What is the battery model specification for the Jeep Cherokee?

1 Answers
VanKate
07/30/25 1:15am
The battery specification for the Cherokee is 60ah-55d23l, with a capacity of 60Ah. The charging current for car batteries is one-tenth of the battery capacity (10-hour charging rate). For a 24AH battery, it should be fully charged within 16 hours when using a 1.5A current. Here is some information about the battery model specifications for the Jeep Cherokee: 1. The larger the AH of the battery, the longer the driving distance. The V number should remain stable, as an excessively high V number can damage the controller. 2. The brand of the Cherokee car battery is VARTA. Generally, car batteries come in specifications such as 6V100AH, 6V120AH, 12v100AH, and 12V120AH.
Was this review help?
9
4
Share
More Forum Discussions

Can the belt of the Dolphin be replaced with a chain?

The belt of the Dolphin cannot be replaced with a chain. Reasons: Chains are mainly divided into two types: sleeve roller chains and toothed chains. Among them, roller chains are affected by their inherent structure, resulting in relatively more noticeable rotation noise compared to timing belts. The transmission resistance and inertia are also correspondingly greater. The tension of the belt is achieved through an automatic tensioner wheel, while the chain relies on a special, wear-resistant tensioning mechanism for automatic tensioning. If you want to replace the timing belt with a timing chain, the automatic tensioning mechanism must also be replaced, which incurs higher costs. Function: Both timing belts and timing chains are power transmission devices in cars. The power generated by the engine needs to be transmitted through them to drive the car forward. Replacement Notes: Over time, belts may age or break. Generally, belts should be replaced every three years or 50,000 kilometers to ensure driving safety.
8
2
Share

Why does the car shake and have unstable idle speed when the air conditioner is turned on?

Unstable idle speed and shaking when the air conditioner is on can be caused by carbon deposits, high pressure, and other reasons. Throttle Body: Severe carbon deposits in the throttle body can block the normal air intake of the engine. Insufficient engine power makes it difficult to drive the compressor, or it can only barely do so. When the air conditioner is turned on, the engine load increases, and the throttle opening expands. At this point, the issue of dirt is magnified, causing the throttle to stick or fail to open to the appropriate position, resulting in restricted air intake. Compressor: If the compressor pressure is too high, the increased engine load will affect the car's stability. Solution: Regularly clean the throttle body and carbon deposits in the engine to avoid high compressor pressure.
8
4
Share

How to Remove the Rear Bumper of Changan Yuexiang V7?

Yuexiang V7 rear bumper removal method is as follows: 1. First and foremost, prepare all the tools required for the entire bumper removal process before starting the operation. 2. Removal of the rear taillight. Open the trunk lid and carefully observe the rear taillight. You will notice two small black covers on the edge of the taillight. First, remove these two small black covers. Use a flathead screwdriver to pry them off. Be extremely cautious during this process to avoid scratching the surface. Keep the removed small black covers safe. 3. After prying off the small black covers, store the removed screws properly for later reinstallation. 4. Hold the rear taillight with your hand and pull it outward to separate it from the car body's light socket. Then locate the wiring harness of the rear taillight and unplug the connector by hand. There are two small movable clips on both sides of the connector. Press them with your hand and pull outward to disconnect.
17
0
Share

Is the red terminal of a car battery positive or negative?

The red terminal of a car battery is positive, while the negative terminal is black. It's crucial not to reverse the connections when wiring. Reversed connections can damage all electronic devices in the vehicle. There are + and - signs marked near the battery terminals. Here's more relevant information: 1. About car batteries: The battery is an important component in a vehicle. When the engine isn't running, the battery powers all electronic devices in the car and is also responsible for starting the engine. After the engine starts, the alternator takes over to power the electronic devices and simultaneously charges the battery. 2. Battery performance: During engine startup, the starter motor requires operation, which demands the battery to release a significant current. This tests the battery's performance. If the battery performs poorly, the starter motor's rotation speed will be too low, preventing successful engine startup. The battery is a wearable part that requires regular replacement, as its performance degrades with increasing charge-discharge cycles.
8
0
Share

How to Operate Car Air Conditioning for Cooling?

Car air conditioning cooling operation steps are: first start the car, turn on the cold air, press the AC button, and adjust the temperature to low. Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing driver fatigue and improving driving safety. Car air conditioning generally includes refrigeration devices, heating devices and ventilation devices. This combined device makes full use of the limited space inside the car, has a simple structure, and is an internationally popular modern car air conditioning system.
11
2
Share

What are the causes of transmission oil leakage in small cars?

Transmission oil leakage in small cars can be caused by issues such as aging lines. Factors causing oil leakage at the oil seal neck: Oil seal aging and deformation, oil seal spring detachment, or incorrect installation direction of the oil seal can all cause the oil seal to lose its oil-blocking function. The aged or deformed oil seal should be replaced. Line factors: If the lines are damaged, oil may leak from the damaged part of the pipeline during circulation. Factors at the gearbox joint surface: If the joint surface of the gearbox is damaged, an appropriately thickened paper gasket should be added at the damaged area. If oil leakage persists, welding repair should be performed. Function of transmission oil: Transmission oil serves purposes such as lubrication, cooling, and rust prevention. Leakage of transmission oil can cause significant damage to various components of the transmission, so regular maintenance is essential.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.