What is the battery replacement tutorial for the Mercedes-Benz CLS300 key?
4 Answers
Mercedes-Benz CLS300 key battery replacement tutorial is: Remove the mechanical key, insert the mechanical key into the slot at the paddle position, apply slight force, the back cover will pop up, then remove the depleted old battery and replace it with a new one. Taking the 2021 Mercedes-Benz CLS300 as an example, it is a mid-to-large-sized car with body dimensions of: length 4988mm, width 1890mm, height 1424mm, and a wheelbase of 2939mm. The 2021 Mercedes-Benz CLS300 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 184PS, maximum torque of 280Nm, and maximum power of 135kW, paired with a 9-speed automatic transmission.
I just replaced the battery in my Mercedes CLS300 key fob last week, and it was actually quite simple. First, locate the small notch on the back of the key fob. I used a coin to gently pry it open, being careful not to apply too much force to avoid cracking the plastic casing. Inside, you'll find a CR2032 coin battery—just remove the old one. I bought a new CR2032 battery from a nearby supermarket, making sure it was a genuine brand. When inserting the new battery, ensure the positive side faces up and aligns with the slot. Close the casing until you hear a click, indicating it's securely locked. Then, test the key fob by pressing the buttons to check if the car unlocks and the lights respond normally, confirming it's working. The whole process took less than 5 minutes. Key fob batteries typically last about two years, so regular checks can prevent sudden power failures. I once made the mistake of prying too hard and scratched the key, so I recommend using a plastic card for safer handling.
As a little enthusiast who often helps friends with car repairs, changing the battery in a Mercedes CLS300 key is a piece of cake. The key is designed to open easily, with a notch on the back edge—just pry it open with a thin metal piece. Inside, the battery is a standard CR2032; after removing the old one, clean the metal contacts to prevent oxidation. When buying a new battery, don’t skimp—choose genuine Panasonic or Duracell. During installation, align the positive side with the plus mark inside the battery compartment and press it gently into place, avoiding reverse insertion. Before closing the cover, ensure the seams align and snap it shut firmly. Remember to immediately test the remote door lock function. There’s no real technical skill involved, but be careful not to bend the delicate parts of the key—I always use a magnifying glass to inspect the contacts closely. The battery lasts about 24 months, shorter if you drive frequently. It’s best to keep a spare battery in the glove box for emergencies.
I've replaced the battery in my Mercedes-Benz CLS300 key several times. First, ensure the car is properly locked for safety. Locate the notch on the key and gently pry it open with a small screwdriver. Remove the old CR2032 battery, being careful not to lose any small components. When purchasing a new battery, double-check the model to avoid buying the wrong size. Insert the new battery with the positive side facing up, then close the cover and press lightly to lock it in place. Test the key to unlock the car; if it doesn't work, the contacts might not be aligned properly. I make it a habit to replace the battery every two years to avoid any embarrassing situations when out and about.
