Engine block, consisting of the cylinder block, cylinder liner, cylinder head, cylinder gasket, oil pan, flywheel housing, timing gear housing, and front/rear mounts. 2. Crankshaft linkage mechanism, comprising the crankshaft, connecting rod, piston, and piston pin. 3. Valve train, made up of the timing gear, camshaft, tappet, pushrod, and rocker arm. 4. Fuel system, including the diesel tank, fuel line, diesel filter, fuel injection pump, and fuel injector. 5. Lubrication system, consisting of the oil pump, oil filter, pressure regulator, pipelines, gauges, and oil cooler.
14
3
Share

What kind of sound is engine piston pin abnormal noise?

Engine piston pin abnormal noise is a dull and uncontrolled sound. The noise location is in the upper part of the cylinder, and the sound is similar to the collision of two steel balls. Consequences of engine piston pin abnormal noise: If the piston pin abnormal noise is severe, it will damage the piston pin bushing, increase the wear of the connecting rod bearing and the crankshaft connecting rod journal, and in the most severe cases, it may break the piston pin or the top of the connecting rod may damage the cylinder block. Methods to determine engine piston pin abnormal noise: The method of determination is to conduct a cylinder-by-cylinder fuel cut-off test. After the fuel is cut off, the sound will significantly weaken or disappear, and it will become more obvious when the fuel supply is restored. When the throttle is rapidly jiggled, the abnormal noise will be quite obvious, and the noise cycle will change with the engine speed.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.